Welch Allyn GS 900 User manual

1
GS 900 on Mobile Stand Assembly Instructions

2
GS 900 on Mobile Stand Assembly Instructions
Ships in 3 boxes

3
GS 900 on Mobile Stand Assembly Instructions
(2) wheels with brakes
(2) wheels without brakes

4
GS 900 on Mobile Stand Assembly Instructions
(2) wheels with brakes
go through the ring cable
(2) wheels without brakes

5
GS 900 on Mobile Stand Assembly Instructions
Place wheels with brakes through ring cable and
insert completely

6
GS 900 on Mobile Stand Assembly Instructions
Insert two wheels without brakes completely

7
GS 900 on Mobile Stand Assembly Instructions

8
GS 900 on Mobile Stand Assembly Instructions
Parts included with Mobile Stand

9
GS 900 on Mobile Stand Assembly Instructions
Tools not included

10
GS 900 on Mobile Stand Assembly Instructions
Insert two screws into pole

11
GS 900 on Mobile Stand Assembly Instructions

12
GS 900 on Mobile Stand Assembly Instructions
Insert the tripod tube so that the recess in the tube is seated in the nose of the tripod base and cannot be rotated any more

13
GS 900 on Mobile Stand Assembly Instructions
Assemble the
winged screw with
the spring washer
and tighten

14
GS 900 on Mobile Stand Assembly Instructions

15
GS 900 on Mobile Stand Assembly Instructions
Remove and discard
grey protective cover

16
GS 900 on Mobile Stand Assembly Instructions
Unscrew the
Phillips/plus-slotted
screw, pull the cover off,
pull cord through the top
opening and insert the
spring arm

17
GS 900 on Mobile Stand Assembly Instructions
Place the disk over spring arm

18
GS 900 on Mobile Stand Assembly Instructions
Place retaining ring over spring arm and secure into the pin groove

19
GS 900 on Mobile Stand Assembly Instructions
Make the electrical connection, tuck wires back inside, replace cover and tighten Phillips/plus screw

20
GS 900 on Mobile Stand Assembly Instructions
Remove and discard
grey protective cover