Winners Only BTP1001K User manual

Page 1 of 3
WINNERS ONLYR
ASSEMBLY INSTRUCTIONS
Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury. Therefore, for your
protection, please remove any exposed staples used in packing.
Please keep all hardware parts out of the reach of children.
1. We recommend that you should assemble this product with the assistance of another person; this will make assembly easier and will help to
eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly purchased product
correctly and efficiently.
PROD.NO :BTG/BTH/BTP1001K

WINNERS ONLYR
ASSEMBLY INSTRUCTIONS
Page 2 of 3
STEP 3: Attach both Bed Rails (F) to the Headboard
assembly (A,B,D&C) using the provided hardware as
shown on FIG.3
STEP 3: Attach both Bed Rails (F) to the Footboard (E)
using the provided hardware as shown on FIG.4
STEP 2: Attach the Headboard (C) to the Legs
assembly (A,B&D) using provided hardware as
shown on FIG.2
PROD.NO : BTG/BTH/BTP1001K

Page 3 of 3
WINNERS ONLYR
ASSEMBLY INSTRUCTIONS
Assembly is now completed.
STEP 5: Attach Support Legs (H) to Slats (G)as shown on FIG.5.
STEP 6: Attach Slats with Support legs (G&H) to the Side Rail
(F) using the provided hardware as shown on FIG.6
PROD.NO : BTG/BTH/BTP1001K