
M Series Oven Quick Start Guide
Oven Operation
For complete information on the operation and maintenance
of your Wolf product, refer to the use & care guide.
For product information and assistance, touch INFO.
CAUTION
Do not place cookware on the oven oor or use
aluminum foil or other material to line the oven oor or
side walls. Failure to adhere to this notice will damage
the porcelain interior and will void your warranty.
PRIOR TO USE
To ensure all residual oil from the manufacturing process has
been removed, each oven must go through the following
procedure.
1Clean oven thoroughly with hot water and a mild deter-
gent. Rinse and dry with a soft cloth.
2Turn on ventilation. Some smoke and odor is normal.
3Touch or turn knob to CONVECTION ROAST (ROAST for
27" lower oven) and adjust temperature to 550°F for one
hour.
4Touch OFF (turn knob for professional model) and allow
oven to cool with the door closed.
EXTENDED OPTIONS
1Touch SETTINGS to access extended options.
2Touch or use the slide bar to select the desired option. If
more information is needed, touch INFO.
SETTING CLOCK
1Touch SETTINGS, then select TIME.
2Touch 12 HOUR or 24 HOUR mode.
3Use slide bars to set time of day, select AM or PM, then
touch SET. An audible chime indicates clock has been set.
SETTING TIMER
1Touch TIMER 1 or TIMER 2.
2Use slide bars to set duration, then touch SET. An audible
chime indicates the timer has been set.
3To cancel or edit, touch the countdown time on the
display.
4Oven will chime and time will ash when complete. Timer
will continue to chime until canceled or reset.
SETTING OVEN CONTROLS
1Touch QUICK START. Touch or use slide bar to select
desired cooking mode. For professional model, turn
selector knob to desired cooking mode.
2Touch START to select preset temperature. To change
temperature, touch or use slide bar to select desired tem-
perature, then touch START. For professional model, turn
selector knob to adjust temperature.
3Touch OFF to end mode. For professional model, turn
selector knob to OFF.
SETTING CONTROLS FOR PROOF
1Touch QUICK START, then select PROOF. For professional
model, turn selector knob to MORE, then select PROOF.
2Touch START to select preset temperature. To change
temperature, touch or use slide bar to select desired tem-
perature, then touch START. For professional model, turn
selector knob to adjust temperature.
3Touch OFF to end mode. For professional model, turn
selector knob to OFF.
SETTING CONTROLS FOR TEMPERATURE PROBE
1Preheat oven to desired oven temperature in desired mode
(bake or stone mode for breads).
2Insert probe into the thickest area of food. When making
bread, cook for approx 10 minutes before inserting probe.
3When preheat is complete, insert probe into probe recep-
tacle. Close oven door.
4Touch PROBE.
5Touch SET to select preset temperature. To change tem-
perature, use slide bar to select desired temperature, then
touch SET.
6An audible chime indicates internal temperature has
reached probe set point. Remove and reinsert probe to
verify internal temperature, then select OK or OFF.
SETTING CONTROLS FOR CLEAN
1Touch QUICK START, then select CLEAN. For professional
model, turn selector knob to MORE, then select CLEAN.
2Remove oven racks and rack guides, then touch OK.
3Touch START.
4Touch OFF to end mode. For professional model, turn
selector knob to OFF.
5Oven door will lock and remain locked until the clean cycle
has ended and oven temperature has cooled below 550°F.