Westin 25-2130 User manual

STEP1. Removethecontentsfromtheboxandcheckforanydamage.Verifyallpartsagainstthepartslist.
STEP2. Readandunderstandinstructionscompletelybeforebeginninginstallation.
STEP3.Install mount brackets to vehicle body using (2) M8-1.25 x 30MM hex head bolts, (2) M8 split lock washers and
(2)M8flatwashers. Leaveloose.
STEP4. Fasten mount brace to vehicle body using (1)M8-1.25 x 30MM hex head bolt, (1) M8 split lock washer and (1)
M8flatwasher. Attachotherendofmountbracetomountbracketusing(1)M8-1.25x30MMhexheadbolt,(2)
M8flatwashers,(1)M8splitlockwasherand(1)M8-1.25hexnut. Leaveloose.
STEP5. Positionstepbarinplaceandfastentomountbracketsusing(4)3/8-16x1.00”buttonheadcapscrews and (4)
3/8”internaltoothlockwashers. Leaveloose.
STEP6. Levelandadjuststepbarasdesired. Torque8MMhardwareto25FT.LBS.and3/8”hardwareto30FT.LBS.
1STEP BAR, DRIVER SIDE 13MM SOCKET
4MOUNT BRACKET 7/32” HEX WRENCH (ALLEN)
4MOUNT BRACE RATCHET
4M8-1.25 HEX NUT TORQUE WRENCH
16 M8 SPLIT LOCK WASHER
20 M8 FLAT WASHER
16 M8-1.25 X 30MM HEX HEAD BOLT NOTE: FASTENERS ARE CONTAINED
83/8-16 X 1.00” BUTTON HEAD CAP SCREW IN BOLT KIT 60-1214.
83/8” INTERNAL TOOTH LOCK WASHER
PARTS KIT CONTENTS TOOLS REQUIRED
QTY DESCRIPTION
1STEP BAR, PASSENGER SIDE 13MM WRENCH
75-0313 Revision A 05/16/02
INSTALLATION INSTRUCTIONS
APPLICATION: 2002-UP CHEVROLET TRAILBLAZER
2002-UP GMC ENVOY
2002-UP OLDSMOBILE BRAVADA
2002-UP CHEVROLET TRAILBLAZER EXT
2002-UP GMC ENVOY XL
STEP BAR
ASSEMBLIES
25-2130
25-2135
26-2130
26-2135
25-2240
25-2245
26-2240
26-2245

Finish protection - Westin products have a high quality finish that must be cared for like any
other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax
(pure carnauba, for example) on a regular basis. The use of cleaner wax or any compound which
contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
Thank You for choosing Westin products
For additional installation assistance please call
Customer service [phone] or [phone]
Westin Automotive Products, Inc.
5200 N. Irwindale Ave. Suite 220
Irwindale, Ca. 91706
3/8” INTERNAL TOOTH LOCK WASHER
3/8” BUTTON HEAD CAP SCREW
M8-1.25 X 30MM HEX HEAD BOLT
M8 SPLIT LOCK WASHER
M8 FLAT WASHER
M8-1.25 X 30MM HEX HEAD BOLT
M8 SPLIT LOCK WASHER
M8 FLAT WASHER
M8-1.25 X 30MM HEX HEAD BOLT
(2) M8 FLAT WASHERS
M8 SPLIT LOCK WASHER
M8-1.25 HEX NUT
MOUNT BRACKET
MOUNT
BRACE
FRONT
DRIVER SIDE, FRONT INSTALLATION SHOWN