Westin 27-74715 User manual

1
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-2774715-RevA ECO #: W18-0175 DATE: 03/12/19
INSTALLATION INSTRUCTIONS
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
1,2 2RUNNING BOARD ASSEMBLY, DRIVER (1) AND PASSENGER (2) 13MM SOCKET
36* ADAPTER BRACKET 4MM HEX KEY
46* PLATE A RATCHET
56PLATE B TORQUE WRENCH
64M8 SET SCREW (BLACK ZINC)
716 M8 SPLIT LOCK WASHER (YELLOW ZINC)
816 M8 HEX NUT (YELLOW ZINC)
*INCLUDED IN RUNNING BOARD ASSEMBLIES
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING
CONTENT
Grate Steps Running Board
PART NUMBER:
27-74715 (68” Running Board)
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
ITEM 1
Passenger Side Opposite
ITEM 3 ITEM 4 ITEM 5
PLATE A PLATE B
ADAPTER
BRACKET

2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-2774715-RevA ECO #: W18-0175 DATE: 03/12/19
2. Install brackets according the instructions included with the mount kit (sold separately).
3. Place the Running Board Assemblies (items 1 & 2) on top of the Mount Brackets and adjust Adapter Brackets so that the
M8 Set Screws align with the Mount Bracket slots. See Figure 1.
Fig. 1

3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-2774715-RevA ECO #: W18-0175 DATE: 03/12/19
4. Adjust the Running Board Assemblies (item 1 & 2) along the length of the vehicle.
5. For each Adapter Bracket (item 3), lift the Running Board Assembly and place a Plate B (item 5) between the Adapter
Bracket and the Mount Bracket. See Figure 2.
6. Tighten the M8 Set Screws (item 6) until the Adapter Bracket begins to bend.
Note: Do not overtighten the M8 Set Screws. This may damage the Adapter Brackets. The separation between the Adapter
Bracket and Plate B should be no more than 1/16” of an inch.
7. For each Adapter Bracket/Mount Bracket pair, use (2) M8 or 5/16” Flat Washers (included with mount kit), (2) M8 Hex
Nuts (item 8), and (2) M8 Split Lock Washers (item 7) to secure the Adapter Brackets (item 3) to the Mount Brackets. See
Figure 2.
8. Tighten all M8 hardware to 15-18 ft-lbs.
PLATE A
Fig. 2
 Adjust Running Boards
 Place Plate B’s
 Tighten Set Screws
 Install remaining hardware
ADAPTER
BRACKET
PLATE B

4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-2774715-RevA ECO #: W18-0175 DATE: 03/12/19
CARE INSTRUCTIONS
 REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
 STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
 GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER
INSTALLATION COMPLETE

5
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service [phone]
www.westinautomotive.com
P.N.: 75-2774715-RevA ECO #: W18-0175 DATE: 03/12/19
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
WARNING
Failure to follow these instructions could lead to death, personal injury, and / or property damage.
FASTENERS:
All Westin supplied fasteners must be utilized and installed in accordance with the installation in-
structions and apply torque to the specifications as defined. DOUBLE CHECK ALL FASTENERS
BEFORE INITIAL USE, AND PERIODICALLY IN THE FUTURE TO ENSURE PROPER FUNCTION
AND SAFETY.
DRILLING:
Most Westin products do not require drilling for installation. If drilling is defined as required, use
caution when drilling a vehicle. FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN
PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
EYE PROTECTION:
ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO
AVOID PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY: (if applicable)
The Westin Receiver Hitches will have a visible tow rating label affixed directly on the product.
User should never exceed the vehicle manufacturers maximum tow and weight rating regardless
of the capacity of the hitch. FAILURE TO FOLLOW THESE GUIDELINES WILL VOID THE WESTIN
WARRANTY AND MAY RESULT IN PERSONAL INJURY AND/OR INJURY TO OTHERS AS WELL
AS VEHICLE DAMAGE.
FOR CALIFORNIA RESIDENTS ONLY-PROP 65 WARNING:
Some products may contain chemicals such as DEHP, which can cause cancer, birth defects or
other reproductive harm. For more info go to www.p65warnings.ca.gov