Winmate W10IB3S-PCH2AC-PoE S-Series User manual

10.1"S-Series HMI
W10IB3S-PCH2AC-PoE (with LED light bar)
W10IB3S-PCH2-PoE (without LED light bar)
Slim-line
Quick Start Guide
Version 1.0
Document Part Number: 9154111I100A

ii
Contents
Regulations and Safety Notice......................................................................................................3
Advisory Conventions ..................................................................................................................4
1 Introduction..............................................................................................................................5
1.1 Product Features.................................................................................................................. 5
1.2 Hardware Specifications ......................................................................................................6
1.3 Software Support................................................................................................................. 7
2 Appearance...............................................................................................................................8
3 Hot Tab .....................................................................................................................................9
3.1 Hot Tab Menu ...................................................................................................................... 9
3.2 Utilities ................................................................................................................................. 9
3.3 Brightness.............................................................................................................................9
3.4 Volume...............................................................................................................................10
3.5 Performance ...................................................................................................................... 10
3.6 Touch Lock .........................................................................................................................10
3.7 LED Light Bar (Only for models with LED Light Bar)...........................................................11
3.7.1 Easy-Testing............................................................................................................. 11
3.7.2 LED Light Bar Adjustment........................................................................................ 11
3.8 HF RFID (Only for models with RFID) ................................................................................. 13
3.8.1 Introduction............................................................................................................. 13
3.8.2 Reading Mode ......................................................................................................... 15
3.8.3 Writing Mode .......................................................................................................... 16

10.1” S-Series HMI
Quick Start Guide 3
Regulations and Safety Notice
European Union
This equipment is in conformity with the requirement of the
following EU legislations and harmonized standards. Product also
complies with the Council directions.
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010 EN 55022: 2010 Class B
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2013
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55022: 2010/AC:2011
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/30/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
Federal Communications Commission Radio Frequency Interface
Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "A"
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
him own expense.

10.1” S-Series HMI
Quick Start Guide 4
Advisory Conventions
Four types of advisories are used throughout the user guide to provide helpful
information or to alert you to the potential for hardware damage or personal injury.
These are Notes, Important, Cautions, and Warnings. The following is an example of
each type of advisory.
NOTE:
A note is used to emphasize helpful information.
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION
A Caution alert indicates potential damage to hardware and explains how
to avoid the potential problem.
WARNING!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.

10.1” S-Series HMI
Quick Start Guide 5
1 Introduction
Interactive and smart automation systems of intelligent buildings are in a fast growing
phase. Winmate multi-touch S-Series HMI is suitable for home automation and room
management systems. Flat surface is easy-to-clean and delivers aesthetically pleasing
look for any interior. The device provides real time update for booking status and
available schedule, or performs as a synchronous display in meetings. Optional HF RFID
13.56 MHz is especially useful in access control applications.
S-Series HMI run on 1.83GHz Intel® Celeron® N2930 processor and support Windows 10
IoT, Windows Embedded 8.1 Industry Pro, Windows Embedded 8Standard, Windows 7
Pro for Embedded Systems, and Windows Embedded Standard 7–WS7P. The HMI
features P-Cap touch-screen with 1280 x 800 pixel resolution. For easy, quick and cost
effective network installations both models support PoE. These models sealed with
front IP 65 dust and water proof, and IP22 on the back side.
The W10IB3S-PCH2AC-PoEmodel supports an exceptional feature - LED light bar. With
the help of red, green, blue and orange LED indicators you can see the status of the
machine or processes afar. It significantly reduces power consumption by keeping the
display turned off.
1.1 Product Features
Model Name
W10IB3S-PCH2AC-PoE
W10IB3S-PCH2-PoE
Product Line
10.1”S-Series HMI (Slim-line)
Resolution
1280 x 800
Operating System
Windows 10 IoT
Windows Embedded 8.1 Industry Pro
Windows Embedded 8Standard
Windows 7 Pro for Embedded Systems
Windows Embedded Standard 7–WS7P
CPU
Ultra-low power consumption with Intel® Celeron® N2930
processor
Cooling System
Fanless cooling system
IP Rating
Front: IP65 water and dust proof
Rear: IP22
LED Light Bar
Default
N/A
HF RFID
Optional
N/A
PoE
Default (IEEE 802.3at)

