woodmizer G13 Guide

WARNING! Read and understand this
manual before using this machine.
!
G13 Engine
Safety, Operation, Maintenance
& Parts Manual
034606 Engine, LT15G13 2002 rev.D
Safety is our #1 concern!
April 2010
Form #884
Used with
LT15G13 rev. E6.07

Active Patents assigned to Wood-Mizer, LLC
Wood-Mizer, LLC has received patents that protect our inventions which are a result of a dedication to
research, innovation, development, and design. Learn more at: woodmizer.com/patents
©2023 Wood-Mizer LLC
Printed in the United States of America, all rights reserved. No part of this manual may be reproduced in any form by any
photographic, electronic, mechanical or other means or used in any information storage and retrieval system without
written permission from
Wood-Mizer, LLC
8180 West 10th Street
Indianapolis, Indiana 46214

Table of Contents Section-Page
Table of Contents WM doc 11/28/23 iii
SECTION 1 SAFETY
1.1 Safety ..................................................................................................... 1-1
SECTION 2 OPERATION
2.1 Starting The Engine ............................................................................... 2-1
SECTION 3 MAINTENANCE
3.1 Safety ..................................................................................................... 3-1
3.2 Cooling System...................................................................................... 3-1
3.3 Air Filter & Pre-Cleaner ........................................................................ 3-1
3.4 Fuel Filter............................................................................................... 3-1
3.5 RPM Adjustments.................................................................................. 3-1
3.6 Miscellaneous Maintenance...................................................................3-2
SECTION 4 REPLACEMENT PARTS
4.1 Engine Assembly ................................................................................... 4-4
LT15 Rev. E1.00+ .....................................................4-4
4.2 Engine Assembly ................................................................................... 4-6
LT15 Rev. D4.00 - D7.00 ..........................................4-6
4.3 Engine Assembly ................................................................................... 4-8
LT15 Rev. A1.00 - D3.00...........................................4-8
4.4 Throttle/Clutch Assembly.................................................................... 4-10
LT15 G13/G15Rev. E1.00 - E6.09 .....................................4-10
4.5 Throttle/Clutch Assembly.................................................................... 4-12
LT15 Rev. D4.00 - D7.00 ........................................4-12
4.6 Throttle/Clutch Assembly.................................................................... 4-14
LT15 Rev. D3.00 .....................................................4-14
4.7 Throttle/Clutch Assembly.................................................................... 4-16
LT15 Rev. A1.00 - D2.00.........................................4-16

Introduction
Safety
1
1-1 WM doc 11/28/23 Introduction
SECTION 1 SAFETY
This manual is provided as a supplement to the equipment manufacturer’s manuals.
This manual provides information specific to the use of this equipment on the Wood-Mizer® sawmill. Refer to the sawmill opera-
tor’s manual and manufacturer's manual before attempting to operate this equipment.
NOTICE Read the sawmill operator’s manual and engine manufacturer’s manual for instructions and
safety precautions before operating this equipment.
The information and instructions given in this manual do not amend or extend the limited warranties for the equipment given at
the time of purchase.
Refer to the manufacturer’s manual for maintenance intervals and procedures unless otherwise instructed in this manual. Fol-
low the manufacturer’s recommendations for dusty conditions.
NOTICE This manual only provides information about additional procedures or procedures to be per-
formed at different time intervals than found in the manufacturer's manuals. Refer to the manufac-
turer's manual for complete maintenance instructions.
WARNING! Clean sawdust from all guards, vents, control boxes, or any area where saw-
dust may gather after every shift. Failure to do so may result in fire, causing death or seri-
ous injury.
1.1 Safety
Use caution when performing maintenance or service to the engine.
DANGER! Take proper protective measures against rotating shafts, pulleys, fans, etc.
Ensure loose clothing or long hair does not engage rotating members.
DANGER! Do not touch or perform service functions on a hot engine. Allow the engine to cool suffi-
ciently before beginning any service function. Hot engine components will cause serious burns.
WARNING! Remove the blade before performing any engine service.
WARNING! Wear eye, hand, and foot protection equipment when performing service functions.

Operation
Starting The Engine 2
Operation WM doc 11/28/23 2-1
SECTION 2 OPERATION
2.1 Starting The Engine
DANGER! Ensure the blade is disengaged and all persons are out of the path of the blade before
starting. Failure to do so will result in death or serious injury.
DANGER! Operate your engine only in well ventilated areas. The exhaust gases of your engine can
cause nausea, delirium, and potentially death unless adequate ventilation is present.
DANGER! Never operate an engine with a fuel or oil leak. This is a fire hazard, which may cause
serious injury or death.
WARNING! Do not operate engine without proper and operational spark arrester/muffler. Sparks
emitted from the engine exhaust could ignite surrounding materials, causing serious injury or death.
CAUTION! EPA Compliant Gas Tanks Only: Always relieve all fuel pressure inside the tank prior to
filling or connecting fuel fittings. Failure to do so may result in fuel spillage.
CAUTION! EPA Compliant Gas Tanks Only: Disconnect the fuel tank when not in use, or engine
flooding or fuel spillage may result.
1. Turn the run/stop switch to the RUN position.
2. Close the engine choke by moving the choke lever to the start
position.
3. Pull the start rope slowly until you feel resistance, then pull the
cord quickly to start the engine. Repeat with the choke opened
slightly if necessary.
NOTE: If the engine is hard to start with the throttle in
the idle position, push the throttle swivel plate down
slightly and retry.
4. When the engine starts, slowly open the choke all the way by
moving the choke lever to the off position.
For more information, see the engine manufacturer’s operation man-
ual.
ENGINE SHUTOFF
1. Disengage the clutch handle to stop the blade if necessary.
2. Let the engine run for 15 seconds with no load, then push the run/stop switch to STOP.
FIG. 2-1

