Wiznet WIZ610wi User manual

-
1 -
WIZ610wi User’s Manual
( Version 1.9.1 )
©2009 WIZnet Co., Ltd. All Rights Reserved.
☞ For more information, visit our website at http://www.wiznet.co.kr

WIZ610wi User’s Manual (WIZnet Co.,Ltd)
- 2 -
Upgrade History
Date Version Comment
2009-01-31 V1.0 Release
2009-03-16 V1.1 -Gateway mode 8080 port access added
-Client mode WAN setting added
-Serial Packing Condition added
-Serial Command added
2009-05-18 V.1.2 -Client mode IP setting amended
-Power Consumption fact amended
-IGMP function added
-Server connection trying interval function added on
the serial client mode.
-Data Packet ConditionTime(SecondÆMillisecond)
2009-06-18 V.1.3 -Serial Command Added
2009-07-14 V.1.4 -Serial Command Amended
2009-08-11 V.1.5 -Serial Command Added
Server-Client connection status checking
-Reference Schematic Amended(Pin No. 6, 7)
2009-10-30 V.1.6 -Pin description (table 9) Amended.
GPIO7 -> nRS232_LED
-Reference Schematic Amended (Pin No. 5)
-Wizard Program introduction Added
2010-03-09 V.1.7 -Serial Command Added
*Socket Connection Status Checking
*TCP Server setup(IP address or Domain Name)
-SSL module added
-Default SSID is changed to ‘WLANAP’
-Serial to WiFi Reference schematic Added
2010-08-03 V.1.8 -Serial command amended
2010-12-01 V.1.9 -Serial command modified & amended
-Serial max baud rate modified (Max 921,600bps)
-Temperature specification modified
-Aging test report added.
2011-01-25 V.1.9.1 -Pin pitch information added at Fig.36

WIZ610wi User’s Manual (WIZnet Co.,Ltd)
- 3 -
WIZnet’s Online Technical Support
If you have any questions about our products, please visit our website and submit
your questions on the Q&A Board. We will reply your questions as soon as possible
COPYRIGHT NOTICE
Copyright 2009 WIZnet Co., Ltd. All Rights Reserved.
Technical Support: suppor[email protected]
Sales & Distribution: [email protected]
For more information, visit our website at http://www.wiznet.co.kr

WIZ610wi User’s Manual (WIZnet Co.,Ltd)
- 4 -
Contents
1. Introduction .............................................................................................................................................................. 1
1.1 Product Specification................................................................................................................................. 3
1.1.1 WIZ610wi Module .......................................................................................................................... 3
1.1.2 WIZ610wi Test Board .................................................................................................................... 5
2. Getting Started ........................................................................................................................................................ 6
2.1. Hardware Installation ............................................................................................................................... 6
2.2. Configuration ............................................................................................................................................... 7
2.2.1 Wizard Program .............................................................................................................................. 7
2.2.2 Connecting the Web page of WIZ610wi ........................................................................... 10
2.2.3 Checking Status ............................................................................................................................ 11
2.2.4 Network Setting ........................................................................................................................... 13
2.2.5. Wireless Setting .......................................................................................................................... 15
2.2.5.1. Mode Selection ............................................................................................................... 15
2.2.5.2. IP Configuration in Each Mode ................................................................................ 16
2.2.5.3. Access Point Setup ........................................................................................................ 18
2.2.5.4. Gateway Setup ................................................................................................................ 24
2.2.5.5. Client Setup ...................................................................................................................... 27
2.2.6. Serial Setting ................................................................................................................................ 29
2.2.7. Security Setup .............................................................................................................................. 33
2.2.8. Others .............................................................................................................................................. 33
2.2.8.1. Password ............................................................................................................................ 33
2.2.8.2. Log ....................................................................................................................................... 34
2.2.8.3. Upgrade ............................................................................................................................. 34
2.2.8.4 Factory Default ................................................................................................................. 35
2.2.8.5. Reboot ................................................................................................................................ 37
3. Pin Assignment and Module Size ................................................................................................................ 38
4. Demonstration and Test ................................................................................................................................... 41
5. Serial Configuration ............................................................................................................................................ 45
6. Reference Schematics ........................................................................................................................................ 62
6.1 WIZ610wi Module Pin assign ............................................................................................................. 62
6.2 External PHY interface using MII ....................................................................................................... 63
6.3 RS-232C interface .................................................................................................................................... 64
6.4 Serial to WiFi interface .......................................................................................................................... 65

WIZ610wi User’s Manual (WIZnet Co.,Ltd)
- 5 -
7. Aging test report ................................................................................................................................................. 66
7.1 Test environment ...................................................................................................................................... 66
7.2 Test condition ............................................................................................................................................ 66
7.3 Test result .................................................................................................................................................... 67

