Waterpik waterflosser WP-861 User manual

Insert
8
6
Water ON
1
Fill reservoir with
warm water and
replace it firmly
on the base.
Insert tip firmly until
it clicks into place.
Turn pressure to high, point
tip into sink, turn power
and water switches onuntil
water flows to prime unit.
QUICK START GUIDE
Review full instruction book prior to first use
FIRST USE
©2016 Water Pik, Inc.Model WP-861
This device is only compatible with voltages of 100-240VAC, 50/60 Hz
2
4
6
8
10
ON
High

Water ON
8
6
3
4
2
Turn power and water on.
Start on low pressure and
increase to your liking.
Close lips enough to
prevent splashing,
while still allowing
water to flow from
mouth into the sink.
Aim water at the gumline
at a 90° angle. Follow
the gumline and pause
briefly between
teeth.
TO AVOID MESS: PLACE THE
TIP IN YOUR MOUTH BEFORE
TURNING UNIT ON
QUICK START GUIDE
Review full instruction book prior to first use
START WATER FLOSSING
TECHNIQUE
LEAN OVER SINK
©2016 Water Pik, Inc. 20020370-F AAModel WP-861