Wize DSD63 User manual

1DSD63-0001
! !
WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM
IMPROPER INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS BEFORE
BEGINNING.
Do not use this product for any purpose not explicitly specied by Crimson AV. Improper installa-
tion may cause property damage or personal injury. If you do not understand these directions, or
have doubts about the safety of the installation, contact Crimson AV Customer Service or call a
qualied contractor. Crimson AV is not liable for damage or injury caused by incorrect mounting,
assembly, or use.
The hardware provided with this product, is exclusively intended for installation on walls made of
solid wood, concrete, concrete block or solid wood columns with a maximum of 16 mm of drywall.
For walls made of other materials, for example hollow bricks, please consult your installer and/
or specialist supplier.
DO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT
WARNING! AVERTISSEMENT! SI CE PRODUIT N’EST PAS CORRECTEMENT INSTALLÉ OU ASSEMBLÉ, IL
RISQUE DE CAUSER DES BLESSURES RAVES, VOIRE MORTELLES, AINSI QUE DES DOM-
MAGES MATÉRIELS IMPORTANTS. AVANT DE COMMENCER, LISEZ LES AVERTISSEMENTS
SUIVANTS.
N’utilisez pas ce produit à une n non spéciée expressément par Crimson AV. Une installation
incorrecte peut entraîner des préjudices corporels ou des dommages matériels. Si vous ne com-
prenez pas ces instructions ou si vous avez des doutes quant à la sécurité de l’installation, veuillez
contacter le service clientèle de Crimson AV ou un installateur qualié. Crimson AV n’est pas re-
sponsable des dommages ou des préjudices causés par un montage, un assemblage ou une
utilisation incorrects.
Le matériel fourni avec ce produit, est exclusivement destiné à être installé sur des murs en bois
massif, en béton, blocs de béton ou des colonnes en bois massif avec un maximum de 16 mm de
plaques de plâtre. Pour les murs faits d’autres matériaux, comme la brique creuse, s’il vous plaît
consulter votre installateur et / ou fournisseur spécialisé.
NE DÉPASSEZ JAMAIS LA CAPACITÉ DE CHARGE MAXIMALE DE CE PRODUIT.
AVERTISSEMENT
ВНИМАНИЕ!
ВНИМАНИЕ! ТРАВМА И ПОВРЕЖДЕНИЕ ОБОРУДОВАНИЯ МОЖЕТ ПРОИЗОЙТИ ОТ
НЕПРАВИЛЬНОЙ УСТАНОВКИ ИЛИ СБОРКИ. ОЗНАКОМЬТЕСЬ СО СЛЕДУЮЩИМИ
ПРЕДУПРЕЖДЕНИЯМИ ПЕРЕД НАЧАЛОМ.
Компоненты, входящие в этот продукт, предназначен для установки на стенах из цельного
дерева, бетона или бетонных блоков. Для стен из других материалов, таких как кирпич,
пожалуйста, проконсультируйтесь с вашим инсталлятором и / или специалиста поставщика.
НЕ ПРЕВЫШАЙТЕ МАКСИМАЛЬНЫЙ ВЕС, УКАЗАННЫЙ В ИНСТРУКЦИИ
Manuel D’instructions
Instruction Manual
Dual back to back Screen Ceiling Mounted System
For 37”-65” TVs / Weight Capacity: 600 lb
DSD63
Инструкция
www.wize-av.com [email protected]

2
Component List for DSD63: Two Sets Required
DSD63-001
C (8)
Extenders
M4 / M5 Spacer
R (8)
M6 / M8 Spacer
S (8)
M4 x 12mm
F (8)
M8 x 40mm
P (8)
M5 x 30mm
I (8)
M6 x 12mm
J (8)
M6 x 20mm
K (8)
M6 x 25mm
L (8)
M6 x 30mm
M(8)
M8 x 16mm
N (8)
M8 x 25mm
O (8)
M5 x 10mm
E (36)
M4 x 30mm
G(8)
Multiwasher
V (8)
M8 Washer
U (16)
M8 POM Washer
Y (4)
M8 x 10mm
T (4)
M5 x 12mm
H (8)
D
Retaining collar
DD (2)
Set screws
M10 x 15mm
Q (8)
!
WEIGHT CAPACITY
600lb / 274kg
CAUTION!
TOOLS REQUIRED
Необходимые Инструменты Outils nécessaires
Maximum Weight Capacity
Максимальный вес
Poids maximal de l’écran
PACKAGE CONTENTS
Входит в комплект Contenu de l’emballage

3DSD63-0001
B (2)
Mount bracket
DD (1)
3mm Allen wrench
CC (2)
2.5mm Allen wrench
A
Horizontal Assembly
INSTALLATION INSTRUCTIONS
Инструкция Instructions d’installation
OR
O
OU
(EE)
(DD)
(II)
(HH)
OR
o
ou
(FF)
(GG)
Slide column (A) into column (AA). Adjust to desired length. Lock into place with securing screws.
Вставьте часть штанги (А) в штангу (AA). Отрегулируйте до нужной длины. Зафиксируйте на место с
крепежными винтами.
Se glisser la colonne (A) dans la colonne (AA). Ajuster à la longueur désirée. Lock en place avec des vis.
1 ASSEMBLE ADJUSTMENT COLUMN
A
AA
1-21-1
1-3
PACKAGE CONTENTS
Входит в комплект Contenu de l’emballage

