Watchguard AP430CR User manual

Quick Start Guide
WatchGuard®AP
AP430CR
Pole Mount
Clamps
Wall Mount Screws
ACTIVATE YOUR AP
GO TO:
watchguard.com/activate
MOUNT THE AP CONNECT THE AP
32
1
WALL MOUNT
Plug one end of the Ethernet cable from your network
into the LAN 1 (PoE+) port on the bottom of the AP.
Make sure the other end of the Ethernet cable is
connected to your network through a hub, switch, or
injector with PoE+ (802.3at) power enabled.
Access Point connected to PoE+ injector
Access Point connected to switch with PoE+ power
POLE MOUNT
PoE+
Ground
Screw
Wall and Pole
Mount Screws
DEG
DIM
REV DESCCRIPTION LOCATION SIGN DATE
A Peter 11-May-21
A0
UNIT SCALE SHEET MODEL No. AP430CR
MM 0,333 1 of 1 PART NAME POLE MOUNT
APPROVED CHECKED DESIGNED PART No. REV A
Tony Peace Peter
11-May-21 11-May-21 11-May-21
ANGLE
A B C D
0-5 0.02 0.05 0.10 0 -30 0.1
5-10 0.05 0.10 0.15 31 -60 0.3
10-50 0.10 0.15 0.20 61 -90 0.5
50-100 0.15 0.20 0.25
100- 0.15% 0.20% 0.25%

ADDRESS: 505 Fifth Avenue South, Suite 500, Seattle, WA 98104
U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895
WEB: www.watchguard.com
© 2021 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware,
and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or
other countries. All other trademarks and tradenames are the property of their respective owners.
P.N. 352-4430-001 Rev A 060921
1.877.232.3531
(U.S. and Canada)
WATCHGUARD TECHNICAL SUPPORT
+1.206.613.0456
(all other countries)
www.watchguard.com/support
TOP
REAR
CHECK AP LED STATUS
NOTICES:
All WatchGuard products are designed and tested to meet strict safety requirements. These requirements
include product safety approvals and other global compliance standards. Please read these instructions
carefully before operating the product, and refer to them as needed to ensure the continued safe
operation of your product.
Additional information, including a full list of safety approvals, global compliance standards, and
certications can be found in the Hardware Guide for this device located on the WatchGuard website:
https://www.watchguard.com/wgrd-help/documentation/hardware-guides
For patent information, please visit http://www.watchguard.com/patents
Safety Warning
If protective earthing is used as a safeguard, the instructions shall require connection of the equipment
protective earthing conductor to the installation protective earthing conductor (for example, by means of
a power cord connected to a socket-outlet with earthing connection). To meet safety and electromagnetic
interference (EMI) requirements, you must make sure the power source is connected to earth ground
before you connect power to the AP.
POWER REQUIREMENTS
• PoE+ (802.3at) (54V DC, 0.6A)
CONFIGURE THE AP
5
GO TO:
watchguard.com/start
Declaration of Conformity
WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the
European Union directives and standards identified in this declaration.
Product (s):
802.11 a/b/g/n/ac/ax Access Point, AP430CR
EU Directive(s):
Low Voltage (2014/35/EU)
Electromagnetic Compatibility (2014/30/EU)
Energy-related Products (2009/125/EC)
RoHS (2011/65/EU and 2015/863/EU RoHS)
WEEE Directive 2012/19/EU
The Radio Equipment Directive (2014/53/EU)
Common Standard(s):
EN 62368-1:2014+A11:2017 Safety for ITE
EN 55024:2010
EN 55024: 2010+A1:2015
Immunity for ITE
EN 55032:2015+A11:2020
EN 55035: 2017/A11:2020
EN 61000-3-2:2014 Harmonics
EN 61000-3-3:2013 Flicker
Wireless Standard(s):
EN 62311:2008
EN 301 489-1 v2.2.3 (2019-11) EMC and Radio Spectrum Matters
EN 301 489-17 v3.1.1 (2017-02) EMC and Radio Spectrum Matters
EN 300 328 v2.2.2 (2019-07) Radio Spectrum Matters
EN 301 893 v2.1.1 (2017-05) Broadband Radio Access Networks
EN 50385: 2017
This device complies with Directive 2014/53/EU issued by the Commission of the European Community.
