Winmate B Series User manual

Please read this instructions before operating the device and retain them for future reference.
IP65 Stainless
B Series Panel PC with Push
Buttons
Intel® Celeron® N2930 (2M Cache, up to 2.16 GHz)
10.1”/ 15”/ 19”/ 21.5”
Model No.W10IB3S-SPH1-B
R15IB3S-SPC3-B
R19IB3S-SPM1-B
W22IB3S-SPA3-B
User Manual
Document Version 1.0
Document Part No. 91521110105V

2
IP65 Stainless B Series Panel PC User Manual
Contents
About This User Manual 7
Chapter 1: Introduction 8
1.1 Overview 8
1.2 Features 8
1.3 Package Content 9
1.4 Product Overview 10
1.5 Front Side USB Type-A Connector 12
1.6 Front Side Push Buttons 13
1.7 Rotary Switch for Touch Mode 13
1.8 Rear Side Physical Buttons 14
1.9 LED Indicators 15
Chapter 2: Installation 16
2.1 Mounting 16
2.1.1 VESA Mount 16
2.1.2 Yoke Mount 17
2.2 Connecting Peripherals 17
2.2.1 Power Connector 18
2.2.2 LAN Connector 18
2.2.3 USB Connector 19
2.2.4 USB Type-A Connector 19
2.2.5 RS-232 Connector 20
2.2.6 Connector 1 for Push Button Extension 20
2.2.7 Connector 2 for Push Button Extension 21
2.3 Cleaning the Monitor 21
Chapter 3: Operating the Device 22
3.1 Connecting to Power Source 22
3.2 Turning On/ Off the Device 23
3.3 Emergency Stop 23
3.4 Operating System 23
3.5 Multi-Touch 24
3.6 How to Enable Watchdog 25
Chapter 4: AMI BIOS Setup 26
4.2.1 Main Menu 27
4.2.2 Advanced Menu 28
4.2.3 Chipset Menu 45
4.2.4 Security Menu 46
4.2.5 Boot Configuration 47
4.2.6 Save & Exit 48

3
About This User Manual
4.2.7 Using Recovery Wizard to Restore Computer 50
Chapter 5: Driver Installation 51
5.1 Installing Chipset Driver 51
5.2 Installing Graphics Driver 53
5.3 Installing Intel Sideband Fabric Device Driver 54
5.4 Installing Intel Trusted Engine Interface Driver 55
5.5 Installing Intel Network Connections 56
5.6 Installing Audio Driver 57
Chapter 6: Maintenance and Troubleshooting 58
6.1 Cleaning the Monitor 58
6.2 Basic Troubleshooting 58
Appendix 59
Appendix A: Hardware Specifications 59
Appendix B: Winmate Software Development Kit 61

4
IP65 Stainless B Series Panel PC User Manual
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "B" digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at him own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
This equipment is in conformity with the requirement of the following EU legislations and
harmonized standards. Product also complies with the Council directions.

5
About This User Manual
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or
by any means, electronic or mechanical, for any purpose, without the prior written permission
of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product, including
circuits and/or software described or contained in this manual in order to improve design
and/or performance. We assume no responsibility or liability for the use of the described
product(s) conveys no license or title under any patent, copyright, or masks work rights to
these products, and make no representations or warranties that these products are free from
patent, copyright, or mask work right infringement, unless otherwise specified. Applications
that are described in this manual are for illustration purposes only. We make no representation
or guarantee that such application will be suitable for the specified use without further testing
or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer discovers
a defect, we will, at his/her option, repair or replace the defective product at no charge to the
customer, provide it is returned during the warranty period of one year, with transportation
charges prepaid. The returned product must be properly packaged in its original packaging to
obtain warranty service. If the serial number and the product shipping data differ by over 30
days, the in-warranty service will be made according to the shipping date. In the serial
numbers the third and fourth two digits give the year of manufacture, and the fifth digit means
the month (e. g., with A for October, B for November and C for December).
For example, the serial number 1W19Axxxxxxxx means October of year 2019.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of
our distributor to find the update information about the product. Second, contact with your
distributor, sales representative, or our customer service center for technical support if you
need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are
always ready to give advice on application requirements or specific information on the
installation and operation of any of our products.