4DSD63-001
Cоедините обе части штангис помощью разъема EC1.
2
Thread EC1 onto adjustable column followed by threading static column into EC1. Secure
with set screws.
EC1 letage sur la colonne réglable suivie en enlant colonne statique dans EC1. Fixez
avec des vis xées.
1a-1 ASSEMBLY INSTALLATION
1a-1
Присоединить часть (С) на конце штанги и затем часть ES1. Отрегулируйте ES1
на нужную высоту и закрепите на месте с помощью винтов. Примечание: часть
(С) будет опираться на ES1.
Slide ceiling mount box (C) onto end of column followed by ES1 (). Adjust ES1 to desired
height and secure into place with set screws. Note: Ceiling mount box will rest on ES1.
Faites glisser l’assemblage (C) sur l’extrémité du tuyau d’extension suivie ES1 (). Réglez ES1 à la
hauteur désirée et xer en place avec vis de xation.
2ASSEMBLY INSTALLATION

5DSD63-0001
3
Cоедините части штанги с помощью разъема EC1. Присоединить часть (С)
на конце штанги и прикрепите большой гайкой.
Thread EC1 onto column followed by threading column into EC1. Slide ceiling mount box
(C) onto end of column followed by retaining collar. Secure with set screws.
EC1 letage sur la colonne suivie en enlant colonne dans EC1. Faites glisser l’assemblage (C)
sur l’extrémité du tuyau d’extension suivie conservant collier (D). Fixez avec des vis xées.
3 ASSEMBLY INSTALLATION
4
Rotate ceiling mount boxes to desired position.
Поверните сборку в нужное положение.
Tournez plafond de montage boîte à la position désirée.
ASSEMBLY INSTALLATION
4

6
5-3 ATTACH MOUNT BRACKET
Fasten using supplied hardware with a screwdriver. Hand tools only.
Закрепите винтами включены в комплект, с помощью отвертки. Tолько pучные
инструменты.
Fixer à l’aide de matériel fourni avec un tournevis. Outils à main seulement.
If necessary, add bracket extension (EE) and secure with screws (Z).
При необходимости добавьте скобку (EE) и закрепите с помощью винтов (Z).
Si nécessaire, ajouter des extension à l’appui (EE) et la vis (Z).
ATTACH UNIVERSAL MOUNT BRACKET5-1
5-1
ATTACH UNIVERSAL MOUNT BRACKET5-2
5-2
Align mount bracket (E) to holes on back of TV. After bracket is in position, use supplied allen wrench (CC) to
tighten holding screws. Make sure adapter is centered and X is equal distance on both sides.
Совместите адаптер (E) с отверстиями на задней части телевизора. После установки адаптера,
используйте поставляемый гаечный ключ (CC), чтобы затянуть крепежные винты. Убедитесь, что
адаптер по центру и расстояние X одинаковое с обоих сторон.
4-holding screws
3mm
Allen Wrench
(X)
Aligner le support de montage (E) pour les trous à l’arrière du téléviseur. Après le support de xation est en
position, utilisez la clé Allen (CC) pour serrer les vis. Assurez-vous que le pouvoir est concentré et X est la
même distance des deux côtés.
If screws (F-M) are needed use multi-washer (V).
Если винты (F-M) необходимы, используйте специальные шайбы (V).
Si les vis (F-M) sont nécessaires, puis utilisez multi-rondelle (V).
ATTACH MOUNT BRACKET5-4
5-4
Multi-washer
(V)
Screws
(F-M)
5-3
Screws
(N-P)
DO NOT USE
Multi-washer
DSD63-001

7
5-6
5-5
Spacer
R or S
If screws bottom out use washers (not included) to eliminate slack.
Если винт дойдет до нижнего предела, используйте шайбы (не включены) для
устранения провисания.
Si les vis touché le fond, puis utiliser des rondelles (non inclus) an d’éliminer mou.
ATTACH MOUNT BRACKET5-6
!
5-5 ATTACH MOUNT BRACKET
Use spacers (R / S) between TV and mount if needed.
Используйте прокладки (R / S) между пластиной и телевизором, если это
необходимо.
Utiliser des entretoises (R / S) entre le téléviseur et le support métallique si nécessaire.
6-1
Hang TV on to horizontal assembly. Make sure that the bushings on the universal mount
bracket are seated properly on the adapter plate. Secure with screws and washers (T and Y).
Повесьте телевизор на адаптер. Убедитесь, что алюминиевые втулки
кронштейна сидят правильно на адаптерe.
Hang TV sur la plaque adaptatrice. Assurez-vous que les traversées alminum sur le
support de montage universel sont assis correctement sur la plaque adaptatrice.
6-1 HANG TV
Y
T
DSD63-0001