Manufacturer / Hersteller: WatchGuard Technologies
505 5th Ave S. Suite 500, Seattle, WA 98104 USA Radio
Equipment / Funkanlage: 802.11 a/b/g/n/ac/ax Access Point
Type Designation / Typenbezeichnung: AP430CR
Specifications / Technische Daten: 802.11a,b,g,n,ac,ax (2.4Ghz & 5GHz)
Intended Purpose / Verwendungszweck: Outdoor access point
Equipment Class / Betriebsmittel der Klasse: Class II
Operating temperature -30° C to 60° C
The above device complies with the essential requirements and other relevant provisions to Directive
2014/53/EU when used for its intended purpose. This equipment may be operated in the USA, Canada, & Europe Union.
Warning! This is a Class B product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
Frequency range (MHz)
Max. Transmit Power (W)
Bluetooth
0.00794
WLAN Wi-Fi 802.11x; 2, 4 GHz
0.09418
WLAN Wi-Fi 802.11x; 5 GHz
0.86896
Restrictions: France (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à
l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) De
plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux
(c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage
et/ou des dommages aux dispositifs LAN-EL.
Die oben genannten Gerät entspricht den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinie
2014/53/EU, wenn für den vorgesehenen Zweck verwendet werden. Dieses Gerät ist für die Verwendung in den USA, Kanada, and
Europäische Union.
Warnung! Dies ist eine Einrichtung der Klasse B. Diese Einrichtung kann im Wohnbereich Funkstörungen verursachen. In diesem
Fall kann vom Betreiber verlangt werden, angemessene Maßnahmen durchzuführen
Einschränkungen: Frankreich –(i)-Geräte, die im Band 5150-5250 MHz ist nur für den Innenbereich, um das Risiko von Störungen
des mobilen Satelliten-Systeme, die die gleichen Kanäle (ii) Darüber hinaus reduzieren vorbehalten, sollten Benutzer auch darauf
hingewiesen werden, dass die Nutzer von Hochleistungs-Radare bezeichnet werden primäre Benutzer (dh d. sie haben Priorität) der
Bänder 5 250-5 350 MHz und 5 650-5 850 MHz und dass diese Radargeräte können Störungen und / oder Schäden an LE-LAN-
Geräten verursachen.
Signature
Full Name: Laurence Huang
Position: Manufacturing Program Manager Date: May 15, 2021
4
Antenna Options
WG9004 Dual-Band Omni Antennas (5/7 dBi)
LED Color Status
Solid Orange AP is booting (Permanent orange indicates a
hardware failure)
Flashing Orange AP cannot connect to WatchGuard Cloud
AP did not receive an IP address from DHCP
Solid Blue AP is online
Flashing Blue Flash LED option selected in WatchGuard Cloud
Manage APs with
WatchGuard Cloud
BOTTOM
Power Options
WG8602 (AU), WG8601 (UK), WG8600 (EU), WG8599 (US) WatchGuard 802.3at PoE+ Injector with AC cord
To protect your outdoor AP from electrical events, we recommend you ground the AP with the included ground
wire based on your local regulations.
Um Ihren AP im Außenbereich vor elektrischen Problemen zu schützen, empfehlen wir, den AP gemäß den lokalen
Vorschriften mit dem bereitgestellten Erdungskabel zu erden.
Para proteger su PA exterior de eventos eléctricos, recomendamos que lo conecte a tierra con el cable de conexión a
tierra incluido, según sus regulaciones locales.
A m de proteger seu AP para ambientes externos contra eventos elétricos, recomendamos aterrá-lo com o o de
aterramento incluído conforme a regulamentação local.
Per proteggere l’AP da fenomeni elettrici, si raccomanda di collegarlo a terra con l’apposito cavo incluso nella
confezione ai sensi delle normative locali.
Pour protéger votre point d’accès extérieur des événements électriques, nous vous recommandons de le raccorder à
la terre à l’aide du câble de terre fourni, conformément aux réglementations locales.
 為了保護室外AP不受電氣事件影響，建議您根據當地法規使用內含的接地線對AP進行接地。
야외AP를전기사고발생위험으로부터보호하려면지역별규정에따라AP를동봉된접지와이어로
접지하는것이좋습니다.
 屋外用APを落雷や感電などの事故から守るために、地元の規制に従って、付属の接地線を使用してAPの
接地を行うことをお勧めします。
 为了保护您的户外AP免受电气活动的影响，我们建议您根据当地的法规，使用随附的地线将AP接地。
Ground Screw