Waterpik Water Flosser WP-450 User manual

QUICK START GUIDE
1
3 4
OFF
Plug
in
Insert
2
I
I
II
O
Remove
Plug
Turn power
switch OFF (O),
plug power cord
into outlet, and
insert the charging
cord into the unit.
Lift the flip top on
reservoir and fill
with lukewarm
water. Refill as
needed.
Unplug
charging
cord from
unit prior to
filling with
water and
during use.
Select the appropriate
tip and insert into the unit.
Press firmly until the tip
clicks into place.
Caution: Do not
press tip eject button
while unit is running.
continued on back
To increase water
pressure move to
HI (II) setting.
For first time use,
adjust the pressure
setting to the
LOW (I) setting
Model WP-450
I
I
II
O
LOW
Pressure
Setting
Charge Unit for 24 Hours
Prior to First Use. Insert Tip:
Fill the Reservoir: Adjust Water Pressure:

6Technique Tips for Best Results:
5
I
I
II
O
Keep unit upright
during use to
ensure continuous
water flow.
Lean over sink and
close lips enough to
prevent splashing,
while still allowing
water to flow from
mouth into the sink.
Turn unit ON (I).
Aim the tip just above the gumline at
a 90 degree angle.
Always place tip
in mouth before
turning unit on.
Starting with the back teeth, follow the
gumline and pause briefly between teeth.
Continue until all areas around and
between teeth have been cleaned.
I
I
II
O
For product questions and spare parts, please contact
Waterpik International customer services on: [phone]
www.waterpik.co.uk
©2009 Water Pik, Inc.
FN20013324-F AA
On/Off Procedure:
I
I
II
O
7REGISTER
YOUR
PRODUCT
ONLINE NOW!
Receive up to
£45
in savings.
www.waterpik.co.uk/
registration