Winmate P-CAP SERIES User manual

Flat Stainless P-CAP
Panel PC
Intel®Core™i5-5200U Broadwell 2.2 GHz (turbo to 2.7 GHz)
Full IP65
User Manual
Version 1.0
Document Part Number: 9152111I101G

ii
IP65 Flat Stainless P-CAP Panel PC
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product, including
circuits and/or software described or contained in this manual in order to improve design
and/or performance. We assume no responsibility or liability for the use of the described
product(s) conveys no license or title under any patent, copyright, or masks work rights to
these products, and make no representations or warranties that these products are free from
patent, copyright, or mask work right infringement, unless otherwise specified. Applications
that are described in this manual are for illustration purposes only. We make no
representation or guarantee that such application will be suitable for the specified use
without further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer discovers
a defect, we will, at his/her option, repair or replace the defective product at no charge to the
customer, provide it is returned during the warranty period of one year, with transportation
charges prepaid. The returned product must be properly packaged in its original packaging to
obtain warranty service. If the serial number and the product shipping data differ by over 30
days, the in-warranty service will be made according to the shipping date. In the serial
numbers the third and fourth two digits give the year of manufacture, and the fifth digit
means the month (e. g., with A for October, B for November and C for December).
For example, the serial number 1W14Axxxxxxxx means October of year 2014.

IP65 Flat Stainless P-CAP Panel PC
iii
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of
our distributor to find the update information about the product. Second, contact with your
distributor, sales representative, or our customer service center for technical support if you
need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are
always ready to give advice on application requirements or specific information on the
installation and operation of any of our products.

iv
IP65 Flat Stainless P-CAP Panel PC
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or to
alert you to the potential for hardware damage or personal injury. These are Notes, Important,
Cautions, and Warnings. The following is an example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and explains how to avoid
the potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et explique
comment éviter le problème potentiel.
WARNING!/ AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical hazards
and how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur des
emplacements électriques et comment éviter ces problèmes.
ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol indicates the potential
risk of serious electrical shock due to improper grounding.
Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à
la terre incorrecte.

IP65 Flat Stainless P-CAP Panel PC
v
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis whenever
you work with the hardware. Do not make connections while the power is
on. Sensitive electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque vous
travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation
est présente. Des composantes électroniques sensibles peuvent être
endommagées par des sauts d’alimentation. Seulement du personnel
expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before touching the CPU
card. Modern electronic devices are very sensitive to static electric charges.
As a safety precaution, use a grounding wrist strap at all times. Place all
electronic components in a static-dissipative surface or static-shielded bag
when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge statique
avant de toucher la carte CPU. Les équipements électroniques moderns sont
très sensibles aux décharges d’électricité statique. Toujours utiliser un
bracelet de mise à la terre comme précaution. Placer toutes les
composantes électroniques sur une surface conçue pour dissiper les charge,
ou dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

vi
IP65 Flat Stainless P-CAP Panel PC
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep this
user manual for future reference.
Always disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.
For pluggable equipment, the power outlet must be installed near the equipment
and must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it
fall could cause damage.
The openings on the enclosure are for air convection and to protect the equipment
from overheating.
CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!
Before connecting the equipment to the power outlet make sure the voltage of the
power source is correct.
Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical shock.
Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
All cautions and warnings on the equipment should be noted.
*Let service personnel to check the equipment in case any of the following problems
appear:
oThe power cord or plug is damaged.
oLiquid has penetrated into the equipment.
oThe equipment has been exposed to moisture.
oThe equipment does not work well or you cannot get it to work according
to the user manual.
oThe equipment has been dropped and damaged.
oThe equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the
equipment.

IP65 Flat Stainless P-CAP Panel PC
vii
CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l’appareil de fixation recommandé pour éliminer le risque de
blessure.
WARNING! / AVERTISSEMENT!
Only use the connection cords that come with the product. When in doubt,
please contact the manufacturer.
Utiliser seulement les cordons d’alimentation fournis avec le produit. Si
vous doutez de leur provenance, contactez le manufacturier.
WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the device.
Toujours vérifier votre mise à la terre afin que l’équipement ne se
décharge pas sur vous.
Cover workstations with approved anti-static material. Use a wrist strap
connected to a work surface and properly grounded tools and equipment.
Use anti-static mats, heel straps, or air ionizer for added protection.
Handle electrostatic-sensitive components, PCB’s and assemblies by the case or
the edge of the board.
Avoid contact with pins, leads, or circuitry.
Turn off power and input signals before inserting and removing connectors or test
equipment.
Keep the work area free of non-conductive materials, such as ordinary plastic
assembly aids and Styrofoam.
Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that
are conductive.
Always put drivers and PCB’s component side on anti-static foam.