6
IP65 Stainless B Series Panel PC User Manual
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or
to alert you to the potential for hardware damage or personal injury. These are Notes,
Important, Cautions, and Warnings. The following is an example of each type of advisory.
Note:
A note is used to emphasize helpful information
Important:
An important note indicates information that is important for you to know.
Caution A Caution alert indicates potential damage to hardware and explains
how to avoid the potential problem.
Attention Une alerte d’attention indique un dommage possible à l’équipement
et explique comment éviter le problème potentiel.
Warning! An Electrical Shock Warning indicates the potential harm from
electrical hazards and how to avoid the potential problem.
Avertissement! Un Avertissement de Choc Électrique indique le potentiel de
chocs sur des emplacements électriques et comment éviter ces problèmes.
Safety Information
Warning! Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should open the PC chassis.
Avertissement ! Toujours débrancher le cordon d’alimentation du chassis
lorsque vous travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques sensibles peuvent
être endommagées par des sauts d’alimentation. Seulement du personnel
expérimenté devrait ouvrir ces chassis.
Caution Always ground yourself to remove any static charge before touching
the CPU card. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times. Place
all electronic components in a static-dissipative surface or static-shielded bag
when they are not in the chassis.
Attention Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements électroniques
moderns sont très sensibles aux décharges d’électricité statique. Toujours
utiliser un bracelet de mise à la terre comme précaution. Placer toutes les
composantes électroniques sur une surface conçue pour dissiper les charge, ou
dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.
Alternating Current ! The Protective Conductor Terminal (Earth Ground)
symbol indicates the potential risk of serious electrical shock due to improper
grounding.
Mise à le terre ! Le symbole de Mise à Terre indique le risqué potential de
choc électrique grave à la terre incorrecte.

7
About This User Manual
About This User Manual
This User Manual provides information about using the Winmate® IP65 Stainless B Series
Panel PC with Push Buttons powered by Intel® Celeron® N2930 (2M Cache, up to 2.16 GHz)
processor. This User Manual applies to the IP65 Stainless B Series Panel PC with Push
Buttons –W10IB3S-SPH1-B, R15IB3S-SPC3-B, R19IB3S-SPM1-B, and W22IB3S-SPA3-B.
The documentation set for the IP65 Stainless B Series Panel PC with Push Buttons provides
information for specific user needs, and includes:
User Manual –contains detailed description on how to use the Panel PC, its
components and features.
Quick Start Guide - contains detailed description on how to use the Panel PC, its
components and features.
Note:
Some pictures in this guide are samples and can differ from actual product.
Document Revision History
Version
Date
Note
1.0
20-Jan-2020
New document release.

8
IP65 Stainless B Series Panel PC User Manual
Chapter 1: Introduction
1.1 Overview
Congratulations on purchasing Winmate® IP65 Stainless B Series Panel PC.
Winmate B Series Display features SUS 316/ AISI 316 stainless steel corrosion resistant
housing and big mechanical push buttons on the front. Push-buttons bring control and
indication directly to the work area, eliminating wasted movement and increasing productivity.
In addition, the physical buttons are especially needed for critical tasks like emergency
shutdowns. When an emergency situation occurs, we don’t want to waste time navigating
through HMI screens but a simple and quick way to shut down the process. In terms of
machine integration, push-button devices are easy to install and wire, and straightforward for
understanding the function and use. Averagely the wiring time is saved by over 60%, and the
installation cost is reduced by more than 30%.
1.2 Features
The IP65 Stainless B Series Panel PC features:
10.1”/ 15/ 19/ 21.5” LCD with projected capacitive multitouch screen
Intel® Celeron® N2930 (2M Cache, up to 2.16 GHz)
Fanless cooling system
SUS 316/ AISI 316 stainless steel for food and chemical industries
Full IP65 waterproof enclosure, good corrosion resistance
A true flat, easy-to-clean front surface with edge-to-edge design
Supports VESA mount
Rotary switch adjust different touch mode for Hand/Rain/Glove application
Optional Wi-Fi
Emergency and flat buttons for automation device control