WIZ610wi User’s Manual (WIZnet Co.,Ltd)
- 6 -
Figures
FIGURE 1. WIZ610WI TEST BOARD ............................................................................................................................... 5
FIGURE 2. WIZ610WI WIZARD PROGRAM ................................................................................................................... 7
FIGURE 3. WIZ610WI TELNET WINDOW ...................................................................................................................... 8
FIGURE 4. WIZ610WI WIZARD PROGRAM ................................................................................................................... 8
FIGURE 5. WIZ610WI WIZARD PROGRAM ................................................................................................................... 9
FIGURE 6. CONNECTING TO THE WEB PAGE OF WIZ610WI .................................................................................... 10
FIGURE 7. INPUT ID & PASSWORD ............................................................................................................................. 10
FIGURE 8. SYSTEM DATA ............................................................................................................................................... 11
FIGURE 9. ACTIVE CLIENTS ........................................................................................................................................... 12
FIGURE 10. NETWORK SETTING ................................................................................................................................... 13
FIGURE 11. ACTIVE DHCP CLIENT TABLE .................................................................................................................. 14
FIGURE 12. OPERATION MODE .................................................................................................................................... 15
FIGURE 13. CHANGING OPERATION MODE ............................................................................................................... 15
FIGURE 14. ACCESS POINT MODE - 1 ....................................................................................................................... 16
FIGURE 15. ACCESS POINT MODE -2 ......................................................................................................................... 16
FIGURE 16. GATEWAY MODE ....................................................................................................................................... 17
FIGURE 17. CLIENT MODE ............................................................................................................................................ 17
FIGURE 18. AP MODE SETTINGS ................................................................................................................................ 18
FIGURE 19. WIRELESS SECURITY SETUP ...................................................................................................................... 19
FIGURE 20. WIRELESS ADVANCED SETTINGS ............................................................................................................. 21
FIGURE 21. WIRELESS ACCESS CONTROL ................................................................................................................... 22
FIGURE 22. WDS SETTING ........................................................................................................................................... 23
FIGURE 23. GATEWAY SETUP ........................................................................................................................................ 24
FIGURE 24. WAN PORT CONFIGURATION ................................................................................................................. 25
FIGURE 25. WAN ACCESS TYPE – STATIC IP ............................................................................................................ 25
FIGURE 26. WAN ACCESS TYPE – DHCP CLIENT .................................................................................................... 26
FIGURE 27. WAN ACCESS TYPE - PPPOE................................................................................................................. 27
FIGURE 28. CLIENT SETUP ............................................................................................................................................ 27
FIGURE 29. SITE SURVEY ............................................................................................................................................... 28
FIGURE 30. SERIAL TO ETHERNET CONFIGURATION .................................................................................................. 29
FIGURE 31. PASSWORD SETUP ..................................................................................................................................... 34
FIGURE 32. SYSTEM LOG .............................................................................................................................................. 34
FIGURE 33. UPGRADE FIRMWARE ................................................................................................................................ 35

WIZ610wi User’s Manual (WIZnet Co.,Ltd)
- 7 -
FIGURE 34. REBOOT SYSTEM ........................................................................................................................................ 37
FIGURE 35. WIZ610WI PIN MAP ............................................................................................................................. 38
FIGURE 36. WIZ610WI BOARD DIMENSIONS (UNIT : MM) ................................................................................... 40
FIGURE 37. SERIAL TERMINAL PROGRAM CONFIGURATION ..................................................................................... 42
FIGURE 38. NETWORK TERMINAL PROGRAM CONFIGURATION ............................................................................... 43
FIGURE 39. RECEIVED DATA BY NETWORK TERMINAL PROGRAM ........................................................................... 43
FIGURE 40. DEVICE TERMINAL PROGRAM .................................................................................................................. 44
FIGURE 41. WIZ610WI MODULE PIN ASSIGNMENT ................................................................................................ 62
FIGURE 42. SCHEMATIC - EXTERNAL PHY INTERFACE USING MII ........................................................................ 63
FIGURE 43. SCHEMATIC – RS-232C INTERFACE ....................................................................................................... 64
FIGURE 44. SCHEMATIC – SERIAL TO WIFI REFERENCE SCHEMATIC ....................................................................... 65
FIGURE 43. AGING TEST ENVIRONMENT ..................................................................................................................... 66

