Woodendot Cielo User manual

ASSEMBLY INSTRUCTIONS
Cielo
Wall Cabinet
We recommend two people
for the installation
For the hole to be the exact depth, measure 50 mm/1.97”
on the drill bit and place tape around it to mark the
distance. Stop drilling when it reaches that depth.
You will need a manual drill
for the wall holes
The drill bit required is Ø 8 mm or 5/16”
Depth of the hole in wall: 50 mm/1.97”
(B) 4x (A) 4x
1x
(D)
(C) 2x

1º You will find the cabinet assembled.
In order to install it you must first remove
the shelf (D) [it is joined to the rear piece].
4x
(A)
(B)
2º
Hold the cabinet to the wall, use the
level tool to make sure it’s horizontal.
Mark the cabinet holes and put the
cabinet aside.
Drill the holes in the wall
with the manual drill.
Attach the cabinet to the wall
using the anchors and screws.
(D)
3º Now that the stickers are in position, peel off
the stickers protectors from the other side.
Then, re-insert the shelf (D).
5º
Once the cabinet is secured, place the
two stickers (C) inside the metal base of
the cabinet, where the pointy corners are.
Peel off the protector on one side of the sticker
to put it in the corner. Repeat for the second sticker.
4º
(C)