9
Chapter 1: Introduction
1.3 Package Content
Carefully remove the box and unpack your device. Please check if all the items listed below
are inside your package. If any of these items are missing or damaged contact us immediately.
Default:
Panel PC
Quick Start
Guide
(Hardcopy)
Driver CD
AC to DC Adapter
100~240V/ 50W
with Waterproof
Connector
Power Cord
Varies by product
specifications
Part No.
91521110105S
Part No.
917111101104
50W Part No.
90PO12050006 (For
10.1”), 84W Part No.
90PO12084000 (15” up)
Varies by country
External USB
Cable with
Waterproof
Connector
External VGA
Cable with
Waterproof
Connector
External USB
& LAN Cable
with
Waterproof
Connector
External COM
Cable with
Waterproof
Connector
External
Cables for
CN1 & CN2
with
Waterproof
Connector
Part No.
9480128080K0
Part No.
94I0080080KF
Part No.
94E0128040K0
(for 10.1”)
Part No. 94G0123090Q0
Part No.
94E012L120K1
Waterproof
Caps
RJ45 Female to
Female
Converter
• VESA Screws
Part No.
60Y031001001
Part No.
60L0A8400000
Part No.
913511101101
Optional:
External HDMI
Cable with
Waterproof
Connector
Yoke Mount
Stand Kit
Part No.
9490191190K0

10
IP65 Stainless B Series Panel PC User Manual
1.4 Product Overview
This section contains mechanical drawing of the IP65 Stainless B Series Panel PC with Push
Buttons. Notice that this is a simplified drawing and some components are not marked in detail.
10.1”, W10IB3S-SPH1-B Unit: mm
Dimensions: 293 x 250 x 69 mm
№
Description
№
Description
①
USB & LAN
④
CN1
②
COM
⑤
CN2
③
Power

11
Chapter 1: Introduction
15”, R15IB3S-SPC3-B Unit: mm
Dimensions: 426 x 301 x 69 mm
№
Description
№
Description
①
USB x 2
④
CN2
②
COM
⑤
LAN
③
CN1
⑥
Power
19”, R19IB3S-SPM1-B Unit: mm
Dimensions: 516 x 395 x 69 mm

12
IP65 Stainless B Series Panel PC User Manual
№
Description
№
Description
①
USB x 2
④
CN2
②
COM
⑤
LAN
③
CN1
⑥
Power
21.5”, W22IB3S-SPA3-B Unit: mm
Dimensions: 595 x 337 x 69 mm
№
Description
№
Description
①
USB x 2
④
CN2
②
COM
⑤
LAN
③
CN1
⑥
Power
1.5 Front Side USB Type-A Connector
The B Series Panel PC 15” up has one waterproof USB Type-A connector on the front side.

13
Chapter 1: Introduction
1.6 Front Side Push Buttons
The B Series Panel PC features mechanical push buttons located on the front side of the
Panel PC.
15” up
10.1”
№
Button
Description
1
Emergency Shut Down
Press to shut down the system. Pressing this button
stops all operations immediately (motors, valve, etc.).
Emergency stop conditions shall be hard wired,
withdraw power from everything.
2
Programmable
Function Keys
Three programmable function keys, functions to be
defined by customer.
1.7 Rotary Switch for Touch Mode
The IP65 Stainless B Series Panel PC features rotary switch for quick changing a touch
mode located on the front side of the Panel PC. Use rotary switch located in front to switch
between modes.
15” up
10.1”

14
IP65 Stainless B Series Panel PC User Manual
Mode
Description
Hand (Default)
In Hand mode the touchscreen accepts touch inputs from bare
fingertips.
Supports input by:
Rubber tip passive stylus
Bare fingertips
Rain
In Rain mode the touchscreen rejects false inputs from liquid drops.
When the liquid is removed, the touchscreen accepts touch inputs from
bare fingertips.
Supports input by:
Rubber tip passive stylus
Bare fingertips
Glove
In Glove mode, the touchscreen supports inputs while the user is
operating the touchscreen with gloves on.
Supports input by:
Glove
Rubber tip passive stylus
Bare fingertips
1.8 Rear Side Physical Buttons
Physical buttons are located on the OSD panel at the rear side of the Panel PC.
Button
Function
Description
Reset
Press to reset the system
Power On/ Off
Press to power on or power off the
device

