Winmate PT Series User manual

Please read these instructions carefully before using this product, and save this manual for future use
PT Series Multi-Touch
Chassis HMI
Freescale® Cortex A9 i.MX6 Dual Core, 1GHz
(Optional Quad Core)
Model No. R15FA3S-PTC3
W15FA3S-PTA3
User Guide
Part No. 91521110101V
Version 1.1

2
PT Series Android HMI User Guide
Contents
Preface 4
Chapter 1: Introduction 8
1.1 Features 8
1.2 Package Contents 8
1.3 Mechanical Dimensions 9
1.4 Connector Description 10
1.5 Physical Buttons and LED Indicators 10
Chapter 2: Installation 11
2.1 Wiring Requirements 11
2.2 VESA Mounting 12
2.3 Turning On 13
2.4 Connecting Peripherals 14
2.4.1 Power Input Connector 14
2.4.2 Serial Port Connector 14
2.4.3 Ethernet Connector 14
2.4.4 USB 2.0 Connector 15
3.4.5 USB OTG Connector 15
3.4.6 Micro SD Card Slot 15
2.5 Speaker 16
Chapter 3: Operating the Device 17
3.1 Home Screen 17
3.2 Quick Settings 18
3.3 Configuring Serial Port Settings 20
3.4 Brightness Adjustment 22
3.5 Ethernet 23
3.5.1 Configuring Ethernet Settings 24
3.5.2 Configuring Ethernet 25
3.6 Winmate® Home Manager (WHM) 26
3.6.1 How to Lock Applications 26
3.6.2 How to Unlock Applications 29
3.6.3 How to Change Password 30
Chapter 4: Software Installation 31
4.1 Android Debug Bridge Driver Installation 31
4.1.1 Disabling Driver Signature on Windows 8 32
4.1.2 ADB Driver Installation 36
4.2 Installing Android Debug Bridge (ADB) 40
4.3 Downloading Image Tool 41
4.4 OTA Update Guide 41

3
Preface
4.5 OS Image Update Guide 45
Appendix 46
Appendix A: Product Specifications 46
Appendix B: Cleaning the LCD Monitor 47
Appendix C: Technical Support 47

Please read these instructions carefully before using this product, and save this manual for future use
4
PT Series Android HMI User Guide
Preface
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two
conditions:
This device may not cause harmful
interference.
This device must accept any interference
received including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "A"
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at him
own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
This equipment is in conformity with the requirement of the following EU
legislations and harmonized standards. Product also complies with the Council
directions.

5
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in
any form or by any means, electronic or mechanical, for any purpose, without the
prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including
circuits and/or software described or contained in this manual in order to improve
design and/or performance. We assume no responsibility or liability for the use of
the described product(s) conveys no license or title under any patent, copyright, or
masks work rights to these products, and make no representations or warranties
that these products are free from patent, copyright, or mask work right infringement,
unless otherwise specified. Applications that are described in this manual are for
illustration purposes only. We make no representation or guarantee that such
application will be suitable for the specified use without further testing or
modification.
Warranty
Our warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer
discovers a defect, we will, at his/her option, repair or replace the defective product
at no charge to the customer, provide it is returned during the warranty period of one
year, with transportation charges prepaid. The returned product must be properly
packaged in its original packaging to obtain warranty service. If the serial number
and the product shipping data differ by over 30 days, the in-warranty service will be
made according to the shipping date. In the serial numbers the third and fourth two
digits give the year of manufacture, and the fifth digit means the month (e. g., with A
for October, B for November and C for December).
For example, the serial number 1W16Axxxxxxxx means October of year 2016.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the
website of our distributor to find the update information about the product. Second,
contact with your distributor, sales representative, or our customer service center for
technical support if you need additional assistance.