viii
IP65 Flat Stainless P-CAP Panel PC
Important Information
Countries/ Area
Symbol
This equipment complies with essential requirements of:
European Union
Electromagnetic Compatibility Directive(2014/30/EU)
Low Voltage Directive (2014/35/EU)
Restrictions of the use of certain hazardous substances
(RoHS) Directive (2011/65/EU)
USA
FCC Part 15 Subpart B Regulations Class B
Federal Communications Commission Radio Frequency Interface Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "B" digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at him own expense.
.

IP65 Flat Stainless P-CAP Panel PC
ix
European Union
This equipment is in conformity with the requirement of the following EU legislations and
harmonized standards. Product also complies with the Council directions.
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

x
IP65 Flat Stainless P-CAP Panel PC
About This User Manual
This User Manual provides information about using the Winmate® IP65 Flat Stainless P-CAP Panel
PC with Intel® Core™ i5-5200U Broadwell 2.2 GHz (turbo to 2.7 GHz) processor. This User Manual
applies to the IP65 Flat Stainless P-CAP Panel PC –R15IH3S-SPC3, R17IH3S-SPA1, R19IH3S-SPM11
and W22IH3S-SPA3.
The documentation set for the IP65 Flat Stainless P-CAP Panel PC provides information for specific
user needs, and includes:
IP65 Flat Stainless P-CAP Panel PC User Manual –contains detailed description on how to
use the Panel PC, its components and features.
IP65 Flat Stainless P-CAP Panel PC Quick Start Guide - contains detailed description on how
to use the Panel PC, its components and features.
NOTE:
Some pictures in this guide are samples and can differ from actual product.
Revision History
Version
Date
Note
1.0
23-Nov-2016
Initial release

IP65 Flat Stainless P-CAP Panel PC
xi
Contents
Preface ................................................................................................................................... ii
About This User Manual.......................................................................................................... x
Chapter 1: Introduction........................................................................................................... 1
1.1 Product Features............................................................................................................. 1
1.2 Package Content .............................................................................................................2
1.3 Connector Placement .....................................................................................................3
1.4 Physical Buttons and LED Indicators...............................................................................4
1.5 Schematics and Dimensions ...........................................................................................5
1.5.2 Dimensions 15".....................................................................................................5
1.5.3 Dimensions 17” ....................................................................................................5
1.5.4 Dimensions 19” ....................................................................................................6
1.5.5 Dimensions 21.5” .................................................................................................6
Chapter 2: Getting Started ...................................................................................................... 8
2.1 Powering On.................................................................................................................... 8
2.1.1 AC Adapter Components......................................................................................8
2.1.2 Power Considerations .......................................................................................... 9
2.1.3 Power Consumption.............................................................................................9
2.1.4 Connecting the Power........................................................................................10
2.2 Connector Pin Assignments ..........................................................................................11
2.2.1 Power Cable........................................................................................................ 11
2.2.2 Serial Cable .........................................................................................................12
2.2.3 Ethernet Cable....................................................................................................13
2.2.4 USB 2.0 Cable .....................................................................................................14
2.3 Turning On and Off .......................................................................................................15
Chapter 3: Operating the Device............................................................................................ 17
3.1 Operating System..........................................................................................................17
3.2 Multi-Touch................................................................................................................... 18
3.3 How to Enable Watchdog .............................................................................................19
Chapter 4: AMI UEFI BIOS Setup ............................................................................................ 22
4.1 How and When to Use BIOS Setup ...............................................................................22
4.2 BIOS Functions .............................................................................................................. 24

