Waterpik Sonic-Fusion SF-01 User manual

Model SF-01 | SF-02
QUICK START GUIDE
SONIC–FUSIONTM
This device is compatible with voltages of 100-240 VAC, 50-60 Hz ©2019 Water Pik, Inc.
Getting Started (First time use only)
Place ossing brush head rmly
into place. Press the power
handle onto hose attachment.
Fill reservoir with warm water and
replace it rmly on the base.
Prime Unit
Turn pressure to high, point tip into
sink and press the FLOSS button
until water ows. Turn off.
1
•
8
•
6
•
0
Fill
Charge for at least
20 minutes before
rst use.
Click
Brush
Floss
Brush
Floss
High
Floss
Mode
Clean
Whiten
Massage
CHARGE
•
8
•
6
•
4
•
2
•
Brush
Floss

Model SF-01 | SF-02
QUICK START GUIDE
SONIC–FUSIONTM
FN 20026344-F AAIN3546a
3 Modes
Helpful Tip
Brush
Press BRUSH button, use light
pressure and clean all tooth surfaces.
Floss
Press FLOSS button, keep lips partially
closed to allow water to ow into sink.
Brush + Floss
Press BRUSH button, then press
FLOSS button.
The Wireless connection to use Floss
mode turns off aer 10 minutes of
inactivity (blue light turns off). To turn
wireless back on, simply place the
power handle in the charging base and
then remove. Blue light will turn on.
•
8
•
6
•
4
•
2
•
Brush
Floss
Blue
Light