6
PT Series Android HMI User Guide
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful
information or to alert you to the potential for hardware damage or personal injury.
These are Notes, Important, Cautions, and Warnings. The following is an example
of each type of advisory.
Note:
A note is used to emphasize helpful information
Important:
An important note indicates information that is important for you
to know.
Caution/ Attention
A Caution alert indicates potential damage to hardware and
explains how to avoid the potential problem.
Unealerted’ attention indique un dommage possible à
l’équipement et explique comment éviter le problem potentiel.
Warning!/ Avertissement!
An Electrical Shock Warning indicates the potential harm from
electrical hazards and how to avoid the potential problem.
Un Avertissement de Choc Électriqueindique le potentiel de
chocssur des emplacements électriques et comment éviterces
problèmes.

7
Preface
Safety Information
Warning!/ Avertissement!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not make
connections while the power is on. Sensitive electronic
components can be damaged by sudden power surges. Only
experienced electronics personnel should open the PC
chassis.
Toujours débrancher le cordon d’alimentation du chassis
lorsque vous travaillez sur celui-ci. Ne pas brancher de
connections lorsque l’alimentation est présente. Des
composantes électroniques sensibles peuvent être
endommagées par des sauts d’alimentation. Seulement du
personnel expérimenté devrait ouvrir ces chassis.
Caution/ Attention
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute
charge statique avant de toucher la carte CPU. Les
équipements électroniques moderns sont très sensibles aux
décharges d’électricité statique. Toujours utiliser un bracelet
de mise à la terre comme précaution. Placer toutes les
composantes électroniques sur une surface conçue pour
dissiper les charge, ou dans un sac anti-statique lorsqu’elles
ne sont pas dans le chassis.
RoHS Declaration
According to the European Union issued Directive 2011/65/EU on the restriction of
the use of certain hazardous substances in electrical and electronic equipment
(RoHS 2.0). Winmate Inc.’s guaranty is able to meet the current regulations and
customer requirements in respect of the application of cadium, lead, mercury,
hexavalent chromium, PBBs, PBDEs in its product.

8
PT Series Android HMI User Guide
Chapter 1: Introduction
The PT Series HMI runs on low power consuming Freescale® Cortex A9 i.MX6 Dual
Core processor. Multiple I/O interface includes USB 2.0 and USB OTG, one LAN
port, serial interface RS-232/422/485 and CANBus for machine-to-machine
communications, mini USB console port and micro SD card for storage expansion.
Chassis housing is protected with IP65 standard against water and dust from the
front. The PT Series HMI is an ultimate solution for Point-of-Sale (POS) applications.
1.1 Features
15/ 15.6”screen with P-Cap touch
Freescale® Cortex A9 i.MX6 Dual Core processor
Fanless cooling system and ultra-low power consumption
Front IP65 for protection against water and dust
A true flat, easy-to-clean front surface with edge-to-edge design
Plastic housing
Designed for Point-of-Sale (POS) applications
1.2 Package Contents
Carefully remove the box and unpack your device. Please check if all the items
listed below are inside your package. If any of these items are missing or
damaged contact us immediately.
Standard factory shipment list:
HMI Device
Quick Start Guide
Driver CD
Varies by product specifications
Part No. 91521110101W
Part No. 9171111I103L
AC Adapter 12V/ 50W
Power Cord
Terminal Block to DC
Jack
Part No.922D050W12VA
Varies by country
Part No. 94J602G020K0

9
Chapter 1: Introduction
1.3 Mechanical Dimensions
15-inch, R15FA3S-PTC3
Unit: mm
Dimensions:352.50 x 276.70 x 45
15.6-inch, W15FA3S-PTA3
Unit: mm
Dimensions:388 x 233 x 40

10
PT Series Android HMI User Guide
1.4 Connector Description
Terminal interfaces are located on the bottom side of the HMI device.
Note:
Notice that input and output connectors vary by product size and specifications.
Terminal interfaces description:
Item
Description
MicroSD Card Slot –Insert microSD card to expand the storage.
RJ45 –Connects HMI device to Ethernet network. Supports PoE for
power transmission in network equipment, via network UTP cable,
together with data.
USB OTG –. Connect to PC for client use and update OS Image.
RS-232/422/485 –Connects external devices to HMI device.
Example: A barcode reader or scanner to HMI device.
CANBus –Allow device to communicate with each other without host
computer.
Example: A machine controller to HMI device.
USB 2.0- Connects USB2.0 compatible devices to HMI device.
Example: A printer to HMI device.
2 Pin Terminal Block –Use to provide DC power to HMI device.
1.5 Physical Buttons and LED Indicators
PT Series HMI has Power and Reset physical buttons located on the back side.
Item
Description
Power Button –Press to turn on/ off the device.
Reset Button –Press to forcible shut down and reset the device.
PT Series HMI has Power LED indicator located on the back side.
Item
Description
Power LED Indicator –Lights up when HMI device is powered on.

