Woodendot Alba M User manual

ASSEMBLY INSTRUCTIONS
Alba M

4x4x 8x
(A) (B) (C) (D)
2x
1x1x OR
1x1x1x
2 DIFFERENT POSSIBILITIES
4 DIFFERENT POSSIBILITIES You will need a manual drill
for the wall holes
We recommend two people
for the installation
For the hole to be the exact depth, measure 50mm/1.96”
on the drill bit and place tape around it to mark the
distance. Stop drilling when it reaches that depth.
The drill bit required is Ø 6 mm or 15/64”
Depth of the hole in wall: 50 mm / 1.96”

2º
4º
3º
5º 6º
Make a line at the intersection of the
small piece of wood on the back.
Introduce the small
wooden piece
Introduce the small wooden piece with
the metal piece towards the back.
Screw on the L-shaped metal
piece using the marked line Screw to the set
Take out the small
wooden piece
7º 8º 9º
10º
11º 12º
(A)
(B)
(C)
(C)
(C)
(D) Place the double-sided
adhesives between the wall
and the wooden panel
1º
Use the level tool
Mark the holes with a pencil

ASSEMBLY INSTRUCTIONS
Alba M

2 DIFFERENT POSSIBILITIES
4 DIFFERENT POSSIBILITIES
4x4x 8x
(A) (B) (C) (D)
2x
1x1x OR
1x1x1x
You will need a manual drill
for the wall holes
We recommend two people
for the installation
For the hole to be the exact depth, measure 50mm/1.96”
on the drill bit and place tape around it to mark the
distance. Stop drilling when it reaches that depth.
The drill bit required is Ø 6 mm or 15/64”
Depth of the hole in wall: 50 mm / 1.96”

4º
5º
6º
(C)
(B)
(D)
2º
3º
(A)
(D)
8º
Make a line at the intersection of the
small piece of wood on the back.
7º
Introduce the small
wooden piece
Take out the small
wooden piece
9º
10º
Screw on the L-shaped metal
piece using the marked line
(C)
Introduce the small wooden
piece with the metal piece
towards the back.
11º
Screw to
the set
12º
(C)
1º
Use the level tool
Mark the holes with a pencil

ASSEMBLY INSTRUCTIONS
Alba M

2 DIFFERENT POSSIBILITIES
8 DIFFERENT POSSIBILITIES
4x4x 8x
(A) (B) (C) (D)
2x
1x1x1x
1x OR1x
You will need a manual drill
for the wall holes
We recommend two people
for the installation
For the hole to be the exact depth, measure 50mm/1.96”
on the drill bit and place tape around it to mark the
distance. Stop drilling when it reaches that depth.
The drill bit required is Ø 6 mm or 15/64”
Depth of the hole in wall: 50 mm / 1.96”