WIZ610wi User’s Manual (WIZnet Co.,Ltd)
- 8 -
Tables
TABLE 1. PRODUCTS CONTENTS. .................................................................................................................................... 3
TABLE 2. PRODUCTS SPECIFICATION - WIRELESS .......................................................................................................... 3
TABLE 3. PRODUCTS SPECIFICATION - HARDWARE ...................................................................................................... 4
TABLE 4. PRODUCTS SPECIFICATION - SOFTWARE ........................................................................................................ 4
TABLE 5. SYSTEM DATA ................................................................................................................................................. 12
TABLE 6. AUTHENTICATION METHOD .......................................................................................................................... 20
TABLE 7. WEP CONFIGURATION .................................................................................................................................. 20
TABLE 8. WIRELESS ADVANCED SETTINGS .................................................................................................................. 22
TABLE 9. FACTORY DEFAULT VALUE ............................................................................................................................. 36
TABLE 10. WIZ610WI PIN FUNCTION........................................................................................................................ 39
TABLE 11. SERIAL CONFIGURATION FRAME FORMAT ................................................................................................ 45
TABLE 12. SERIAL CONFIGURATION REPLY FRAME FORMAT ..................................................................................... 45
TABLE 13. SERIAL CONFIGURATION STX & ETX ...................................................................................................... 45
TABLE 14. SERIAL CONFIGURATION REPLY CODE ...................................................................................................... 46
TABLE 15. WIZ610WI PIN ASSIGNMENT ................................................................................................................... 63
TABLE 15. AGING TEST RESULT ..................................................................................................................................... 67

1
1. Introduction
WIZ610wi is the gate way module which provides a bridge for RS-232 or Ethernet to
IEEE802.11 b/g wireless communications. Devices with the interface of RS-232 serial or
Ethernet can established a wireless network which can enable remote monitoring,
management and controlling.
Main Features
 Embedded 802.11b/g Wireless Networking
 Access Point, Client, Gateway, Serial to WLAN mode Supported
 Ethernet to Wireless Bridging
 Security with 64/128 bit WEP, WPA, WPA2(AES)
 MII, UART, U.FL(WLAN) Interface
 Ready to use serial to wireless application
 Max 25Mbps Data Streaming
 Compact Size : 39mm X 32mm X 4.7mm
 RoHS Compliant

2
Products Contents (WIZ610wi-EVB)
WIZ610WI Module
WIZ610wi Evaluation Board
Serial Cable
(Connect Serial Device to Test Board)
Network Cable
(Crossover Cable)
Power
(DC 5V 2A Adaptor)

3
Antenna
(2dBi PCB type + Coaxial Cable)
CD
(Manual, H/W & SW related Materials)
Table 1. Products Contents.
1.1 Product Specification
1.1.1 WIZ610wi Module
Wireless
ITEM Specification
Wireless Standard IEEE802.11b/g
Frequency Range 2.412~2.485GHz
Output Power
(Tolerance(+/-1dBm)
802.11b: 16dBm@11Mbps
802.11g: 14dBm@6~54Mbps
Receive Sensitivity 802.11b: -65dBm@11Mbps
802.11g: -76dBm@54Mbps
Data Rates 54Mbps-1Mbps
Modulation Type 11g: OFDM(64QAM, 16QAM, QPSK, BPSK)
11b: DSS(CCK, DQPSK, DBPSK)
Table 2. Products Specification - Wireless
Hardware
ITEM Specification
Interface
MII, UART, Power, 1.27mm Pitch Header Pin
U.FL(wireless)

4
Temperature Operation: -30℃~70℃ (Refer to the 7. Aging test report)
Storage: -40℃~115℃
Humidity Operation: 10% to 90%, Non-Condensing
Storage: 5% to 90%, Non-Condensing
Serial
Baud Rate : Max 921,600bps
Stop bits: 1
Parity: None, Odd, Even
Flow Control: XON/XOFF(software), CTS/RTS(hardware),
none
Power 3.3V
Power Consumption Under 480mA(3.3V)
Dimension 39mm X 32mm X 4.7mm
Ø 3mm hole X 1
Weight 8.0g
Table 3. Products Specification - Hardware
Software
ITEM Description
Operation Mode Access Point, Client, Gateway, Serial to Wireless LAN
Protocol A R P, U D P, TC P, Te l n e t , I C M P, I G M P, D H C P, P P Po E , B O O T P,
HTTP, TFTP
Security
WEP 64/128big
WPA/WPA2 PSK/AES/TKIP
802.1x(Radius)
SSL
Management HTTP, Telnet, Serial, UDP
Notification Event Logging
Table 4. Products Specification - Software

5
1.1.2 WIZ610wi Test Board
Figure 1. WIZ610wi Test Board

6
2. Getting Started
This manual describes all configurations in detail. For the quick and easy installation, please
refer to “WIZ610wi Quick Installation Guide”
2.1. Hardware Installation
For the testing, module and test board should be prepared.
STEP1: Insert WIZ610wi module in the socket of test board.
STEP2: Connect the test board to the HUB or PC by using a network cable.
STEP3: Connect the test board to the serial device by using the RS-232 serial
cable.
STEP4: Insert the power supply connector to the test board by using the 5V
DC power adaptor.

