Waterpik WP-600 Series User manual

This device is only compatible with voltages of 230VAC, 50Hz ©2019 Water Pik, Inc.
Unit Prep
1
WP-600 Series
QUICK START GUIDE
Fill reservoir with
warm water and
replace it firmly
on the base.
ON
OFF
Floss
Massage
•
2
•
4
•
6
•
8
•
1
0
Turn pressure to high, point
tip into sink, turn power and
water switches ON until water
flows. Turn switches OFF.
Insert tip until
it clicks into
place.
ON
OFF
•
2
•
4
•
6
•
8
•
1
0
HIGH
FILL

TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
FN 20020037-F AB
Massage
Floss
•
2
•
4
•
6
•
8
•
1
0
Floss
Massage
•
2
•
4
•
6
•
8
•
1
0
Water Floss
2
Turn water ON. Close lips
enough to prevent splashing,
while still allowing water to
flow from mouth into the
sink. Increase pressure to
your liking.
Aim water at the gumline
at a 90 degree angle. Follow
the gumline and pause
briefly between teeth.
Start on low pressure.
Turn power ON.
WP-600 Series
QUICK START GUIDE
POWER
ON
LOW