Wen WB2322 User manual

ADJUSTABLE
WORKBENCH
Model # WB2322
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If
you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
[email protected]
WENPRODUCTS.COM
(M-F 8AM-5PM CST)
bit.ly/wenvideo
For replacement parts visit
WENPRODUCTS.COM
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.

PRODUCT SPECIFICATIONS
WB2322
220 lbs (100 kg), Evenly Distributed
29-1/2 to 41-1/2 inches
(2 inch increments, 7 height levels)
23-5/8 x 11-3/4 to 19 inches
1/2 to 7-3/4 inches
0°, 25°, 50°, 80°
25-3/8 x 25-1/2 x 38-3/4 inches
27.5 lbs
TABLE OF CONTENTS
2
3
4
5
8
10
11
Product Specifications
Important Safety Rules
Unpacking & Parts List
Assembly
Adjustments
Maintenance
Warranty Statement
Model Number:
Maximum Loading Capacity:
Adjustable Height:
Table Dimensions:
Width Between Tables:
Table Tilting Angle:
Assembled Product Dimensions:
Product Net Weight:
2

Safety is a combination of common sense, staying alert and knowing how your item works.
SAVE THESE SAFETY INSTRUCTIONS.
WARNING: To avoid mistakes and serious injury, read and understand this entire instruction manual.
Learn the tool’s applications, limitations, and possible hazards. These safety rules cannot address every
possible scenario you may encounter, so please use common sense and caution when using the tool.
WORK AREA SAFETY
1. Keep your work area clean, uncluttered, and well lit. Cluttered areas invite injuries and accidents. Keep the
ground clear of tripping hazards. Do not work on floor surfaces that are slippery with sawdust or wax.
2. Observe work area conditions. Keep bystanders at a safe distance from the work area. Never allow children or
pets near the tool.
PERSONAL SAFETY
1. Wear ANSI Z87.1-approved safety goggles and work gloves. Do not wear loose clothing, neckties, or jewelry
and tie back long hair. Wear additional safety gear as required by local, state and federal regulations.
2. Stay alert - watch what you’re doing and use common sense when using the tool. Do not use while you are tired
or under the influence of drugs, alcohol or medication that may affect your ability to properly use the tool. A mo-
ment of inattention may result in serious personal injury.
3. Do not overreach. Keep proper footing and balance at all times.
WORK TABLE USE & CARE
1. Use the right tool for the job. Do not modify or use the tool to do a job for which it was not designed. Unau-
thorized modification may damage the tool and/or cause personal injuries.
2. Always check for damaged or worn out parts before using the work table. Check for alignment of moving parts,
jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation. Any part that
is damaged should be properly repaired or replaced before use.
3. For maximum stability, assemble and use the work table on a hard, flat and level surface.
4. Ensure all adjustments and connections are secure before operation.
5. Never stand or sit on the work table, or use it as a ladder.
6. Do not exceed the 220 lbs maximum weight capacity of the tool. Do not apply an unbalanced load that could
cause the unit to tip over. Be aware of dynamic loading, as sudden movement may briefly create excess load, caus-
ing product to fail.
7. Properly secure the workpiece with the onboard clamps or a vise, instead of your hand or foot.
8. Be careful when adjusting the stand. Keep fingers and hands clear to avoid getting them trapped.
9. Maintain tools properly. Always keep tools clean and in good working order. Store the tool in a dry, secure
place out of the reach of children. Inspect the tool for good working condition prior to storage and before re-use.
IMPORTANT SAFETY RULES
3

x 1
x 2
x 2
x 1
x 4x 2
x 3
x 4
x 1
x 12x 4
M6*35
x 4
M6*10
x 2
M6
M6*40
x 4
x 16 M6M6
UNPACKING & PARTS LIST
Carefully take out all the parts from the packaging. Check all components and compare against the diagram be-
low. Organize them for assembly. If any part is damaged or missing, please contact our customer service at (800)
232-1195, M-F 8-5 CST or email us at [email protected].
4
No. Part No. Description Qty.
1 WB2322-001 Table Top 1
2 WB2322-002 Side Support 2
3 WB2322-003 Wide Bracket 1
4 WB2322-004 Narrow Bracket 3
5 WB2322-005 Foot Bar 1
6 WB2322-006 Leg 2
7 WB2322-007 Angle Lock Knob 2
8 WB2322-008 Peg 4
No. Part No. Description Qty.
9 WB2322-009 Clamp 4
10 WB2322-010 Washer, M6 32
11 WB2322-011 Hex Nut, M6 16
12 WB2322-012 Lock Nut, M6 4
13 WB2322-013 Screw, M6*10 4
14 WB2322-014 Screw, M6*35 4
15 WB2322-015 Screw, M6*40 12
1
3 4 5 6
2
7
10
13
8
11
14
9
12
15
32

ASSEMBLY
1 2
3 4
5
WARNING: Read and understand all instructions. Failure to follow all warnings and instructions may
result in serious injury or property damage.

ASSEMBLY
x 2
8
7
x 2x 2
34
5 6
6

ASSEMBLY
x 2
x 2
9 10
11 12
7

ADJUSTMENTS
1
2
3
8

ADJUSTMENTS
1
3
2
0° 25° 50° 80°
9

ADJUSTMENTS
1
2
3
CLEANING AND STORAGE
After each use, clean the external surfaces with a clean cloth. Store the tool indoors in a safe, dry area away from
children. Inspect the tool for good working condition prior to storage and before re-use.
MAINTENANCE
PRODUCT DISPOSAL
The tool, accessories and packaging should be sorted for recycling instead of disposed of with household waste.
Please take them to your local recycling facility for responsible disposal and to minimize the environmental impact.
10

11
LIMITED TWO YEAR WARRANTY
WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this
commitment and our dedication to quality.
LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE
GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN con-
sumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of
purchase. Ninety days for all WEN products, if the tool is used for professional use.
SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and,
to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of
parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly
handled, or misrepaired by persons other than Seller or Authorized Service Center. To make a claim under this
Limited Warranty, you must make sure to keep a copy of your proof of purchase that clearly defines the Date of
Purchase (month and year) and the Place of Purchase. Place of purchase must be a direct vendor of Great Lakes
Technologies, LLC. Third party vendors such as garage sales, pawn shops, resale shops, or any other secondhand
merchant void the warranty included with this product. Contact [email protected] or 1-800-232-1195
to make arrangements for repairs and transportation.
When returning a product for warranty service, the shipping charges must be prepaid by the purchaser. The prod-
uct must be shipped in its original container (or an equivalent), properly packed to withstand the hazards of ship-
ment. The product must be fully insured with a copy of the warranty card and/or the proof of purchase enclosed.
There must also be a description of the problem in order to help our repairs department diagnose and fix the issue.
Repairs will be made and the product will be returned and shipped back to the purchaser at no charge.
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS THAT WEAR OUT FROM
REGULAR USAGE OVER TIME INCLUDING BELTS, BRUSHES, BLADES, ETC.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1) YEAR FROM DATE
OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN PROVINCES DO NOT ALLOW LIM-
ITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAM-
AGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM
THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROV-
INCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., PROVINCE TO PROVINCE
IN CANADA AND FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY APPLIES ONLY TO PORTABLE ELECTRIC TOOLS, BENCH POWER
TOOLS, OUTDOOR POWER EQUIPMENT AND PNEUMATIC TOOLS SOLD WITHIN THE UNIT-
ED STATES OF AMERICA, CANADA AND THE COMMONWEALTH OF PUERTO RICO. FOR WAR-
RANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT THE WEN CUSTOMER SUPPORT
LINE.

THANKS FOR
REMEMBERING