Welch Allyn Spot Vital Signs LXi User manual

Save/Send Operation
1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or
“Send/Next Reading” in the Navigation window.
2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it
can or will save data in memory if it cannot transfer it. A blank status window will
appear.
Manual Weight, Height, Respiration, Pain Entry
You may enter these parameters if they are enabled in the Internal Configuration
Mode; see Directions for Use manual for details.
1. Press the Navigation buttons to move the arrow in front of the desired parameter
in the Navigation window.
2. Press the Select button.
3. Press the Navigation buttons up to increase values or down to decrease values.
4. Press the Select button to accept the entry.
Memory/Print/Erase Operation
The Memory button allows you to scroll through, print, or erase readings.
1. Press the Memory button. Spot Vital Signs LXi will display the
previous reading.
2. Press the Navigation buttons to select the desired function and press the Select
button. Follow instructions on the display.
705298 Rev. C
Save/Send Operation
1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or
“Send/Next Reading” in the Navigation window.
2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it
can or will save data in memory if it cannot transfer it. A blank status window will
appear.
Manual Weight, Height, Respiration, Pain Entry
You may enter these parameters if they are enabled in the Internal Configuration
Mode; see Directions for Use manual for details.
1. Press the Navigation buttons to move the arrow in front of the desired parameter
in the Navigation window.
2. Press the Select button.
3. Press the Navigation buttons up to increase values or down to decrease values.
4. Press the Select button to accept the entry.
Memory/Print/Erase Operation
The Memory button allows you to scroll through, print, or erase readings.
1. Press the Memory button. Spot Vital Signs LXi will display the
previous reading.
2. Press the Navigation buttons to select the desired function and press the Select
button. Follow instructions on the display.
705298 Rev. C
Save/Send Operation
1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or
“Send/Next Reading” in the Navigation window.
2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it
can or will save data in memory if it cannot transfer it. A blank status window will
appear.
Manual Weight, Height, Respiration, Pain Entry
You may enter these parameters if they are enabled in the Internal Configuration
Mode; see Directions for Use manual for details.
1. Press the Navigation buttons to move the arrow in front of the desired parameter
in the Navigation window.
2. Press the Select button.
3. Press the Navigation buttons up to increase values or down to decrease values.
4. Press the Select button to accept the entry.
Memory/Print/Erase Operation
The Memory button allows you to scroll through, print, or erase readings.
1. Press the Memory button. Spot Vital Signs LXi will display the
previous reading.
2. Press the Navigation buttons to select the desired function and press the Select
button. Follow instructions on the display.
705298 Rev. C
Save/Send Operation
1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or
“Send/Next Reading” in the Navigation window.
2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it
can or will save data in memory if it cannot transfer it. A blank status window will
appear.
Manual Weight, Height, Respiration, Pain Entry
You may enter these parameters if they are enabled in the Internal Configuration
Mode; see Directions for Use manual for details.
1. Press the Navigation buttons to move the arrow in front of the desired parameter
in the Navigation window.
2. Press the Select button.
3. Press the Navigation buttons up to increase values or down to decrease values.
4. Press the Select button to accept the entry.
Memory/Print/Erase Operation
The Memory button allows you to scroll through, print, or erase readings.
1. Press the Memory button. Spot Vital Signs LXi will display the
previous reading.
2. Press the Navigation buttons to select the desired function and press the Select
button. Follow instructions on the display.
705298 Rev. C
Caution: Consult accompanying documents.
MEM
Caution: Consult accompanying documents.
MEM
Caution: Consult accompanying documents.
MEM
Caution: Consult accompanying documents.
MEM
Save/Send Operation
1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or
“Send/Next Reading” in the Navigation window.
2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it
can or will save data in memory if it cannot transfer it. A blank status window will
appear.
Manual Weight, Height, Respiration, Pain Entry
You may enter these parameters if they are enabled in the Internal Configuration
Mode; see Directions for Use manual for details.