10.1” S-Series HMI
Quick Start Guide 6
1.2 Hardware Specifications
System:
Processor
Intel ® Celeron ® Bay Trail-M N2930 1.83GHz
System Chipset
Intel® ATOM SoC Integrated
System Memory
2GB DDR3L 1066/1333 SO-DIMM (optional 4GB)
Storage
64GB mSATA SSD
LAN
Dual Intel® WG82574L GbE LAN
Display:
Size/Type
10.1" TFT (widescreen)
Resolution
1280x800
Brightness
300 cd/m (typ.)
Contrast Ratio
800:1 (typ.)
Viewing Angle
-89~89(H);-89~89(V)
Max Colors
262K(6bit)
Touch
Projective-capacitive touch (up to 4points)
Input / Output:
Serial Ports
1 x RS-232/422/485
USB Ports
1 x USB 3.0, 1 x USB 2.0
Ethernet
2 x RJ 45-10/100/1000 Mbps
HDMI
1 x HDMI
Speaker
1 x 1 watt speaker
*Digital I/O
1 x 1 digital I/O
Mechanical Specification:
Cooling System
Fan-less design
Mounting
VESA Mount (75x75mm)
Dimensions
(W x H x D)
263.28 x 171 x 35.7 (mm)
Environment:
Operating Temperature
0 °C to +50 °C
Operating Humidity
10% to 90% (non-condensing)
IP Rating
Front: IP65 water and dust proof
Rear: IP22
Power Considerations:
Power Input
12V DC in terminal block (phoenix type)
*optional

10.1” S-Series HMI
Quick Start Guide 7
1.3 Software Support
Drivers:
Chipset Driver
Graphics Driver
Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8)
Intel Trusted Engine Interface (Intel TXE) Driver
Audio Driver
USB 3.0 Driver (Windows 7)
SDK:
Watchdog SDK
Digital I/O SDK
LED Light Bar Porting Guide
RFID Porting Guide

10.1” S-Series HMI
Quick Start Guide 8
2 Appearance
In this section you can see the appearance of the HMI and its I/O connectors.
Front View
W10IB3S-PCH2AC-PoE
W10IB3S-PCH2-PoE
(with LED Light Bar)
(without LED Light Bar)
Rear and Top View
Bottom View
*Digital I/O is an optional connector

10.1” S-Series HMI
Quick Start Guide 9
3 Hot Tab
In this section you will find instructions on how to operate the HMI device with Hot Tab.
3.1 Hot Tab Menu
1. Double-click the Hot Tab icon on the Windows desktop.
2. The Hot Tab main menu will appear on the screen as shown below.
3.2 Utilities
Utilities category allows automatically changing orientation
from landscape to portrait mode or rotating the desktop to
a different degree as 0°,90°, 180°, and 270°.
3.3 Brightness
Tap Brightness button to show current brightness level.
To reduce the brightness, drag by touch to left.
To enhance the brightness, drag by touch to right.
Tap Close to save the changes and exit the interface.

10.1” S-Series HMI
Quick Start Guide 10
3.4 Volume
Tap Volume button to show your current volume level.
To decrease the volume, drag by touch to left.
To increase the volume, drag by touch to right.
3.5 Performance
User can adjust the performance level of the HMI device. There are four options
available:
Extreme performance
Office Document
High performance
Power Saving
3.6 Touch Lock
To LOCK touch screen, double-click the Hot Tab icon on the Windows desktop,
and tap Touch Lock.
To UNLOCK Touch Screen, tap button to the right.

10.1” S-Series HMI
Quick Start Guide 11
3.7 LED Light Bar (Only for models with LED Light Bar)
3.7.1 Easy-Testing
Tap this button to access the LED light bar control panel, and select Red / Green / Blue/
Orange color to be displayed on the LED Bar.
3.7.2 LED Light Bar Adjustment
This section describes how to adjust LED Light Bar with RS-232 settings.
Baud Rate:
9600
Data Bits:
8
Parity:
None
Stop Bits:
1
Reading Version
NO.
Function
Length
Command
Index
Checksum(*1)
Note
1
Part Number
Reading
0x04
0xA0
0x00
0x5c
Return ASCII Part
Number(Stable 12
codes)
2
Part Name
Reading
0x04
0xA0
0x01
0x5b
Return ASCII Part
Name (Stable 30
codes)
*1: Checksum is 2’s complement of sum of length and all messages.
Example:
BIOS BOM Part Number
93I30000WN0A
BIOS Part Name
IBMC100-LED000000-000-VV100-WN