7
2.2. Configuration
2.2.1 Wizard Program
Execute Wizard Program. You can download the Wizard Program from WIZnet webstie.
Figure 2. WIZ610wi Wizard Program
ⓐ: If you click ⓒSearch button, details about WIZ610wi on the same network will be
displayed. You can check IP address, Subnet Mask, Gateway, DHCP, MAC Address, Standard
Type (802.11b or g) and SSID.
ⓑ IP Info: If you select a WIZ610wi, the IP address information is displayed.
ⓓ You can check or modify the IP address, Subnet Mask and Gateway of a WIZ610wi
module.
ⓔ MAC Addr: It displays the MAC Address of a WIZ610wi.
ⓕ Enable DHCP: You can enable or disable DHCP Server function.
After configuring ⓓ and ⓕ, click Set button for completing the configuration.
ⓖ Local System: It displays IP and MAC addresses of the PC where Wizard Program is
installed.
ⓗ Refresh: After changing IP address of the PC, click Refresh button to display the updated
information.
ⓘ DOS: It opens Command Prompt window.
ⓙ Ping: It sends Ping command to the selected WIZ610wi.
ⓚ Telnet: If you click Telnet Button, the window for telnet connection is shown. The default

8
login ID and password are admin.
Figure 3. WIZ610wi Telnet Window
ⓛ WEB: If you click WEB button, the web configuration window will be shown. For the
detail about web configuration, refer to 2.2.2 Connecting the webpage of WIZ610wi.
ⓜ EXIT: Wizard Program will be closed.
Figure 4. WIZ610wi Wizard Program
ⓝ: Select a WIZ610wi on the left window and click Get button. The wireless LAN
configuration detail of the selected module will be displayed after 4 seconds. You can check
the detail of SSID, Authentication, Encryption Mode, Key length, Key Format, Key Value, Data
Rate, Tx Power, Work Mode, Channel and etc. You can’t change the configuration.

9
Figure 5. WIZ610wi Wizard Program
ⓟ Serial Comm: You can test the function of “Serial to Wireless”. After connecting PC and
WIZ610wi using serial cable, execute serial terminal program.
ⓠ Select protocol type – UDP or TCP, and input port number. Port Open button is enabled
at the UDP mode, and Connect button is enabled at the TCP mode.
ⓡ Transferring data are displayed.
ⓢ Input data to be transmitted, and click Send button.

10
2.2.2 Connecting the Web page of WIZ610wi
1) Open a web browser on your PC and input “192.168.1.254”, the default IP address of
WIZ610wi.
Figure 6. Connecting to the Web page of WIZ610wi
Notice : Configure the network parameters of WIZ610wi and your PC.
¾ The default IP address of WIZ610wi is “192.168.1.254”. Your PC’s IP address should start
with these three sets of numbers “192.168.1.XXX”.
¾ WIZ610wi and PC can be connected through wireless network. Connect to WIZ610wi from
PC by using default SSID “WLANAP”
2) A pop up will request you to input your User ID and Password.
Default User ID : admin Password : admin
Figure 7. Input ID & Password

11
2.2.3 Checking Status
1) System Data
Figure 8. System Data
ITEM Description
Firmware Version The firmware version of WIZ610wi is displayed
Firmware Date The last date and time of firmware upgrade
MAC Address(LAN) the MAC Address of WIZ610wi for Ethernet
communication.
IP Address the IP address of WIZ610wi.

12
Network Mask the Network Mask of WIZ610wi.
Default Gateway the Gateway of WIZ610wi.
DHCP Server shows the DHCP server function is activated or not.
DHCP Start IP Address shows the first IP address to be assigned from DHCP
server.
DHCP Finished IP Address shows the last IP address to be assigned from DHCP
server.
MAC Address(WLAN) the MAC Address for wireless communication.
SSID the SSID of WIZ610wi.
Channel the wireless channel of WIZ610wi.
Table 5. Syst e m D a t a
Notice : WIZ610wi supports the MAC addresses for both Ethernet and Wireless interfaces.
2) Active Client
Figure 9. Active Clients
In this page, the information of clients connecting to WIZ610wi is displayed. If you click
“Refresh” button, the client list and information are updated.