1. Press the Navigation buttons to move the arrow in front of the desired parameter
in the Navigation window.
2. Press the Select button.
3. Press the Navigation buttons up to increase values or down to decrease values.
4. Press the Select button to accept the entry.
Memory/Print/Erase Operation
The Memory button allows you to scroll through, print, or erase readings.
1. Press the Memory button. Spot Vital Signs LXi will display the
previous reading.
2. Press the Navigation buttons to select the desired function and press the Select
button. Follow instructions on the display.
705298 Rev. C
Save/Send Operation
1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or
“Send/Next Reading” in the Navigation window.
2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it
can or will save data in memory if it cannot transfer it. A blank status window will
appear.
Manual Weight, Height, Respiration, Pain Entry
You may enter these parameters if they are enabled in the Internal Configuration
Mode; see Directions for Use manual for details.
1. Press the Navigation buttons to move the arrow in front of the desired parameter
in the Navigation window.
2. Press the Select button.
3. Press the Navigation buttons up to increase values or down to decrease values.
4. Press the Select button to accept the entry.
Memory/Print/Erase Operation
The Memory button allows you to scroll through, print, or erase readings.
1. Press the Memory button. Spot Vital Signs LXi will display the
previous reading.
2. Press the Navigation buttons to select the desired function and press the Select
button. Follow instructions on the display.
705298 Rev. C
Save/Send Operation
1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or
“Send/Next Reading” in the Navigation window.
2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it
can or will save data in memory if it cannot transfer it. A blank status window will
appear.
Manual Weight, Height, Respiration, Pain Entry
You may enter these parameters if they are enabled in the Internal Configuration
Mode; see Directions for Use manual for details.
1. Press the Navigation buttons to move the arrow in front of the desired parameter
in the Navigation window.
2. Press the Select button.
3. Press the Navigation buttons up to increase values or down to decrease values.
4. Press the Select button to accept the entry.
Memory/Print/Erase Operation
The Memory button allows you to scroll through, print, or erase readings.
1. Press the Memory button. Spot Vital Signs LXi will display the
previous reading.
2. Press the Navigation buttons to select the desired function and press the Select
button. Follow instructions on the display.
705298 Rev. C
Save/Send Operation
1. Use the Navigation buttons to move the arrow to “Save/Next Reading” or
“Send/Next Reading” in the Navigation window.
2. Press the Select button. Spot Vital Signs LXi will transfer data electronically if it
can or will save data in memory if it cannot transfer it. A blank status window will
appear.
Manual Weight, Height, Respiration, Pain Entry
You may enter these parameters if they are enabled in the Internal Configuration
Mode; see Directions for Use manual for details.
1. Press the Navigation buttons to move the arrow in front of the desired parameter
in the Navigation window.
2. Press the Select button.
3. Press the Navigation buttons up to increase values or down to decrease values.
4. Press the Select button to accept the entry.
Memory/Print/Erase Operation
The Memory button allows you to scroll through, print, or erase readings.
1. Press the Memory button. Spot Vital Signs LXi will display the
previous reading.
2. Press the Navigation buttons to select the desired function and press the Select
button. Follow instructions on the display.
705298 Rev. C
Caution: Consult accompanying documents.
MEM
Caution: Consult accompanying documents.
MEM
Caution: Consult accompanying documents.
MEM
Caution: Consult accompanying documents.
MEM

Blood Pressure Operation
Press the BP Start/Stop button to start a blood pressure
measurement; press it again to stop a current reading.
SureTemp Plus Temperature Operation
1. Remove probe from well and apply a new probe cover. Use the
Navigation buttons to change the temperature mode then
press the Select button.
2. Place probe in contact with patient tissue as directed in the
Directions for Use manual. When done, a beep sounds. The temperature appears
on the display.
3. Eject probe cover. Return probe to well before starting another measurement.
Braun ThermoScan®PRO 4000 Temperature Operation
1. Remove probe from holder and apply a new probe cover; when ready, the device
will beep.
