Westerbeke 8 BCDT-614 User manual

Standard Features
■Water-cooled AC electrical generator
■Fiberglass sound enclosure
■Remote control panel with 32.8ft (10 m) plug-in cable
■LED electrical load indicator on panel
■ One touch start/stop control system
■ Low oil pressure shutdown with indicating light
■High temperature shutdown with indicating light
■Battery charge circuit failure indicating light
■12 Volt DC isolated ground electrical system
■Double anti-vibration mounting system
■Engine oil cooler
■Gear driven raw water pump with neoprene impeller
■Engine air cooler and intake silencer
■Engine hour meter
■“CE” mark
■U.S. EPA and CARB certified exhaust emissions
■Operators’ and parts manual
WESTERBEKE
8BCDT60Hz
7BCDT50Hz
WESTERBEKE
WESTERBEKE
Engines & Generators
W
TMTM
8BCDT Marine Diesel Generator
DIESEL
GENERATOR
DIESEL GENERATOR 8BCDT60Hz
7BCDT50Hz
8BCDT Marine Diesel Generator
Sound Guard Dimensions
Length 28.3” (717.6 mm)
Width 19.0” (482.6 mm)
Height 23.8” (605.3 mm)
Weight 85 lbs. (38.6 Kilos)
Standard 8BCDT Sound Guard
W
Mark
“C e ”
8 kilowatts, absolutely compact, absolutely quiet...
Compact for Tight Installations
The new 8BCDT is powered by a compact, two-cylin-
der diesel engine and is designed for optimum
performance where space is limited.
Its compact
design allows it to be installed in spaces most
generators can’t fit!
Designed for Quiet Running
The engine is designed with indirect injection for qui-
eter engine operation. The sound enclosure is con-
structed of fiberglass lined with high-density acoustic
insulation for optimum sound reduction. A double
mounting system, engineered for maximum vibration
isolation, is incorporated in the sound enclosure.
Water Cooled AC Generator
The AC generator is enclosed in a water-cooled
stainless steel jacket. This allows the 8BCDT greater
sound deadening since large openings in the sound
shield are not required for air-cooling. The water-
cooled jacket is oversized which eliminates block-
ages and provides a maximum flow of cooling water
around the generator. The water jacket also cools the
air going through the rotor of the generator, the
engine combustion air and the unit-mounted controls
for the engine and generator.
User Friendly Remote Control Panel
The standard plug-in remote control panel is
designed to be user friendly and provides the opera-
tor with all the necessary information and controls to
use the generator. The panel includes one-touch
start/stop controls, automatic shutoffs with indicating
lights for low oil pressure and high engine tempera-
ture, a battery charge indicator light and an AC load
indicator.
Environmentally Clean Engine
Meets all EPA and CARB emissions standards. The
environmentally friendly engine is also equipped with
an oil cooler that insures proper engine lubrication
and cooling in installations with high ambient air and
cooling water temperatures.

4.20196523
WESTERBEKWESTERBEKEE
Engines & Generators
WW
TM
Number of cylinders 2 Cylinder vertical in-line
Type 4 cycle
Displacement 38.75 cu. in. (0.635 liter)
Bore and stroke 2.99” x 2.76” (76 mm x 70 mm)
Compression ratio 23:1
Rated rpm 60 Hz - 3600 rpm
50 Hz - 3000 rpm
HP @ 3600/3000 rpm 15.2/13.5
Maximum angle of operation 25˚ Continuous, 30˚ Intermittent
Exhaust elbow connection 2.0” OD (50.8mm)
Raw water connection .75” OD (19.1mm)
Dry weight (Including Soundguard) 408 lbs. (185.1 kilos)
Combustion system Swirl type
Aspiration Naturally aspirated
Lubrication system Forced lubrication by gear pump
Dimensions
Cylinder head Cast Iron
Cylinder block Cast Iron
Crankshaft Forged crankshaft, three main bearings
Valves Overhead, rotating type
Fuel System Self-bleeding
Intake system Tuned intake silencer for maximum noise reduction
Cooling system Fresh water-cooled with shell and tube type heat exch.
Exhaust manifold Cast aluminum, fresh water-cooled
Hydro-hush muffler
“A” on board spare parts kit; “B” extended cruising spare parts kit
Anti-siphon valve for overboard cooling discharge water
Technical manual
DPS 3M 10/01
Generator Design
DESIGN: Brushless, two pole, revolving field. TEMPERATURE RISE: Within NEMA MG1-22.40 definition when
VOLTAGE REGULATION: Standard +/- 6% no load to full load. operating at full load.
FREQUENCY REGULATION: 3 Hz (5%) no load to full load. COOLING: Water cooled.
INSULATION: Class “H”, as defined by NEMA MG1-1.65. ELECTROMAGNETIC INTERFERENCE LEVEL: Meets EMC
directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC
Electrical Characteristics Ratings Engine
Model Volts Amps Hertz Phase Wire Power Factor KW RPM Start
8 BCDT-614 120 66.7 60 1 4 1.0 8 3600 Remote
Generator field adjustable to 50 or 60 Hz.
7 BCDT-514 230 30.4 50 1 4 1.0 7 3000 Remote
Coolant capacity 2.1 qts. (1.91 liters) approx.
Full load fuel consumption 1.08 GPH (4.09LPH) @ 3600 rpm
Governor Centrifugal type
Injectors Throttle type
Fuel transfer pump 12 Volt DC electric type
Lube oil filter Full flow, spin-on element
Fuel supply and return piping 1/4” ID (6.35 mm) minimum
Starting motor 12 volt, solenoid actuated
Battery charger 17 ampere (12 Volts)
Cold cranking amps 172 amps @ 80 degrees F
Fuel Filter Secondary, replaceable type
Starting aid 12 volt sheathed type glow plug
Fuel injection pump Bosch type
3/8” ID (9.53 mm) maximum
Inches (millimeters)
8BCDT60Hz
7BCDT50Hz
Lubricant capacity 3.1 quarts (2.9 liters)
Electrical system 12 volts DC, negative ground
0.87 GPH (3.29 LPH) @ 3000 rpm
Westerbeke Corp., Myles Standish Industrial Park, 150 John Hancock Road, Taunton, MA02780-7319, U.S.A. • TELEPHONE : [phone] •FAX: [phone] •Website: www.westerbeke.com
Specifications Subject to Change without Notice.
Optional Equipment
Construction – Engine Components
Specifications