WiebeTech Ditto x86 SE User manual

Ditto x86 SE
QUICK START GUIDE
What's Inside:
1x Ditto x86 SE Imager
1x USB Type-C Hub
1x USB Type-A Adapter
1x USB Type-C Cable
1x USB Type-C to Type-A Cable
1x Ethernet Cable
1x Carrying Case

A6-3173-00-1 Rev. 1.1
1000 SE Tech Center Dr. Suite 160
Vancouver, WA 98683

USING THE DITTO X86 SE
Ditto x86 is the most portable way to capture evidence from sus-
pect computers in a forensically sound way.
The Ditto x86 can be operated using either a GUI called KIOSK
Mode or without one, which mimics the front panel on the larger
Ditto and Ditto DX Forensic Fieldstation models.
You can store the evidence you collect on the Ditto x86 SE's 2TB
of built-in storage.
You will need:
• Ditto x86 SE
• USB cable (with at least one end being USB Type-C)
How to use the Ditto x86:
1. Insert a USB cable into the Ditto x86 and plug the other end
of the cable into the target computer while it is powered off.
Use the included hub and adapter accessories if necessary.
2. Power the target computer on. The computer will boot from
the Ditto x86 and display a boot menu. If it does not, reset
the computer, load into the BIOS, and change the comput-
er’s boot order so that it boots to USB devices first. You will
also have to disable the computer's Secure Boot feature if it
is enabled. Refer to the motherboard’s documentation if nec-
essary.
3. Choose the boot option of your choice. Choose Ditto x86 -
Kiosk to load into the graphical user interface (GUI). Choose
Ditto x86 SE Quick Start Guide 3

Ditto x86 - Kiosk Non-persistent if you want to run the Dit-
to x86 with a GUI in RAM memory only. Choose Ditto x86 to
load the non-graphical text-based user interface. Choose
Power Off to power off the Ditto x86 and the computer.
TIP
The "Kiosk Non-persistent" boot option will pre-
vent settings and investigator information from
being written to the Ditto x86. Use this mode if
you need to maintain operational security.
4. Log into the user interface. The default username is admin
and the default password is admin.
5. Begin collecting evidence. You can store the evidence you
collect on the Ditto x86 SE's 2TB of built-in storage, which is
available as a destination in the Ditto interface.
NOTE
Please refer to the Ditto User Interface Manual
located at cru-inc.com/ditto for information on
how to operate both the GUI and text-based in-
terface.
6. Remove the Ditto x86 from the target computer and connect
it to your PC to retrieve your evidence.
4 Ditto x86 SE Quick Start Guide

SAFETY INFORMATION
Please read the following before handling this product.
1. Do not drop the product, submit it to impact, or pierce it.
2. The circuit boards within this product are susceptible to static
electricity. Proper grounding is strongly recommended to pre-
vent electrical damage to the product or other connected de-
vices, including the computer host.
3. Avoid placing this product close to magnetic devices, high
voltage devices, or in an area exposed to heat, flame, direct
sunlight, dampness, moisture, rain, vibration, shock, dust, or
sand.
4. A damaged cable or device may malfunction and/or overheat
and become a fire hazard.
SPECIFICATIONS
Product Name Ditto x86 SE
Color Black
Interface Types &
Speeds USB 3.2 Gen 2: up to 1000 MB/s
Data Connectors One (1) USB Type-C connector
Weight 45g
Ditto x86 SE Quick Start Guide 5

Dimension Width: 28 mm
Length: 69 mm
Height: 12 mm
Compliance EMI Standard: FCC Part 15 Class
B
EMC Standard: EN55024,
EN55032
CE, RoHS
NOTICES
©2020 CRU Data Security Group, LLC. ALL RIGHTS RE-
SERVED. WiebeTech®and Ditto®(collectively, the “Trademarks”)
are trademarks owned by CDSG and are protected under trade-
mark law. Nmap is a registered trademark of Insecure.com, LLC
in the United States and/or other countries. Excel is a registered
trademark of Microsoft in the United States and/or other coun-
tries. EnCase is a registered trademark of Guidance Software in
the United States and/or other countries. This document does not
grant any user of this product any right to use any of the Trade-
marks.
This Ditto x86 product and documentation are provided on a RE-
STRICTED basis. Use, duplication, or disclosure by the US Gov-
ernment is subject to restrictions set forth in Paragraph (b) of the
Commercial Computer Software License clause at 48 CFR
42.227-19, as applicable.
Product Warranty: CDSG warrants this product to be free of sig-
nificant defects in material and workmanship for a period of three
6 Ditto x86 SE Quick Start Guide

(3) years from the original date of purchase. CDSG’s warranty is
nontransferable and is limited to the original purchaser. Nmap is
a registered trademark of Insecure.com, LLC in the United States
and/or other countries. Excel is a registered trademark of Micro-
soft in the United States and/or other countries. EnCase is a reg-
istered trademark of Guidance Software in the United States
and/or other countries. This document does not grant any user of
this product any right to use any of the Trademarks.
Limitation of Liability: The warranties set forth in this agree-
ment replace all other warranties. CDSG expressly disclaims all
other warranties, including but not limited to, the implied warran-
ties of merchantability and fitness for a particular purpose and
non-infringement of third-party rights with respect to the docu-
mentation and hardware. No CDSG dealer, agent, or employee is
authorized to make any modification, extension, or addition to this
warranty. In no event will CDSG or its suppliers be liable for any
costs of procurement of substitute products or services, lost prof-
its, loss of information or data, computer malfunction, or any oth-
er special, indirect, consequential, or incidental damages arising
in any way out of the sale of, use of, or inability to use any CDSG
product or service, even if CDSG has been advised of the possi-
bility of such damages. In no case shall CDSG’s liability exceed
the actual money paid for the products at issue. CDSG reserves
the right to make modifications and additions to this product with-
out notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15
of the FCC rules. Operation is subject to the following two condi-
tions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including inter-
ference that may cause undesired operation.”
Ditto x86 SE Quick Start Guide 7

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference when the equipment is operated
in a home or commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
In the event that you experience Radio Frequency Interference,
you should take the following steps to resolve the problem:
1. Ensure that the case of your attached drive is grounded.
2. Use a data cable with RFI reducing ferrites on each end.
3. Use a power supply with an RFI reducing ferrite approximate-
ly 5 inches from the DC plug.
4. Reorient or relocate the receiving antenna.
8 Ditto x86 SE Quick Start Guide