2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
3. Press the Activation button. When done, a long beep sounds. The probe will
display the temperature.
4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will
display the temperature.
SpO2Operation
Apply sensor to patient. Verify there is a signal on the pulse signal bar graph. The
SpO2measurement and pulse rate will update continuously for 10 minutes.
Blood Pressure Operation
Press the BP Start/Stop button to start a blood pressure
measurement; press it again to stop a current reading.
SureTemp Plus Temperature Operation
1. Remove probe from well and apply a new probe cover. Use the
Navigation buttons to change the temperature mode then
press the Select button.
2. Place probe in contact with patient tissue as directed in the
Directions for Use manual. When done, a beep sounds. The temperature appears
on the display.
3. Eject probe cover. Return probe to well before starting another measurement.
Braun ThermoScan®PRO 4000 Temperature Operation
1. Remove probe from holder and apply a new probe cover; when ready, the device
will beep.
2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
3. Press the Activation button. When done, a long beep sounds. The probe will
display the temperature.
4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will
display the temperature.
SpO2Operation
Apply sensor to patient. Verify there is a signal on the pulse signal bar graph. The
SpO2measurement and pulse rate will update continuously for 10 minutes.
Blood Pressure Operation
Press the BP Start/Stop button to start a blood pressure
measurement; press it again to stop a current reading.
SureTemp Plus Temperature Operation
1. Remove probe from well and apply a new probe cover. Use the
Navigation buttons to change the temperature mode then
press the Select button.
2. Place probe in contact with patient tissue as directed in the
Directions for Use manual. When done, a beep sounds. The temperature appears
on the display.
3. Eject probe cover. Return probe to well before starting another measurement.
Braun ThermoScan®PRO 4000 Temperature Operation
1. Remove probe from holder and apply a new probe cover; when ready, the device
will beep.
2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
3. Press the Activation button. When done, a long beep sounds. The probe will
display the temperature.
4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will
display the temperature.
SpO2Operation
Apply sensor to patient. Verify there is a signal on the pulse signal bar graph. The
SpO2measurement and pulse rate will update continuously for 10 minutes.
Blood Pressure Operation
Press the BP Start/Stop button to start a blood pressure
measurement; press it again to stop a current reading.
SureTemp Plus Temperature Operation
1. Remove probe from well and apply a new probe cover. Use the
Navigation buttons to change the temperature mode then
press the Select button.
2. Place probe in contact with patient tissue as directed in the
Directions for Use manual. When done, a beep sounds. The temperature appears
on the display.
3. Eject probe cover. Return probe to well before starting another measurement.
Braun ThermoScan®PRO 4000 Temperature Operation
1. Remove probe from holder and apply a new probe cover; when ready, the device
will beep.
2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
3. Press the Activation button. When done, a long beep sounds. The probe will
display the temperature.
4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will
display the temperature.
SpO2Operation
Apply sensor to patient. Verify there is a signal on the pulse signal bar graph. The
SpO2measurement and pulse rate will update continuously for 10 minutes.
Spot Vital Signs LXi
Operating Instructions
On/Off Button
Controls power to the device.
Select Button
Accepts the current option.
Spot Vital Signs LXi
Operating Instructions
On/Off Button
Controls power to the device.
Select Button
Accepts the current option.
Spot Vital Signs LXi
Operating Instructions
On/Off Button
Controls power to the device.
Select Button
Accepts the current option.
Spot Vital Signs LXi
Operating Instructions
On/Off Button
Controls power to the device.
Select Button
Accepts the current option.
Blood Pressure Operation
Press the BP Start/Stop button to start a blood pressure
measurement; press it again to stop a current reading.
SureTemp Plus Temperature Operation
1. Remove probe from well and apply a new probe cover. Use the
Navigation buttons to change the temperature mode then press
the Select button.
2. Place probe in contact with patient tissue as directed in the
Directions for Use manual. When done, a beep sounds. The temperature appears
on the display.
