Winmate R10IB3S-67T2 User manual

Full IP67
Stainless Resistive
Panel PC
Intel®Celeron®Bay Trail-M N2930 1.83 GHz
R10IB3S-67T2
R15IB3S-67C3
R19IB3S-67A1
User Manual
Version 1.1

USER MANUAL CONTENTS
- 2 -
Contents
PREFACE .................................................................................................................- 4 -
ABOUT THIS USER MANUAL ...............................................................................- 12 -
CHAPTER 1: INTRODUCTION...............................................................................- 14 -
1.1 Product Features ....................................................................................- 14 -
1.2 Package Content ....................................................................................- 15 -
1.3 Schematics and Dimensions...................................................................- 16 -
1.3.1 Dimensions 10.4" ..........................................................................- 16 -
1.3.2 Dimensions 15" .............................................................................- 16 -
1.3.3 Dimensions 19” .............................................................................- 17 -
1.4 Connector Placement .............................................................................- 18 -
1.5 Physical Button and LED Indicators........................................................- 19 -
CHAPTER 2: GETTING STARTED ........................................................................- 21 -
2.1 Powering On ...........................................................................................- 21 -
2.1.1 AC Adapter Components ..............................................................- 21 -
2.1.2 Power Considerations ...................................................................- 22 -
2.1.3 Power Consumption......................................................................- 22 -
2.1.4 Connecting the Power...................................................................- 23 -
2.2 Connector Pin Assignments....................................................................- 24 -
2.2.1 Power Cable..................................................................................- 24 -
2.2.2 Serial Cable...................................................................................- 25 -
2.2.3 Ethernet Cable ..............................................................................- 26 -
2.2.4 USB 2.0 Cable ..............................................................................- 27 -
2.3 Turning On and Off .................................................................................- 28 -
CHAPTER 3: OPERATING THE DEVICE ..............................................................- 30 -
3.1 Operating System ...................................................................................- 30 -
3.2 How to Enable Watchdog .......................................................................- 31 -
CHAPTER 4: AMI UEFI BIOS SETUP....................................................................- 33 -
4.1 When and How to Use BIOS Setup ........................................................- 33 -
4.2 BIOS Functions.......................................................................................- 33 -
4.2.1 Main Menu ....................................................................................- 35 -
4.2.2 Advanced Menu ............................................................................- 36 -
4.2.3 Chipset Menu ................................................................................- 56 -

USER MANUAL CONTENTS
- 3 -
4.2.4 Security Menu ...............................................................................- 57 -
4.2.5 Boot Configuration ........................................................................- 58 -
4.2.6 Save & Exit....................................................................................- 60 -
4.3 Using Recovery Wizard to Restore Computer................................................- 62 -
CHAPTER 5: DRIVER INSTALLATION .................................................................- 66 -
5.1 Chipset Driver .........................................................................................- 66 -
5.2 Graphics Driver.......................................................................................- 68 -
5.3 Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8) .................- 69 -
5.4 Intel Trusted Engine Interface (Intel TXE) Driver ....................................- 70 -
5.5 Intel Network Connections Driver............................................................- 71 -
5.6 Audio Driver ............................................................................................- 72 -
CHAPTER 6: MOUNTING.......................................................................................- 74 -
6.1 Cable Mounting Considerations..............................................................- 74 -
6.2 Safety Precautions..................................................................................- 75 -
6.3 Mounting Guide.......................................................................................- 76 -
6.3.1 VESA Mount..................................................................................- 76 -
6.3.2 Yoke Mount...................................................................................- 77 -
CHAPTER 7: TECHNICAL SUPPORT ...................................................................- 79 -
7.1 Software Developer Support...................................................................- 79 -
7.2 Problem Report Form .............................................................................- 80 -
APPENDIX A: PRODUCT SPECIFICATIONS........................................................- 82 -
APPENDIX B: ORDERING INFORMATION ...........................................................- 85 -

USER MANUAL PREFACE
- 4 -
PREFACE
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in
any form or by any means, electronic or mechanical, for any purpose, without the
prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to
improve design and/or performance. We assume no responsibility or liability for the
use of the described product(s) conveys no license or title under any patent,
copyright, or masks work rights to these products, and make no representations or
warranties that these products are free from patent, copyright, or mask work right
infringement, unless otherwise specified. Applications that are described in this
manual are for illustration purposes only. We make no representation or guarantee
that such application will be suitable for the specified use without further testing or
modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from
material and workmanship defects for a period of one year from the invoice date. If
the customer discovers a defect, we will, at his/her option, repair or replace the
defective product at no charge to the customer, provide it is returned during the
warranty period of one year, with transportation charges prepaid. The returned
product must be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by over 30 days,
the in-warranty service will be made according to the shipping date. In the serial
numbers the third and fourth two digits give the year of manufacture, and the fifth
digit means the month (e. g., with A for October, B for November and C for
December).
For example, the serial number 1W17Axxxxxxxx means October of year 2017.