10.1” S-Series HMI
Quick Start Guide 12
PC command
0x04 0xA0 0x00 0x5C
Target Board Return
93I30000WN0A
PC command
0x04 0xA0 0x01 0x5b
Target Board Return
IBMC100-LED000000-000-VV100-WN
Reading Function
PC command
VRD
NO.
Function
Length
Command
index
CKS
(*1)
Length
index
Data
CKS(*1)
supplement
1
LED_RED
0x04
0x60
0x10
0x8C
0x04
0x10
0x00-
0xFF
0xEC~0
xED
Default 0xFF
2
LED_GRE
EN
0x04
0x60
0x11
0x8B
0x04
0x11
0x00-
0xFF
0xEB~0
xEC
Default 0xFF
3
LED_BLU
E
0x04
0x60
0x12
0x8
A
0x04
0x12
0x00-
0xFF
0xEA~0
xEB
Default 0xFF
*1: Checksum is 2’s complement of sum of length and all messages.
Reply Value :
ACK
3 C F1
Set Success
NSP
3 B F2
Not Success
*1: Checksum is 2’s complement of sum of length and all messages.

10.1” S-Series HMI
Quick Start Guide 13
Setting Function
NO.
Function
Length
Command
index
Value
Checksum(*1)
Supplement
1
Load
Default
0x05
0x40
0x21
0x00
0x9A
2
LED_RED
0x05
0x61
0x10
0x00-0xFF
0x8A~0x8B
Default 0xFF
3
LED_GREEN
0x05
0x61
0x11
0x00-0xFF
0x89~0x8A
Default 0xFF
4
LED_BLUE
0x05
0x61
0x12
0x00-0xFF
0x88~0x89
Default 0xFF
5
LED_ALL
0x05
0x61
0x13
0x00-0xFF
0x87~0x88
Default 0xFF
Reply Value :
ACK
3 C F1
Set Success
NSP
3 B F2
Not Success
*1: Checksum is 2’s complement of sum of length and all messages.
3.8 HF RFID (Only for models with RFID)
HF RFID is commonly used for ticketing, payment, and data transfer applications.
3.8.1 Introduction
The RFID Reader is located on the bottom right front side of the HMI device.
The COM Port setting in RFID Reader is “COM 14”
1. Double-click the RFID icon on the Windows desktop.
2. Reader menu appears on the screen as shown below.
Note:
The picture below of Reader Demo Version 1.4 is for illustration purposes
only. Your Reader version may differ from the picture below.

10.1” S-Series HMI
Quick Start Guide 14
Reader Demo Version 1.00
The RFID Reader can read and write data according to different HF RFID standards.
HF RFID Standard
Purpose
ISO-14443 A
Standard for MIFARE technology, which used in smart
cards and proximity cards
ISO-15693
Standard for tracking items
ISO-18092
Standard for Near Field Communication (NFC), a short
range technology that is commonly used for data
exchange between devices

10.1” S-Series HMI
Quick Start Guide 15
3.8.2 Reading Mode
Select the default RFID Reader COM14or press Search on the upper left corner of the
screen. The system will automatically find RFID COM port, show the Version.
UID0 Menu
The system will read the data once the card will be near. You can select different reader
modes. Each mode is described below.
Item
№
Key button
Function
3
*A0- Continuous Read
The RFID Reader will perform a series of multiple
scanning operations
4
A1- Once Read
The RFID Reader will perform a single scanning
operation during the card is near
5
A9- Type Read
The RFID Reader will perform a scanning operation of
IC type tag
* Default
To scan the card, bring it close to the right bottom front side of device with RFID icon.
№
Data 32
Function
6
XXXXXXXXXXXXXABCDEF
Display the information written in the card
Item
№
Key button
Function
1
E1- Version
Displays the current version of RFID Reader system
2
E2- Reset
Reset all settings

10.1” S-Series HMI
Quick Start Guide 16
3.8.3 Writing Mode
*Refer to the RFID Porting Guide SDK to configure Writing Mode parameters.
**Refer to file RF-521L V1 02_Spec sheet_140430.pdf in our CD if user needs more RFID
SDK instruction.
IMPORTANT:
Use PoE Hub for more than 25 Watt

Winmate Inc.
9F, No.111-6, Shing-De Rd., San-Chung Dist.,
New Taipei City 24158, Taiwan, R.O.C
Tel: [phone]
Fax: [phone]
Email: [email protected]
Official website: http://www.winmate.com.tw