weBoost Home 4G User manual

NEED HELP? support.weboost.com 866.294.1660
User Manual
Cellular Signal Booster
Home 4G
A WILSON ELECTRONICS BRAND

Package Contents
1
Preparation
2
STEP 1-A & B: Connect Inside Antenna To Booster
3
STEP 2-A: Point Outside Antenna Toward Nearest Cell Tower
4
STEP 2-B: Mount Bracket To Outside Antenna
5
STEP 3: Route & Connect Cable To System
7
STEP 4: Power Up The Booster
8
Measuring Booster Performance
9
Light Patterns
11
Troubleshooting
12
Safety Guidelines
14
Specifications
15
Warranty
16
______
Index

1
HOME 4G CELL PHONE SIGNAL BOOSTER
______
Package
Contents
Home 4G Inside
Antenna
Outside
Antenna
Cable
Connector
Window
Entry Cable
Roof/Pole
Mount
Bracket
Wall Mount
Bracket
Power
Supply
30' Cables
Qty. 2

2CELL PHONE SIGNAL BOOSTER HOME 4G
______
Preparation
NOTE: These instructions will walk you through a “soft” install process to find
the optimal locations for the inside and outside antennas, then through the
process of the permanent installation.
You Will Need (tools not included)
Make sure the following materials are prepared and ready for your
installation.
Ladder
Phillips-head screwdriver
10mm open-end wrench or adjustable wrench
Drill (if routing cable through wall)
1.25”-2” diameter pole existing pole (or order #901117)
Recommended: Power Strip with surge protection
1 to 2 hours
2 people (a person to help with antenna calibration)

3
HOME 4G CELL PHONE SIGNAL BOOSTER
NOTE: Do not connect booster to power until the system is fully installed.
______
Step 1-A & B: Connect Inside
Antenna To Booster
Connect Inside Antenna cable to the bottom port on Home 4G booster
labeled ‘INSIDE’ and place Inside Antenna in weak signal area at least 18
inches away from booster.
Inside
Antenna
Booster

4CELL PHONE SIGNAL BOOSTER HOME 4G
______
Step 2-A: Point Outside
Antenna Toward Nearest
Cell Tower
Point the Outside Antenna toward the nearest cell phone tower. To find the
nearest tower, use an app such as ‘Open Signal’. This is the most critical step
of the installation process because it will determine the overall performance
of the booster system.
Cell Tower
Outside Antenna
NOTE: The Outside Antenna must be at least
20 feet horizontal or 50 feet vertical from the Inside
Antenna for best performance. Make sure the Inside
Antenna and Outside Antennas are setup so they are
facing away from each other.
f
a
c
i
n
g
a
w
a
y

5
HOME 4G CELL PHONE SIGNAL BOOSTER
______
Step 2-B: Mount Bracket To
Outside Antenna
Pole Mounting and Wall Mounting Options are included. The pole mounting
option is preferred because it would be easier to adjust to the direction
of the cell tower.
Attach the L-Bracket to the Outside Antenna and use the U-Bolts/Pole Bracket
to attach the L-Bracket to a pole.
NOTE: Mounting on existing roof exhaust pipe would
be a good time-saver option.
Cell Tower
Outside Antenna
Pole
(1.25”-2.0”dia.)
U-bolt &
Pole Bracket
L-Bracket
Pole Mounting Option

6CELL PHONE SIGNAL BOOSTER HOME 4G
______
(STEP 2-B cont.)
Drill holes using
3/16 inch bit
Tap anchors in
Fasten bracket to back
of Outside Antenna Secure bracket to wall
mounting
Outside Antenna
on wall bracket
sideview
Wall Mounting Option

7
HOME 4G CELL PHONE SIGNAL BOOSTER
______
Step 3: Route & Connect
Cable To System
Connect the white RG-6 Cable to Outside Antenna and route cable
into the home. All connections should be hand tightened only.
A Window Entry Cable is provided to help make cable entry easier. Route
cable to the Home 4G booster and connect to top port labeled ‘OUTSIDE’.
Outside
Antenna
Inside
Antenna
Outside
Antenna
Cell
Tower
Inside
Antenna
RG-6 Cable RG-6 Cable
Window
Entry Cable
Booster
Window Entry Cable
Booster

8CELL PHONE SIGNAL BOOSTER HOME 4G
______
Step 4: Power Up The
Booster
Plug the Power Supply into wall outlet then connect to Home 4G
Booster and enjoy your boosted cell signal!
Outside
Antenna
Outside
Antenna
Cell
Tower
Inside
Antenna
RG-6 Cable RG-6 Cable
Window
Entry Cable
Booster
to power
Inside
Antenna
Power Supply
Window Entry Cable
50 FEET HORIZONTAL OR 20 FEET
VERTICAL DISTANCE
Booster