West Elm BENTWOOD OFFICE CHAIR User manual

BENTWOOD OFFICE CHAIR

PLEASE ENSURE TO HAVE THE MODEL
FROM THE PACKAGING OR INSTRUCTION BOOKLET
TO RETURN THE PRODUCT:
PLEASE CONTACT THE RETAILER
WHERE THE ITEM WAS PURCHASED FROM
FOR REPLACEMENT PARTS OR HELP WITH
ASSEMBLY PLEASE CONTACT US

IMPORTANT: Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by children
and pets. Keep children and pets away during assembly. To avoid danger of
suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. We do not recommend the use of power tools for assembly as this
could damage the unit. Only use manual tools.
Requires 2 people for ease of assembly.
SAFETY INFORMATION
CARE and MAINTENANCE
Wipe regularly with clean water and a damp, clean, soft white cloth.
General cleaning can be done as needed with a mild detergent and water
solution. Always rinse with clean water and dry.
For heavy soiling, dampen a soft white cloth or soft bristle brush. Use care as
scrubbing can damage the surface.
More difficult stains can be treated, but this should be occasional, not daily,
cleaning. ANY cleaning solution used must be removed with clean water and a
clean white cloth. Cleaning residue left on the material can cause it to dry out
and crack, or affect the color.
DO NOT use any cleaners with corrosive ingredients (lye, acids or ammonia).

PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
2
1
BACK
QTY 1
3
SEAT
QTY 1
CONNECTOR
QTY 1
5
4
GAS LIFT
QTY 1
6
BASE
QTY 1
MECHANISM
QTY 1
7
CASTER WHEELS
QTY 5
NEED HELP? For help with assembly or if you are missing a part, Please call customer
service

PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
ALLEN KEY SCREW
M6 X 25 mm
QTY 8
C
B
A
ALLEN KEY SCREW
M6 X20 mm
QTY 4
ALLEN KEY
QTY 1
NEED HELP? For help with assembly or if you are missing a part, Please call customer
service

ASSEMBLY
STEP 1
Align the holes on the Connector (3) with the Seat (2) and Back (1).
Insert Allen Key Screws (A) through the Connector (3) to the Seat (2)
and Back (1) and tighten.

ASSEMBLY
STEP 2
Align the holes on the Mechanism (6) to the Seat (2).
Insert Allen Key Screws (B) into pre-drilled holes and tighten.

ASSEMBLY
STEP 3
Insert the Castor Wheels (7) to the Base (5).
Remove the plastic cap from the Gas Lift (4) and place the Gas Lift (4)
in the middle of the Base (5).

ASSEMBLY
STEP 4
Place the assembled seat on the Gas Lift (4).
Please note the hole of the Mechanism (6) should aim to the
top of the Gas Lift (4).

ASSEMBLY
Press the lever on the Mechanism (6) to raise the seat up or down.
STEP 5

We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes. Any
warranty is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair by other than an authorized agent.
Heavy-duty or daily professional/commercial usage are not guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.
WARRANTY
Thank you for purchasing our product. These products have been made
to demanding, high-quality standards and are guaranteed for domestic
use against manufacturing faults for a period of 12 months from the
date of purchase. This warranty does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line or by email us.