USER MANUAL PREFACE
- 5 -
Customer Service
We provide a service guide for any problem by the following steps: First, visit the
website of our distributor to find the update information about the product. Second,
contact with your distributor, sales representative, or our customer service center
for technical support if you need additional assistance.
You may need the following information ready before you call:
•Product serial number
•Software (OS, version, application software, etc.)
•Description of complete problem
•The exact wording of any error messages
In addition, free technical support is available from our engineers every business
day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.

USER MANUAL PREFACE
- 6 -
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful
information or to alert you to the potential for hardware damage or personal injury.
These are Notes, Important, Cautions, and Warnings. The following is an example of
each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and explains
how to avoid the potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et
explique comment éviter le problème potentiel.
WARNING!/AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur
des emplacements électriques et comment éviter ces problèmes.
ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol indicates the
potential risk of serious electrical shock due to improper grounding.
Le symbole de Mise à Terre indique le risqué potential de choc
électrique grave à la terre incorrecte.

USER MANUAL PREFACE
- 7 -
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques
sensibles peuvent être endommagées par des sauts d’alimentation.
Seulement du personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before touching
the CPU card. Modern electronic
devices are very sensitive to static
electric charges. As a safety precaution, use a grounding wrist strap
at all times. Place all electronic components in a static
-dissipative
surface or static
-shielded bag when they are not in the chassis.
Toujours
verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements
électroniques moderns sont très sensibles aux décharges
d’électricité statique. Toujours utiliser un bracelet de mise à la terre
comme préc
aution. Placer toutes les composantes électroniques
sur une surface conçue pour dissiper les charge, ou dans un sac
anti
-statique lorsqu’elles ne sont pas dans le chassis.

USER MANUAL PREFACE
- 8 -
Safety Precautions
For your safety carefully read all the safety instructions before using the
device. Keep this user manual for future reference.
•Always disconnect this equipment from any AC outlet before cleaning.
Do not use liquid or spray detergents for cleaning. Use a damp cloth.
•For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
•Keep this equipment away from humidity.
•Put this equipment on a reliable surface during installation. Dropping it
or letting it fall could cause damage.
•The openings on the enclosure are for air convection and to protect the
equipment from overheating.
CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!
•Before connecting the equipment to the power outlet make sure the
voltage of the power source is correct.
•Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
•If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient over-voltage.
•Never pour any liquid into an opening. This could cause fire or electrical
shock.
•Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.
•All cautions and warnings on the equipment should be noted.
*Let service personnel to check the equipment in case any of the
following problems appear:
oThe power cord or plug is damaged.
oLiquid has penetrated into the equipment.
oThe equipment has been exposed to moisture.
oThe equipment does not work well or you cannot get it to work
according to the user manual.
oThe equipment has been dropped and damaged.
oThe equipment has obvious signs of breakage.
•Do not leave this equipment in an uncontrolled environment where the
storage temperature is below -20°C (-4°F) or above 60°C (140°F). It may
damage the equipment.

USER MANUAL PREFACE
- 9 -
CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l’appareil de fixation recommandé pour éliminer le risque
de blessure.
WARNING! / AVERTISSEMENT!
Only use the connection cords that come with the product. When in
doubt, please contact the manufacturer.
Utiliser seulement les cordons d’alimentation fournis avec le
produit. Si vous doutez de leur provenance, contactez le
manufacturier.
WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the device.
Toujours vérifier votre mise à la terre afin que l’équipement ne se
décharge pas sur vous.
•Cover workstations with approved anti-static material. Use a wrist
strap connected to a work surface and properly grounded tools and
equipment.
•Use anti-static mats, heel straps, or air ionizer for added protection.
•Handle electrostatic-sensitive components, PCB’s and assemblies by
the case or the edge of the board.
•Avoid contact with pins, leads, or circuitry.
•Turn off power and input signals before inserting and removing
connectors or test equipment.
•Keep the work area free of non-conductive materials, such as ordinary
plastic assembly aids and Styrofoam.
•Use filed service tools, such as cutters, screwdrivers, and vacuum
cleaners that are conductive.
•Always put drivers and PCB’s component side on anti-static foam.

USER MANUAL PREFACE
- 10 -
Important Information
Countries/
Area
Symbol
This equipment complies with essential
requirements of:
European Union
Electromagnetic Compatibility
Directive(2014/30/EU)
Low Voltage Directive (2014/35/EU)
Restrictions of the use of certain hazardous
substances (RoHS) Directive (2011/65/EU)
USA
FCC Part 15 Subpart B Regulations Class B
Federal Communications Commission Radio Frequency Interface Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "B"
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
him own expense.
.