3. Eject probe cover. Return probe to well before starting another measurement.
Braun ThermoScan®PRO 4000 Temperature Operation
1. Remove probe from holder and apply a new probe cover; when ready, the device
will beep.
2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
3. Press the Activation button. When done, a long beep sounds. The probe will
display the temperature.
4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will
display the temperature.
SpO2Operation
Apply sensor to patient. Verify there is a signal on the pulse signal bar graph. The
SpO2measurement and pulse rate will update continuously for 10 minutes.
Blood Pressure Operation
Press the BP Start/Stop button to start a blood pressure
measurement; press it again to stop a current reading.
SureTemp Plus Temperature Operation
1. Remove probe from well and apply a new probe cover. Use the
Navigation buttons to change the temperature mode then press
the Select button.
2. Place probe in contact with patient tissue as directed in the
Directions for Use manual. When done, a beep sounds. The temperature appears
on the display.
3. Eject probe cover. Return probe to well before starting another measurement.
Braun ThermoScan®PRO 4000 Temperature Operation
1. Remove probe from holder and apply a new probe cover; when ready, the device
will beep.
2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
3. Press the Activation button. When done, a long beep sounds. The probe will
display the temperature.
4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will
display the temperature.
SpO2Operation
5. Apply sensor to patient. Verify there is a signal on the pulse signal bar graph. The
SpO2measurement and pulse rate will update continuously for 10 minutes.
Blood Pressure Operation
Press the BP Start/Stop button to start a blood pressure
measurement; press it again to stop a current reading.
SureTemp Plus Temperature Operation
1. Remove probe from well and apply a new probe cover. Use the
Navigation buttons to change the temperature mode then
press the Select button.
2. Place probe in contact with patient tissue as directed in the
Directions for Use manual. When done, a beep sounds. The temperature appears
on the display.
3. Eject probe cover. Return probe to well before starting another measurement.
Braun ThermoScan®PRO 4000 Temperature Operation
1. Remove probe from holder and apply a new probe cover; when ready, the device
will beep.
2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
3. Press the Activation button. When done, a long beep sounds. The probe will
display the temperature.
4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will
display the temperature.
SpO2Operation
Apply sensor to patient. Verify there is a signal on the pulse signal bar graph. The
SpO2measurement and pulse rate will update continuously for 10 minutes.
Blood Pressure Operation
Press the BP Start/Stop button to start a blood pressure
measurement; press it again to stop a current reading.
SureTemp Plus Temperature Operation
1. Remove probe from well and apply a new probe cover. Use the
Navigation buttons to change the temperature mode then
press the Select button.
2. Place probe in contact with patient tissue as directed in the
Directions for Use manual. When done, a beep sounds. The temperature appears
on the display.
3. Eject probe cover. Return probe to well before starting another measurement.
Braun ThermoScan®PRO 4000 Temperature Operation
1. Remove probe from holder and apply a new probe cover; when ready, the device
will beep.
2. Fit probe snugly in the ear canal as directed in the Directions for Use manual.
3. Press the Activation button. When done, a long beep sounds. The probe will
display the temperature.
4. Eject probe cover and return probe to the holder. The Spot Vital Signs LXi will
display the temperature.
SpO2Operation
Apply sensor to patient. Verify there is a signal on the pulse signal bar graph. The
SpO2measurement and pulse rate will update continuously for 10 minutes.
Spot Vital Signs LXi
Operating Instructions
On/Off Button
Controls power to the device.
Select Button
Accepts the current option.
Spot Vital Signs LXi
Operating Instructions
On/Off Button
Controls power to the device.
Select Button
Accepts the current option.
Spot Vital Signs LXi
Operating Instructions
On/Off Button
Controls power to the device.
Select Button
Accepts the current option.
Spot Vital Signs LXi
Operating Instructions
On/Off Button
Controls power to the device.
Select Button
Accepts the current option.