11
Chapter 2: Installation
Chapter 2: Installation
2.1 Wiring Requirements
The following common safety precautions should be observed before installing any
electronic device:
Strive to use separate, non-intersecting paths to route power and networking
wires. If power wiring and device wiring paths must cross make sure the wires
are perpendicular at the intersection point.
Keep the wires separated according to interface. The rule of thumb is that
wiring that shares similar electrical characteristics may be bundled together.
Do not bundle input wiring with output wiring. Keep them separate.
When necessary, it is strongly advised that you label wiring to all devices in
the system.
Caution
Do not run signal or communication wiring and power wiring in the same
conduit. To avoid interference, wires with different signal characteristics (i.e.,
different interfaces) should be routed separately.
Be sure to disconnect the power cord before installing and/or wiring your
device.
Verify the maximum possible current for each wire gauge, especially for the
power cords. Observe all electrical codes dictating the maximum current
allowable for each wire gauge.
If the current goes above the maximum ratings, the wiring could overheat,
causing serious damage to your equipment.
Be careful when handling the unit. When the unit is plugged in, the internal
components generate a lot of heat which may leave the outer casing too hot
to touch.

12
PT Series Android HMI User Guide
2.2 VESA Mounting
This device supports VESA Mounting and provides various types of mounting
options to fit any industrial use.
Size
VESA Plate
Screw Size
15”
75x75 mm, 100x100 mm
M4 x 5
15.6”
75x75 mm, 100x100 mm, 200 x 100 mm
M4 x 8
Mounting Instruction
Use Philips M4x5 screws to fix the desk stand to VESA holes on the back cover of
the device.
*The picture is for demonstration purposes only. VESA mount accessories are not
supplied by Winmate.

13
Chapter 2: Installation
2.3 Turning On
Follow the following steps to turn on your device:
1. Connect one side of 2-pin terminal block to DC jack connector to the HMI.
Connect the other side to the AC adapter.
2. Connect the power cord to AC adapter.
3. Plug the power cord to the AC outlet.
4. Press Power button on the rear OSD panel.

14
PT Series Android HMI User Guide
2.4 Connecting Peripherals
2.4.1 Power Input Connector
The DC power source input of the HMI is a 2 pin terminal block connector that
supports 12V DC power input.
Pin assignment and signal names of power input connector
2.4.2 Serial Port Connector
The HMI has one serial port connector to connect your device to external devices
such as mouse, modem or printer.
Pin assignment and signal names of serial port
You can configure serial port
settings by software.
2.4.3 Ethernet Connector
The HMI supports one RJ45 10/100/1000 Mbps Ethernet interface for connecting
to the internet.
Pin assignment and signal names of Ethernet connector
Voltage
Minimum Voltage 11.4V
Maximum Voltage 12.6V
Maximum Current 4.2A
Pin №
RS-232
(Default)
RS-422
RS-485
1
DCD
TxD-
D-
2
RXD
TxD+
D+
3
TXD
RxD+
NC
4
DTR
RxD-
NC
5
GND
GND
GND
6
DSR
NC
NC
7
RTS
NC
NC
8
CTS
NC
NC
9
RI
NC
NC
Pin №
Signal Name
Pin №
Signal Name
1
TX1+
2
TX1-
3
TX2+
4
TX2-
5
TX3+
6
TX3-
7
TX4+
8
TX4-