8
If needed, perform vertical micro-adjustments. Note: If vertical adjustment is in the all the
way down position, it may be necessary to adjust TV up in order to remove TV.
При необходимости, повернуте винт отрегулировать микро-регулировку. Примечание:
Если механизм для вертикальной микро-регулировки находится в самом нижнем
положении, необходимо будет установить ТВ на более высокое положение, чтобы снять
телевизор с кронштейнa.
Si nécessaire, ne vertical micro-ajustements. Note: Si le réglage vertical est dans le tout le
long de position, il peut être nécessaire d’ajuster téléviseur, an de supprimer TV.
6-3 VERTICAL MICRO-ADJUSTMENTS
6-4
Adjust tilt to desired position. Tighten knob with the short wrench (AA) to lock into place.
Отрегулируйте наклон в желаемом положении. При необходимости, затяните
ручку гаечным ключом (AA), чтобы зафиксировать на месте.
Réglez l’inclinaison. Serrez avec la clé (AA) pour verrouiller en place.
ADJUST TILT6-4
To hang TV in portrait mode, remove nut, bushing, and washer from section 1 and
place in section 2. Repeat steps 2-3.
Чтобы повесить телевизор в портретном режиме, удалите гайку, втулку и шайбу с
позиции 1 и переместите иа позицию 2. Повторите шаги 3-4.
Pour accrocher la TV en mode portrait, retirez l’écrou, la bague et la rondelle de
l’article 1 et le lieu de l’article 2. Répétez les étapes 2-3.
7 PORTRAIT MODE
7
6-2
6-3
Level TV to desired position then tighten screws (T). Hand tools only.
Отрегулируйте горизонтальный уровень ТВ в желаемом положении, затем
затяните винты.
Niveau TV à la position désirée puis serrer les vis de xation (T). Outils à main seulement.
LEVEL AND SECURE TV6-2
DSD63-001

9
Congratulations on the purchase of this Wize product! The product you now have in your possession
is made of durable materials and is based on a design, every detail of which has been meticulously
thought-out. That is why Wize products are covered by a 10-year warranty against defects in materi-
als or manufacturing.
Wize disclaims any liability for modications, improper installations, or installations over the speci-
ed weight range. To the maximum extent permitted by law, Wize disclaims any other warranties,
expressed or implied, including warranties of tness for a particular purpose and warranties of
merchantability. Wize will not be liable for any damages arising out of the use of, or inability to use,
Wize products. Wize bears no responsibility for incidental or consequential damages. This includes,
but is not limited to, any labor charges for the repair of Wize products performed by anyone other
than Wize.
Specications are subject to change without prior notice.
WARRANTY
Nous vous félicitons pour l’achat de ce produit Wize! Vous venez d’acquérir un produit
réalisé à partir de matériaux durables et d’une conception ingénieuse jusque dans les
moindres détails. Wize est ainsi en mesure de garantir ses produits pendant 10 ans contre
les défauts de matériaux et de fabrication.
Wize rejette toute responsabilité relativement à quelque problème pouvant être asso-
cié à une modication d’un produit, à une mauvaise installation ou à une installation ne
respectant pas les limites de charge. Sous réserve des lois en vigueur, Wize réfute toute
autre garantie expresse ou implicite, notamment toute garantie de commercialisation
ou de convenance à un usage quelconque. Wize réfute toute responsabilité pour des
dommages résultant de l’utilisation ou de l’impossibilité d’utiliser des produits Wize. Wize
réfute également toute responsabilité pour quelque dommage accessoire ou indirect. Ceci
s’applique notamment aux frais de main d’oeuvre pour la réparation de produits Wize par
une personne ne travaillant pas pour Wize.
Les spécications sont sujettes à changement sans préavis.
GARANTIE
ГАРАНТИЯ
Благодарим вас за покупку данного продукта Wize! Этот продукт изготовлен из
прочных материалов и основан на дизайне, каждая деталь которого была тщательно
продумана. Продукты Wize обеспечены 10-летней гарантией от дефектов в производстве.
ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ МОГУТ БЫТЬ ИЗМЕНЕНЫ БЕЗ
ПРЕДВАРИТЕЛЬНОГО УВЕДОМЛЕНИЯ.
DSD63-0001
www.wize-av.com
Table of contents
Other Wize TV Mount manuals
Popular TV Mount manuals by other brands

peerless-AV
peerless-AV ACC-DSV503 Installation and assembly

Whelen Engineering Company
Whelen Engineering Company SAK37 installation guide

Vivo
Vivo MOUNT-V101G1/W instruction manual

Helios
Helios LP64PL Assembly instructions

Bretford
Bretford MSB-W4 Assembly instructions

Gembird
Gembird WM-U30-01-W user manual

Allen-Bradley
Allen-Bradley 140G Series quick start guide

Whelen Engineering Company
Whelen Engineering Company SAK60 installation guide

Premier Mounts
Premier Mounts PaneLock brochure

Manhattan
Manhattan 423786 install guide

Blichmann Engineering
Blichmann Engineering HopRocket Assembly operation maintenance

Vizio
Vizio XMT1200MS user manual