15
Chapter 1: Introduction
1.9 LED Indicators
LED indicators are located on the OSD panel at the rear side of the Panel PC.
LED Indicator
Status
Description
On
Power is on
Off
Power is off
Blinking
Stan by
Off
Normal

16
IP65 Stainless B Series Panel PC User Manual
Chapter 2: Installation
Follow this quick installation procedure:
1. Mount your Panel PC according to your application requirements (VESA, Yoke).
2. Connect all the cables to the Panel PC.
3. Use waterproof caps to cover all not used connectors.
4. To ensure enclosure rating protection make sure the cables is firmly fixed and tightened.
Caution Use waterproof cables to ensure the IP65 rating.
Attention. Utilisez des câbles étanches pour garantir l'indice IP65.
Caution When not in use, cover connector with waterproof cap.
Attention Lorsqu'il n'est pas utilisé, couvrez le connecteur avec un capuchon
étanche.
2.1 Mounting
The IP65 Stainless B Series Panel PC devices come with different mounting options suitable
for most of the industrial and commercial applications.
2.1.1 VESA Mount
The Panel PC has VESA mount holes on the rear side. Follow instructions below to mount the
unit with VESA Mount bracket (not supplied by Winmate).
Size
VESA Plate Dimensions
Screw Hole Diameter
10.1”
75 x 75 mm
VESA M4x5 mm
15”, 19”
100 x 100 mm
VESA M4x5 mm
21.5”
200 x 100 mm
VESA M4x5 mm
Installation Instruction
1. Screw VESA bracket to the fixture (ex. swing arm) with four VESA screws.
2. Place the device on VESA bracket.

17
Chapter 2: Installation
2.1.2 Yoke Mount
Yoke Mount solution allows installing the Panel PC on the yoke stand (not supplied by
Winmate).
Installation Instruction
1. Place the Panel PC on the bracket stand, aiming screw holes for each other.
2. Secure screws to fix the device upon the bracket stand.
3. Firmly secure the locking handle to the Panel PC.
2.2 Connecting Peripherals
This B Series Panel PC has waterproof connectors with protection caps: M12 power connector,
M12 GigaLAN connector, M12 RS232 connector, M12 USB connector, two M12 connectors for
push button extension and one waterproof connector USB2.0 type-A (15” up). The pin
assignment of the connectors is described in this section.
Important: To maintain the IP65 rating of the full unit it is recommended to
use only IP65 waterproof cables. You must remember to firmly close all
protective caps when connector is not used.
Note:
Notice that input and output connectors vary by product size and
specifications.

18
IP65 Stainless B Series Panel PC User Manual
2.2.1 Power Connector
By default the B Series Panel PC has one M12 waterproof power connector that accepts 12V
DC power input based on your order.
Power Cable
2.2.2 LAN Connector
The B Series Panel PC has one M12 connector for GigaLAN. Use waterproof LAN cable to
connect the Panel PC to the Internet.
LAN Cable

19
Chapter 2: Installation
2.2.3 USB Connector
The B Series Panel PC has one M12 waterproof connector for touch screen control. Use
waterproof USB cable to connect Panel PC to external peripherals such as mouse or keyboard.
USB Cable
2.2.4 USB Type-A Connector
The B Series Panel PC 15”/ 19”/ 21.5” has one waterproof USB Type-A connector located on
the front side.
Pin assignment and signal name of USB 2.0 connector for optional touch.
Pin №
Signal Name
Pin №
Signal Name
1
+5V
2
Data-
3
Data+
4
GND

20
IP65 Stainless B Series Panel PC User Manual
2.2.5 RS-232 Connector
The B Series Panel PC has one M12 connector for RS-232. Use waterproof USB cable to
connect Panel PC to external peripherals such as printer or keyboard.
RS-232 Cable
2.2.6 Connector 1 for Push Button Extension
Push Button Extension Cable for Connector 1