Whistler WIC-2409C User manual

The Whistler Group Corporate Headquarters
3604 NW Frontage Rd. • Bentonville, AR 72712
Tel [phone] • Fax [phone]
Customer Return Center
551 N. 13th St. • Rogers, AR 72756
Customer Service Tel [phone]
Please read this User Manual carefully before using the product!
www.whistlergroup.com
Version No.: 1.0
Model No.: WIC-2409C
Wireless Inspection Camera
with Color LCD Monitor

WELCOME
PACKING LIST
COMPONENT / CONTROLS
INSTALLATION
MONITOR POWER CONNECTION
GENERAL SAFETY INFORMATION
OPERATION
SPECIFICATIONS
CAUTION
WARRANTY
ACCESSORIES
FCC INFORMATION
1
2
3
4-6
6
7
7-8
9
10
11
12
Back Cover

Thank you for choosing our wireless inspection camera. Please read the
user manual carefully before using this product. This product is designed
as a remote inspection device. It can be used to look into tight spots and
wirelessly transmit real-time video to the monitor. Typical applications
include HVAC, automotive inspection, cable routing, etc.
If you have questions concerning the operation of this Whistler product,
please call:
Please keep the receipt in a safe place.You may register your product online at
www.whistlergroup.com. For warranty verification purposes, a copy of your dated
store receipt must accompany any unit sent in for warranty work. If the unit
is returned without a dated store receipt, an out of warranty service charge
applies. Note: Your warranty period begins at the time of purchase. The
warranty is validated only by dated store receipt! Please record the serial
numbers (located on the back of the monitor and inside the grip’s battery
compartment door) in the space provided in the warranty section of the manual.
Enjoy your Whistler Inspection Camera.
Sincerely,
The Whistler Group, Inc.
Customer Service
1-800-531-0004
Monday - Friday • 8:00 am - 5:00 pm CT
or visit our website:
www.whistlergroup.com

- 2 -
9mm Camera with
3 ft. tube
Power AdapterAdapter Cable
Magnet Accessory
Clip
Hook Accessory
Clip
Mirror Accessory
Clip
Handheld Grip 2.4 in. LCD Monitor
Accessory Collar

COMPONENTS / CONTROLS
- 3 -

3. Reinstall battery compartment, cover, and screw.
- 4 -
Finger tighten
the knurled knob

The three included accessories (mirror, hook, and magnet) all attach
to the camera (image head) in the same manner. Slide the accessory
through the plastic holder, aligning it with the notch in holder.
Engage the “hook” on the accessory end with hole in the camera head.
Slide the plastic holder onto the camera head until it clicks to lock.
Align monitor slot with connector on grip and slide monitor downward
for proper engagement.
Align the slot
and connector
properly.
Make sure metal
tab engages
properly.
- 5 -
Notch
Image head
Accessory
Plastic Holder
Hole
Slide Plastic Holder
onto image head
Accessory Installed

Plug the adapter cable into the power socket on the monitor, plug the
other end of the adapter cable into the end of the power adapter. Plug
the power adapter into a 110v AC outlet.
- 6 -
The built-in Li-battery will charge after the adapter is plugged in.
The red indicator light will illuminate during charging and will turn off
after charging is complete.
The monitor can be used while charging.

Rotate the ON/OFF switch to turn on the camera. The power indicator
on top of the grip will illuminate. The intensity of the LEDs that surround
the camera on the imager head can be adjusted by rotating the switch.
- 7 -
Do not immerse the grip and monitor in water. Store in a dry place.
Such measures reduce the risk of electric shock and damage.
The imager head and cable are water resistant when the unit is fully
assembled, but the grip and monitor are not.

The flexible tube can be bent to accommodate exploration in a
variety of locations.
The accessories can be
used to retrieve small items
such as screws or rings.
Gently guide the tube into the desired location. Slight adjustments can
be made while maneuvering the head in a forward direction.
The switch acts
as a dimmer.
- 8 -
Slide the ON/OFF switch to the ON position. The power indicator will
illuminate green and a picture will appear on the monitor when the handheld
unit is turned on. Adjust the brightness, contrast, and orientation. Adjust the
camera LED intensity for a better image.