xii
IP65 Flat Stainless P-CAP Panel PC
4.2.1 Main Menu .........................................................................................................24
4.2.2 Advanced Settings ..............................................................................................25
4.2.3 Boot Menu..........................................................................................................43
4.2.4 Security Menu ....................................................................................................44
4.2.5 Save & Exit..........................................................................................................45
4.3 Using Recovery Wizard to Restore Computer....................................................... 47
Chapter 5: Driver Installation ................................................................................................ 50
5.1 Chipset Driver................................................................................................................50
5.2 Graphics Driver .............................................................................................................53
5.3 Audio Driver .................................................................................................................. 56
5.4 Ethernet Driver ............................................................................................................. 58
5.5 Intel® Management Engine Software ...........................................................................61
Chapter 6: Mounting Solutions.............................................................................................. 65
6.1 Cable Mounting Considerations ...................................................................................65
6.2 Safety Precautions ........................................................................................................ 66
6.3 Mounting Guide ............................................................................................................67
6.3.1 VESA Mount........................................................................................................ 67
6.3.2 Yoke Mount ........................................................................................................68
Chapter 7: Technical Support ................................................................................................ 70
7.1 Software Developer Support ........................................................................................ 70
7.1.1 Winmate Download Center................................................................................70
7.1.2 Winmate File Share ............................................................................................70
7.2 Problem Report Form ...................................................................................................71
Appendix A: Product Specifications ....................................................................................... 73
Appendix B: Ordering Information ........................................................................................ 76

IP65 Flat Stainless P-CAP Panel PC
1
Introduction
This chapter gives you product overview,
describes features and hardware
specification. You will find all accessories
that come with the device in the packing
list. Mechanical dimensions and drawings
included in this chapter.

User Manual Chapter 1 Introduction
IP65 Flat Stainless P-CAP Panel PC
1
Chapter 1: Introduction
Winmate® IP65 Flat Stainless P-CAP Series Panel PC is rugged, industrial-grade panel PC
series built to withstand challenging environments, undergoing rigorous testing to
ensure safety and top performance. All of the models in the series are sealed to IP65
standard. Stainless housing features anti-corrosion properties making it suitable for food,
chemical and pharmaceutical industries. P-CAP multi-touch screen supports glove mode
and provides even more convenience for the operator.
Winmate® IP65 Flat Stainless P-CAP Panel PC goes beyond that of the standard industrial
panel computers with elegant, edge-to-edge design, rugged construction, powerful
performance, and flexible mounting options.
1.1 Product Features
Winmate® IP65 Flat Stainless P-CAP Panel PC features:
Intel® Core™ i5-5200U Broadwell 2.2 GHz (turbo to 2.7 GHz)
Stainless housing, built to withstand the most demanding industries
Sealed to IP65 for protection against water and dust
A true flat, easy-to-clean front surface with edge-to-edge design
Flat multi-touch panel pc with superior readability and P-CAP technology
Various mounting solutions, Yoke mount and VESA mount
Plenty of I/O s including USB 2.0, RS-232 serial port and RJ45-10/100/1000 LAN
ports
Waterproof ports with adapter cables for external connectivity
Rain/ Glove Mode

2
IP65 Flat Stainless P-CAP Panel PC
1.2 Package Content
Carefully remove the box and unpack your Panel PC. Please check if all the items listed
below are inside your package. If any of these items are missing or damaged contact us
immediately.
Standard factory shipment list
Panel PC
IP65 Flat Stainless P-CAP
Panel PC User Manual
(Hardcopy)
Driver CD & SBC User
Manual
Varies by product
specifications
9152111I101S
IH32:9171111I102F
AC Adapter
Power Cable
Serial Cable
80W 90PO12080003
Varies by destination
94G0103090Q0
Ethernet Cable
USB Cable
VESA Screws
94I0080080KF
9480108080Q0
913511101101

User Manual Chapter 1 Introduction
IP65 Flat Stainless P-CAP Panel PC
3
1.3 Connector Placement
IP65 Flat Stainless P-CAP Series Panel PC has IP65 type connectors with protection cap.
For cable specifications refer to the Ch.2,“Cable Specifications” of this user manual.

4
IP65 Flat Stainless P-CAP Panel PC
1.4 Physical Buttons and LED Indicators
Physical buttons and LED indicators located on the rear side of the Panel PC.
Physical Buttons
Icon
Button
Description
Reset
Press to reset the system
Power On/
Off
Press to power on or power off the device
LED Indicators
LED Type
Status
Description
On
Power is on
Off
Power is off
Blinking
Storage activity (Data is being read or written)
Off
System is idle

User Manual Chapter 1 Introduction
IP65 Flat Stainless P-CAP Panel PC
5
1.5 Schematics and Dimensions
This section contains mechanical drawing of the panel PC. Notice that this is a simplified
drawing and some components are not marked in detail.
1.5.2 Dimensions 15"
Unit: mm
1.5.3 Dimensions 17”
Unit: mm

6
IP65 Flat Stainless P-CAP Panel PC
1.5.4 Dimensions 19”
Unit: mm
1.5.5 Dimensions 21.5”
Unit: mm