Winmate W04FA3S-EHT1 User manual

Please read these instructions carefully before using this product, and save this manual for future use
E-Series HMI
Ubuntu 16.04
W04FA3S-EHT1
W07FA3S-EHT1
W10FA3S-EHH2
W15FA3S-EHA2
Quick Start Guide
V1.0
For more information on this
and other Winmate products,
please visit our website at:
www.winmate.com
Document part number: 9152111I102O

- 2 -
CONTENTS
INTRODUCTION ...........................................................................- 8 -
Features - 8 -
Package Contents - 9 -
Product Overview - 10 -
GETTING STARTED...................................................................- 14 -
Turning On Your Device - 14 -
Connecting to Other Devices - 15 -
Turning Off Your Device - 19 -
OPERATING THE DEVICE.........................................................- 20 -
Start Menu - 20 -
Linux Terminal - 21 -
System Information - 22 -
Brightness Adjustment - 23 -
Ethernet Settings - 24 -
Changing Serial Port Settings - 27 -
Exit the System - 28 -
INSTALLATION ..........................................................................- 29 -
Wiring Requirements - 29 -
Mounting Solution - 30 -
SPECIFICATIONS.......................................................................- 32 -
Hardware Specifications - 32 -
APPENDIX ..................................................................................- 34 -
Appendix A: Cleaning the Monitor - 34 -
Appendix B: Winmate Software Development Kit - 35 -
Appendix C: Ubuntu Command Code - 36 -

- 3 -
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two
conditions:
This device may not cause harmful
interference.
This device must accept any interference
received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for a class "B" digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at him
own expense.

- 4 -
European Union
Electromagnetic Compatibility Directive
(2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/
A2:2013
This equipment is in conformity with the requirement of the
following EU legislations and harmonized standards. Product also
complies with the Council directions.

- 5 -
Copyright Notice
No part of this document may be reproduced, copied, translated, or
transmitted in any form or by any means, electronic or mechanical,
for any purpose, without the prior written permission of the original
manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks
of their respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to
any product, including circuits and/or software described or
contained in this manual in order to improve design and/or
performance. We assume no responsibility or liability for the use of
the described product(s) conveys no license or title under any patent,
copyright, or masks work rights to these products, and make no
representations or warranties that these products are free from
patent, copyright, or mask work right infringement, unless otherwise
specified. Applications that are described in this manual are for
illustration purposes only. We make no representation or guarantee
that such application will be suitable for the specified use without
further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be
free from material and workmanship defects for a period of one year
from the invoice date. If the customer discovers a defect, we will, at
his/her option, repair or replace the defective product at no charge to
the customer, provide it is returned during the warranty period of one
year, with transportation charges prepaid. The returned product must
be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by
over 30 days, the in-warranty service will be made according to the
shipping date. In the serial numbers the third and fourth two digits
give the year of manufacture, and the fifth digit means the month (e.
g., with A for October, B for November and C for December).
For example, the serial number 1W16Axxxxxxxx means October of
year 2016.

- 6 -
Customer Service
We provide a service guide for any problem by the following steps:
First, visit the website of our distributor to find the update information
about the product. Second, contact with your distributor, sales
representative, or our customer service center for technical support if
you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers
every business day. We are always ready to give advice on
application requirements or specific information on the installation and
operation of any of our products.

- 7 -
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden
power surges. Only experienced electronics personnel
should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis
lorsque vous travaillez sur celui-ci. Ne pas brancher de
connections lorsque l’alimentation est présente. Des
composantes électroniques sensibles peuvent être
endommagées par des sauts d’alimentation. Seulement
du personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge
before touching the CPU card. Modern electronic devices
are very sensitive to static electric charges. As a safety
precaution, use a grounding wrist strap at all times. Place
all electronic components in a static-dissipative surface
or static-shielded bag when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute
charge statique avant de toucher la carte CPU. Les
équipements électroniques moderns sont très sensibles
aux décharges d’électricité statique. Toujours utiliser un
bracelet de mise à la terre comme précaution. Placer
toutes les composantes électroniques sur une surface
conçue pour dissiper les charge, ou dans un sac anti-
statique lorsqu’elles ne sont pas dans le chassis.

- 8 -
INTRODUCTION
Congratulations on purchasing Winmate® E-Series HMI. Winmate®
continues developing new generation of Human Machine Interfaces
for Industry 4.0 and Internet of Things (IoT). Our E-Series HMI runs
on Ubuntu operating system that allows installing the latest
applications (APPs). Thereby wide customization possibilities are
available to satisfy the needs of industrial automation.
There is one USB 2.0 onboard to connect mouse or keyboard, USB
OTG for system updates and micro SD card for data logging,
backup or data storage. System memory of 1 GB ensures stable
operation of applications.
With mounting clips for panel mounting there is no need to drill
holes in a fixture. This saves you the time for mounting and
guarantee aesthetic look of the wall after the unit gets removed.
Features
Winmate® E-Series HMI features:
Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz
Projected Capacitive (P-CAP) Multi-Touch
Fanless cooling system and Ultra-low power consumption
Front IP65 water and dust proof, rear IP22
Power over Ethernet (Data and Power in a single cable)
Mounting clips for quick Installation
Elegant design for room booking, access control and room
information applications
Ubuntu 16.04 OS

- 9 -
Package Contents
Carefully remove the box and unpack your device. Please check if
all the items listed below are inside your package. If any of these
items are missing or damaged contact us immediately.
Standard factory shipment list:
HMI Device
Quick Start
Guide
(Hardcopy)
User Manual
& Driver CD
USB to Micro
USB Cable
Varies by product
specifications
Varies by product
specifications
Varies by product
specifications
9487049050K0
AC Adapter
(12V/ 50W)
Power Cord
2 pin
Terminal
Block
Mini USB to
UART Cable
(For Linux use)
922D050W12A
Varies by country
94J602G020K0
94E7053090K0
Mounting
Clips and
Screws
82111E240400
*Package content may vary based on your order.

- 10 -
Product Overview
E-Series HMI 4.3”
Unit: mm
№
Description
№
Description
①
USB OTG
④
Micro HDMI
②
USB 2.0
⑤
LAN/ Optional PoE
③
RS485
⑥
12V DC in (Power jack)