USER MANUAL PREFACE
- 11 -
European Union
This equipment is in conformity with the requirement of the following EU
legislations and harmonized standards. Product also complies with the Council
directions.
Electromagnetic Compatibility Directive (2014/30/EU)
•EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
•EN55032: 2012/AC:2013
•EN61000-3-2:2014
•EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
•EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

USER MANUAL ABOUT THIS USER MANUAL
- 12 -
ABOUT THIS USER MANUAL
This User Manual provides information about using the Winmate® IP67 Stainless
Resistive Panel PC with Intel ® Celeron ® Bay Trail-M N2930 1.83 GHz processor.
This User Manual applies to the IP67 Stainless Resistive Panel PC – R10IB3S-67T2,
R15IB3S-67C3 and R19IB3S-67A1.
The documentation set for the IP67 Stainless Resistive Panel PC provides information
for specific user needs, and includes:
•IP67 Stainless Resistive Panel PC User Manual – contains detailed
description on how to use the Panel PC, its components and features.
•IP67 Stainless Resistive Panel PC Quick Start Guide - contains detailed
description on how to use the Panel PC, its components and features.
NOTE:
Some pictures in this guide are samples and can differ from actual
product.
Document Revision History
Version Date Note
1.0 15-Dec-2017 Initial document release
1.1 29-Jul-2020
Revise panel
specifications of the
R15IB3S-67C3

USER MANUAL CHAPTER 1 INTRODUCTION
- 13 -
INTRODUCTION
This chapter gives you product
overview, describes features and
hardware specification. You will find all
accessories that come with the device in
the packing list. Mechanical dimensions
and drawings included in this chapter.

USER MANUAL CHAPTER 1 INTRODUCTION
- 14 -
CHAPTER 1: INTRODUCTION
Congratulations on purchasing Winmate® IP67 Stainless Resistive Panel PC.
Winmate® IP67 Stainless Resistive Panel PC is rugged, industrial-grade panel
PC series built to withstand challenging environments, undergoing rigorous
testing to ensure safety and top performance. All of the models in the series are
sealed to IP67 standard. Stainless housing features anti-corrosion properties
making it suitable for food, chemical and pharmaceutical industries.
Winmate® IP67 Stainless Resistive Panel PC goes beyond that of the standard
industrial panel computers with rugged construction, powerful performance, and
flexible mounting options.
1.1 Product Features
Winmate® IP67 Stainless Resistive Panel PC features:
•10.4”, 15” and 19”
•Intel® Celeron Bay Trail-M N2930 1.83 GHz Processor
•Fanless Design
•Full IP67 dust and water resistant
•Stainless Housing with anti-corrosion treatment
•Optical Bonding with anti-moisture treatment
•Various mounting solutions: Yoke mount and VESA mount
•5 Wire Resistive Touch (Optional)

USER MANUAL CHAPTER 1 INTRODUCTION
- 15 -
1.2 Package Content
Carefully remove the box and unpack your Panel PC. Please check if all the
items listed below are inside your package. If any of these items are missing or
damaged contact us immediately.
Standard factory shipment list
Panel PC
IP67 Stainless
Resistive Panel PC
Quick Start Guide
(Hardcopy)
Driver CD & SBC User
Manual
Varies by product
specifications
9152111I102Q IB32: 9171111I101Y
AC Adapter Power Cable Serial Cable
50W 90PO12050002
80W 90PO12080003
Varies by destination 94G0103090Q0
Ethernet Cable USB Cable VESA Screws
94I0080080KF 9480108080Q0 913511101101

USER MANUAL CHAPTER 1 INTRODUCTION
- 16 -
1.3 Schematics and Dimensions
This section contains mechanical drawing of the panel PC. Notice that this is a
simplified drawing and some components are not marked in detail.
1.3.1 Dimensions 10.4"
Unit: mm
1.3.2 Dimensions 15"
Unit: mm

USER MANUAL CHAPTER 1 INTRODUCTION
- 17 -
1.3.3 Dimensions 19”
Unit: mm

USER MANUAL CHAPTER 1 INTRODUCTION
- 18 -
1.4 Connector Placement
IP67 Flat Stainless Resistive Panel PC has IP67 type connectors with protection
cap.
For cable specifications refer to the Ch.2,“Cable Specifications” of this user
manual.

USER MANUAL CHAPTER 1 INTRODUCTION
- 19 -
1.5 Physical Button and LED Indicators
Physical Button and LED Indicators located on the rear side of the Panel PC.
Physical Buttons
Icon
Button
Description
Reset Press to reset the system
Power On/
Off Press to power on or power off the device
LED Indicators
LED Type
Status
Description
On
Power is on
Off Power is off
Blinking Storage activity (Data is being read or written)
Off
System is idle

USER MANUAL CHAPTER 2 GETTING STARTED
- 20 -
GETTING STARTED
This chapter tells you important information
on power supply, adapter and precautions
tips. Pay attention to power considerations.