Wolf CT30E User manual

Model CT30E
30" Framed Electric Cooktop
The black ceramic glass top of the Wolf
30" framed electric cooktop is beautifully
complemented by your choice of classic,
platinum or carbon stainless steel trim.
Three heating elements with seven zones
offer exceptional control of temperature
for cooking utensils of every size. A
bridge connects two elements for an
8-inch by 17-inch, 4400 watt heating area.
All elements offer True Simmer along with
one element that enables you to set the
temperature for melting.
Maximum Element Power
Triple-zone element power—
Model CT30E: 900 W/1800 W/2500 W
Model CT30E-208/S:
825 W/1750 W/2300 W
Single element power: 1200 W
Bridge-zone element power—
(2) 1800 W single elements with 800 W
bridge: 4400 W
Accessories
Filler strip for installation of multiple
cooktops or modules
Accessories are available through your
Wolf dealer. To obtain local dealer information,
visit the Showroom Locator section of our
website, wolfappliance.com.
Touch Controls
Classic CarbonPlatinum
This appliance is certified by Star-K to
meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Model CT30E
Translucent Surface
Model Options CT30E/S CT30E/P CT30E/B CT30E-208/S
Trim Finish Classic Platinum Carbon Classic
Features
Classic, platinum and carbon stainless
steel trim
Optional Model CT30E-208/S designed
specifically for use with 208 V AC
electrical supply
Easy-to-clean black ceramic glass surface
is resistant to scratching, staining, impact
and heat—translucent surface allows you
to see the glow of hot elements
High-frequency pulsation elements
improve cooking performance and control
Three heating elements with seven zones
Bridge-zone element connects two
elements to provide a larger cooking area
Temperature limiter to ensure that safe
operating temperature of ceramic glass is
never exceeded
Illuminated touch controls with graduated
control lighting
True Simmer setting on all elements
Melt setting on one element
Hot-surface indicator light in control panel
Lock mode—cooktop can be locked so
that no elements can be turned on
Universal OFF turns all elements off
Countdown timer with 1 to 99 minute range
and adjustable sound frequency and volume
Model CT30E with classic stainless steel trim.

Unit dimensions may vary by ±
1
/ 8 ".
Specifications
Overall Width 30"
Overall Height 33/4"
Overall Depth 21"
Heating Element Outer Diameter
(1) Triple 10"
(3) Single (2) 8" and 61/2"
Bridge Element Dimensions 8" x 17"
Recommended Cabinet Width 33"
Minimum Cabinet Width 30"
Minimum Cabinet Depth 223/4"
Minimum Height Clearance* 4"
Countertop Cut-Out** 283/8"W x 191/4"D
Electrical Requirements (CT30E)
240 V AC / 60 Hz / 40 amp
208 V AC / 60 Hz / 40 amp
Electrical Requirements (CT30E-208/S)
208 V AC / 60 Hz / 40 amp
Conduit 4' flexible 3-wire
Electric Rating 8.1 kW at 240 V AC
(CT30E) 6.1 kW at 208 V AC
Electric Rating
(CT30E-208/S) 7.9 kW at 208 V AC
Shipping Weight 45 lbs
*Minimum 5
3
/ 4 " clearance is required between
countertop and any combustible surface directly
below the cooktop.
**If the cooktop is to be used with any combina-
tion of additional cooktop units or modules with a
filler strip, the cut-out width increases to 29".
Installation Specifications
Overall Dimensions
Model CT30E
30" Framed Electric Cooktop
Dimensions in parentheses are in
millimeters unless otherwise specified.
21"
(533)
OVERALL
DEPTH
30" (762)
OVERALL WIDTH
5" (127)33/4" (96)
CONDUIT
2"*min (51)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
18"
(457)
191/4" (489)
COOKTOP CUT-OUT
DEPTH
21/2"min
(64)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
13" max
(330) 30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
24"min
(610)
*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance
from rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.
4" (102)
10"
(254)
31/2" (89)
33/4"min
(95)
30-INCH OVEN OPENING
E
283/8" (721) COOKTOP
CUT-OUT WIDTH
283/8" (721)
COOKTOP CUT-OUT WIDTH
FRONT OF COUNTERTOP
21/2"min
(64)
191/4" (489)
COOKTOP
CUT-OUT DEPTH
33" (838) RECOMMENDED
CABINET WIDTH
30"min (762)
2"**
(51)
Countertop Cut-Out Dimensions
Installation Notes
Complete installation specifications can be
found on our website, wolfappliance.com.