Wolf CT30IU User manual

Model CT30IU
30" Unframed Induction Cooktop
Model CT30IU shown in flush mounted installation.
Induction cooking has been used in
Europe for decades by professionals and
homeowners demanding the best in
performance. Induction cooking is so effi-
cient that it out-performs gas and electric
cooktops. There is no wasted heat
because energy is supplied directly to the
cooking vessel. With Wolf’s unframed
induction cooktops there’s no stainless
steel trim, just the sophisticated, minimal-
ist exterior subtly patterned design to
hide any unsightly scratches.
Features
Can be mounted flush with top of counter-
top or as a frameless installation sitting on
top of the countertop surface
Easy-to-clean black ceramic glass surface
is resistant to scratching, staining, impact
and heat
Induction elements heat cookware, not the
glass, for a cooler, safer cooking surface
Four high-efficiency induction elements
deliver power and control
Maximum element power: (2) 1800 W with
3000 W boost and (2) 1200 W
True Simmer setting on two elements
Melt setting on two elements
Cookware sensing—elements will not be
energized without an induction-compatible
pan on the cooktop surface
Hi-Power mode boosts power on 1800 W
elements by diverting power from adjacent
element
Temperature limiter to ensure that safe
operating temperature of ceramic glass is
never exceeded
Illuminated touch controls with graduated
control lighting and adjustable sound
frequency and volume
Hot-surface indicator light in control panel
Lock mode—cooktop will be locked so that
no elements can be turned on
Universal OFF turns all elements off
Countdown timer with 1 to 99 minute range
Model Options CT30IU
Design Unframed
Model CT30IU
How does induction cooking work?
The electricity flows through a coil to
produce a magnetic field under the ceramic
cooktop. When a cast iron or magnetic
stainless steel pan is placed on the ceramic
glass surface, currents are induced in the
cooking utensil and instant heat is generated
due to the resistance of the pan. Induction
only works with cooking vessels made of
magnetic materials, such as cast iron and
magnetic stainless steel (it will not work
with aluminum or copper pots).
Hi-Power Boost Control

Model CT30IU
30" Unframed Induction Cooktop
Installation Notes
Unframed induction cooktops can be
mounted flush with the top of the countertop
or as a frameless installation sitting on top of
the countertop surface.
Complete installation specifications can be
found on our website, wolfappliance.com.
Unit dimensions may vary by ±
1
/ 8 " (3).
2"*min (51)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
18"
(457)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
30-INCH OVEN OPENING
33" (838) RECOMMENDED
CABINET WIDTH
30"min (762)
283/8" (721) COOKTOP
CUT-OUT WIDTH
15/16" (33)
RADIUS
27/16" (62)
193/8" (492)
COOKTOP
CUT-OUT DEPTH
7/16" (11) RADIUS
301/8"** (765)
RECESSED AREA FOR
FLUSH MOUNT INSTALLATION ONLY
FRONT OF COUNTERTOP
19/16" (40)
211/8"** (537)
RECESSED AREA
FOR FLUSH MOUNT
INSTALLATION ONLY
**Minimum dimension, but may be exceeded by up to
1/8" (3).
RECESSED AREA FOR
FLUSH MOUNT INSTALLATION ONLY
5/16"(8)
7/8"
(22) max
COUNTERTOP
PROFILE
13" max
(330)
24"min
(610)
4"min (102)
SEE COUNTERTOP
CUT-OUT BELOW
SEE COUNTERTOP
CUT-OUT BELOW
*Minimum clearance from both side edges and back edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.
2"* (51)
E
10"
(254)
4"min (102)
TO OVEN
OPENING
31/2" (89)
41/2" (114)
Specifications
Overall Width 30"
Overall Height 4"
Overall Depth 21"
Induction Elements Four
Recommended Cabinet Width 33"
Minimum Cabinet Width 30"
Minimum Cabinet Depth 223/4"
Countertop Cut-Out Width 283/8"
Countertop Cut-Out Depth 193/8"
Minimum Height Clearance* 41/2"
Maximum Element Power (2) 1200 W
(2) 1800 W with 3000 W boost
Element Diameters 51/2", 63/4" and (2) 83/4"
Electrical Requirements 240/208 V AC
50/60 Hz, 40 amp circuit
Conduit 4' flexible 3-wire
Electrical Rating 7.2 kW at 240 V
6.3 kW at 208 V
Shipping Weight 48 lbs
*Minimum 6" clearance is required between
countertop and any combustible surface directly
below the cooktop.
Installation Specifications
Overall Dimensions
21"
(533)
OVERALL
DEPTH
30" (762)
OVERALL WIDTH
5" (127)4" (104)
TERMINAL BOX
Dimensions in parentheses are in
millimeters unless otherwise specified.