West Elm hicks dining table 80x40 User manual

hicks dining table 80x40
assembly instructions
Page 1 of 59268855—04/07 
D
allen key 1x
levelers 4x
A B
bolt 16x
C
rubber bumper 7x

hicks dining table 80x40
assembly instructions
Page 2 of 59268855—04/07
1. Insert bolt (A) through predrilled hole in bracket and into predrilled hole in leg panel as shown. Tighten using allen key (D).
D
A

hicks dining table 80x40
assembly instructions
Page 3 of 59268855—04/07 
 2. Insert leveler (B) into predrilled hole in bottom of leg as shown. If neccessary, adjust by hand when leveling table on
floor after completed table assembly.
B

hicks dining table 80x40
assembly instructions
Page 4 of 59268855—04/07
3. Insert brackets on legs into openings in center panel as shown. Insert bolt (A) into pre-dilled holes on bottom faces of center
panel as shown. Tighten using allen key (D).
AD

CARE INSTRUCTION
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners
hicks dining table 80x40
assembly instructions
Page 5 of 59268855—04/07 
 4. Insert rubber bumpers (C) into predrilled holes in top of center panel and legs as shown. Carefully set table top into place.
PLEASE NOTE: GLASS TOP AND METAL FRAME ARE PACKED IN SEPERATE CARTONS
C