weBoost eqo User manual

Install
Guide

HOW DOES EQO WORK?
eqo receives a cell signal from the tower, amplifies it, and sends it over coax
cable to the antenna. The antenna broadcasts the amplified signal making it
available to devices inthe home.
Get ready
for a great signal.
Follow these easy steps and EQO wil be boosting
your signal in no time. EQO technology - the solution
for a strong, reliable cell signal.
For more information refer to our Full Install Guide at:
https://cellphonesignalbooster.us
PACKAGE CONTENTS
EQO
Booster
EQO
Antenna
Coax
Cable
Power
Supply

Coax Cable
6 ft.
Power Cable
Coax Cable
-90dB
For optimal signal boost, place the EQO booster in the
room of your home that has the strongest cell signal.
Please refer to our Full Install Guide for more options on how
to properly install your booster: https://cellphonesignalbooster.us
Congratulations! Once your booster is running, please allow some time for your
phone to adjust to your new signal.
Read more about it here at https://cellphonesignalbooster.us
Quick Install
Guide
Step 2
Step 3
Step 5
HOW TO MEASURE YOUR CELL SIGNAL
Connect the supplied Coax Cable and
Power Supply on the side of the Booster.
Place the Antenna where you need to boost your
signal. It should face the same direction as the
Booster and stand at least 6 feet away from it.
Connect the Power Supply to a surge protected
AC power strip with at least 1000 Joule rating.
Step 1
Place your Booster in the area with the
strongest cell phone signal. The LED light
should be facing into the room.
Step 4
Connect the other end of the Coax Cable to
the Antenna.
https://cellphonesignalbooster.us/blog/field-test-mode-an-
overview-enabling-it-on-your-phone/
Place your phone in test mode so thenumerical signal strength
can be read. For help in finding the test mode for your phone
please go to:
-80dB

Please register your product. Contact our U.S. Based
Customer Support
https://cellphonesignalbooster.us
800-501-3153
MON - FRI: 10:30 AM to 5:30 PM CST T
FOR ADDITIONAL INFORMATION PLEASE REFER TO OUR FULL INSTALL GUIDE
You are
almost there. ANY
QUESTIONS?
IMPORTANT NOTICE: Connect your EQO Booster
AC Power Supply to a surge protected AC power
strip with at least a 1000 Joule rating. Failure to
do this will void your warranty in the event of a
power surge or lightning strike.
This device may be operated ONLY in a fixed location for in-building
use. The signal booster unit is designed for use in an indoor,
temperature controlled environment ( > 150 degrees Fahrenheit)
!
!
?
WHAT COLOR IS YOUR LIGHT?
Booster is operating
seamlessly
Booster is too close to
an external signal. Try
changing its location.
Booster is too close to
the Antenna. Try
increasing the distance.