15
Chapter 2: Installation
IMPORTANT:
Power Device (PD): follows IEEE 802.3at (25 Watt)
2.4.4 USB 2.0 Connector
Use USB A Type (USB 2.0) connector to connect your device to other USB 2.0
compatible devices.
Pin assignment and signal names of USB 2.0 connector
3.4.5 USB OTG Connector
Use USB OTG connector to connect the HMI to other USB On-The-Go compliant
devices such as flash drives, digital cameras, mice or keyboards. Use USB OTG
cable to install software on the HMI.
Pin assignment and signal names of USB OTG connector
3.4.6 Micro SD Card Slot
Insert microSD card to microSD card slot to extend the memory of your HMI.
Pin assignment and signal names of micro SD card slot
Pin №
Signal Name
Pin №
Signal Name
1
+5V
2
USB_D-
3
USB_D+
4
GND
Pin №
Signal Name
Pin №
Signal Name
1
+5V
2
USB_OTG_D-
3
USB_OTG_D
+
4
USB_OTG_ID
5
GND
Pin №
Signal Name
Pin №
Signal Name
1
DATA2
2
DATA3
3
CMD
4
+3.3V
5
CLK
6
GND
7
DATA0
8
DATA1
9
Card_Det

16
PT Series Android HMI User Guide
2.5 Speaker
Speaker is located on the rear side of the display.
Electrical Specifications
Rated impedance
6±15% ohms@2KHz,
1 Vrms input
Power Rating
0.67 W
Short Term Max Power
1.3W
Acoustical Specifications
Sound Pressure Level
75±3dB/40cm@1kHz

17
Chapter 3: Operating the Device
Chapter 3: Operating the Device
The PT Series HMI runs on Android 6.0 operating system (Default).
3.1 Home Screen
Your device runs on Android 6.0 operating system (Default).
Back
Opens the previous screen you were working in, even if it was in a different app.
Once you back up to the Home screen, you can’t go back any further.
Home
Returns to the Home screen. To get suggestions based on the screen you’re
currently viewing, touch & hold this button.
Overview
Opens a list of thumbnail images of screens you’ve worked with recently. To open
one, touch it. To remove a screen from the list, swipe it left or right or touch the X.
Your apps
To see all your apps, touch in the Favorites tray on any Home screen. This is
where you can see all your apps, including those that come with your phone or tablet
and those you downloaded on Google Play. You can move app icons to any of your
Home screens. The apps you’ve used most recently appear in the first row.

18
PT Series Android HMI User Guide
Some apps hide these buttons temporarily, or fade them to small dots in the same
position. To bring them back, touch the dots, touch the screen in the middle, or
swipe up from the bottom.
Many screens in apps and Settings include a menu icon at the top right of the
screen. Touch it to explore additional options, including Help & feedback.
To add an app to a Home screen:
1. Go to the Home screen where you want to place the app.
2. Touch All Apps .
3. Swipe from left to right to find the app you want.
4. Touch & hold the app until the Home screen appears, slide it into place, and
lift your finger.
To remove an app icon from the Home screen without removing it permanently
from your device, touch & hold it, slide your finger toward the top of the screen, and
drop the app over Remove in the top left.
3.2 Quick Settings
You can open your device’s settings app from the All Apps screen or from Quick
Settings.
For example, to change notification sounds, and volume go to Settings > Device
> Sound to change the volume.
Use Quick Settings to easily change frequently used settings, like
turning on Wi-Fi. To open Quick Settings, swipe down from the top
of the screen with two fingers. To change a setting, just touch the
icon:
Display brightness: Slide to lower or increase the
brightness of your screen.
Wi-Fi network: Turn Wi-Fi on or off or open the Wi-Fi
settings menu.
Bluetooth settings: Turn Bluetooth on or off or open the
Bluetooth settings menu.
Auto-rotate: Lock your device’s orientation in portrait or
landscape mode.

19
Chapter 3: Operating the Device
Open the main Settings menu by touching Settings at the top right.

20
PT Series Android HMI User Guide
3.3 Configuring Serial Port Settings
Serial COM Port can be configured for RS-232, RS-422 or RS-485. Winmate
provide COM port settings application for Android OS.
To configure serial port settings:
1. Settings > Accessibility.
2. Accessibility > System: Comport-Setting.