Wolf WL-240BF User manual

ELECTRO-HYDRAULIC 2-POST LIFT
WL-240BF
ASSEMBLY MANUAL
Ver.2308

This manual has been prepared for workshop personnel expert in the use of the lift (operator) and technicians responsible
for routine maintenance (Maintenance fitter).
This manual must be read with User’s Manual.
The lifting, transport, unpacking, assembly, installation, starting up, initial adjustment and testing, extraordinary mainte-
nance, repair, overhauls, transport and dismantling of the lift must be performed by specialized personnel from the licensed
dealer or a service center authorized by the manufacturer.
ALL PACKING, LIFTING, HANDLING, TRANSPORT AND UNPACKING OPERATIONS ARE TO BE PERFORMED EXCLUSIVELY BY EXPERT
PERSONNEL.
SKILLED AND AUTHORIZED PERSONNEL ONLY SHOULD BE ALLOWED TO PERFORM THESE OPERATIONS, FOLLOW ALL INSTRUC-
TIONS SHOWN BELOW CAREFULLY, IN ORDER TO PREVENT POSSIBLE DAMAGE TO THE CAR LIFT OR RISK OF INJURY TO PEOPLE.
BE SURE THAT THE OPERATING AREA IS CLEARED OF PEOPLE.

WL-240BF ASSEMBLY MANUAL
Step
1
Be sure to take a complete inventory of parts prior to beginning installation.
Columns
Power unit
Control Box

Step
2
To remove fixing bolts of packing brackets.
WL-240BF ASSEMBLY MANUAL

WL-240BF ASSEMBLY MANUAL
Step
3
To disassembly the package and remove all components and accessories.

WL-240BF ASSEMBLY MANUAL
Install area
Main column
Operator area
137.8”
3499 mm
113.4”
2880 mm
Step
4
1. To move two columns to install area.
2. Pay attention: to recognize and main columm and slave column position to install.
3. To lift up two columns.
4. To measure the distance of two columns, and two columns face each other accurately.

Step
5
1. Percussion drilling chopping bit 18.5mm depth 150mm.
2. Air purge to remove dust inside of hole.
3. Insert bolt with bushes and screw nut,
not to tighten to death, insert U shape washer
under the column baseplate to adjust,
by aid of spirit level measurement
to make column to be vertical at 90.
4. Insert bolt with hammer to hit in to the end.
5. Use the sleeve to tighten the nut
WL-240BF ASSEMBLY MANUAL

WL-240BF ASSEMBLY MANUAL
Step
6
To install the unlocking electromagnet and the lock plate.

Step
7
To lift up the carriage to the first latch.
WL-240BF ASSEMBLY MANUAL

Step
8
To install the synchronization cables.
WL-240BF ASSEMBLY MANUAL

Step
9
To install power unit on column and link the oil hoses.
WL-240BF ASSEMBLY MANUAL

Step
10
Place the U-shaped hose protection plate
and connect the oil hoses to the two cylinders.
WL-240BF ASSEMBLY MANUAL

WL-240BF ASSEMBLY MANUAL

WL-240BF ASSEMBLY MANUAL
Step
11
To install the control box on column.
Connect the two wires of unlocking electromagnet into control box. No. 10,10
Connect the wires of solenoid valve into control box. No. 11,11
Connect the wires of up limit switch into control box. No. 4,5
Connect the wires of power unit into control box. No. U ,V ,W
Connect the wires of power line into control box. No. L1,L2,L3

U
V
W
GND
WL-240BF ASSEMBLY MANUAL

10 10 11 11 4 5 U V W L1 L2 L3
GND
WL-240BF ASSEMBLY MANUAL

Step
12
To install arms and foot protector.
WL-240BF ASSEMBLY MANUAL

Step
13
To install columns curtain.
WL-240BF ASSEMBLY MANUAL

Step
14
To install electromagnets cover
and SUV adapter bracket.
WL-240BF ASSEMBLY MANUAL