Maintenance
Safety
3
3-1 WM doc 11/28/23 Maintenance
SECTION 3 MAINTENANCE
Refer to the manufacturer’s manual for maintenance intervals and procedures unless otherwise instructed in this manual. Fol-
low the manufacturer’s recommendations for dusty conditions.
NOTICE This manual only provides information about additional procedures or procedures to be per-
formed at different time intervals than found in the manufacturer's manuals. Refer to the manufac-
turer's manual for complete maintenance instructions.
WARNING! Clean sawdust from all guards, vents, control boxes, or any area where saw-
dust may gather after every shift. Failure to do so may result in fire, causing death or
serious injury.
3.1 Safety
Use caution when performing maintenance or service to the engine.
DANGER! Take proper protective measures against rotating shafts, pulleys, fans, etc.
Ensure loose clothing or long hair does not engage rotating members.
DANGER! Do not touch or perform service functions on a hot engine. Allow the engine to cool suffi-
ciently before beginning any service function. Hot engine components will cause serious burns.
WARNING! Remove the blade before performing any engine service.
WARNING! Wear eye, hand, and foot protection equipment when performing service functions.
3.2 Cooling System
Wash the engine or brush off sawdust and debris every 50 hours of operation.
Clean the grass screen, cooling fins, and external surfaces.
Remove any dust, dirt, or oil.
See engine manual for further instructions.
3.3 Air Filter & Pre-Cleaner
WARNING! Always wear proper safety equipment when performing service functions, including eye
protection, breathing protection, hand protection and foot protection.
Service the pre-cleaner every four hours of operation by gently shaking excess sawdust and debris from the foam piece.
Clean the air filter (air cleaner element) and pre-cleaner (element wrapper) every eight hours of operation.
Replace the air filter (cleaner) every 200 hours of operation.
Replace the pre-cleaner (element wrapper) every 2000 hours of operation.
See the engine manual for further instructions.
3.4 Fuel Filter
Replace the fuel filter every 100 hours of operation or as required for engine performance.
3.5 RPM Adjustments
WARNING! Remove the blade before performing any engine service. Failure to do so may result in
serious injury.

Maintenance
Miscellaneous Maintenance 3
Maintenance WM doc 11/28/23 3-2
Check the RPM with a tachometer every 200 hours of operation.
Before checking the RPM, make sure belt and brake strap tensions are correct (See Sawmill Maintenance).
Check oil, fuel, and coolant levels.
Ensure the throttle cable does not affect the engine RPM when the clutch handle is disengaged. Ensure the cable is not
bent or kinked.
1. Start the engine to measure the low-end RPM.
2. Refer to the engine manual to adjust the low-end RPM.
3. Engage the clutch handle to throttle the engine and measure the high-end RPM.
The high-end RPM is factory-set at 3750. Readjust the throttle cable if necessary to increase or reduce the high-end engine
speed.
3.6 Miscellaneous Maintenance
CAUTION! Do not remove the plug wire to check for electrical spark. Damage to the ignition cir-
cuit may result.
Inspect the spark plugs every 100 hours of operation. Remove any deposits and adjust gap if necessary. See engine man-
ual for further information.
Clean and inspect the spark arresters every 50 hours of operation. Replace if damaged.
Review the manufacturer's manual for maintenance intervals.
Engine High End RPM Low End RPM
G13 3750 1800

Replacement Parts
Engine Assembly
4
4-4 WM doc 11/28/23 Replacement Parts
SECTION 4 REPLACEMENT PARTS
4.1 Engine Assembly
LT15Rev. E1.00+
REF PART # DESCRIPTION COMMENTS QTY.
P12393 Cover, Engine 1
034806 ENGINE ASSEMBLY, 13 HP KOHLER
W/CLUTCH
1
1014809 Engine, 13 HP Kohler #PA22519 1
2014718 Filter, Kohler Air #47-083-01 1
3014719 Pre-Cleaner, Kohler Air #52-083-01 1
4036653 Filter, Kohler Oil #28-050-01-S Shorter Oil Filter 036653
required for LT15G13 Rev.
E4.00 and later to avoid interfer-
ence with up/down assist mech-
anism. Either filter can be used
for previous revisions.
1
014717 Filter, Kohler Oil #52-050-02 1

Replacement Parts WM doc 11/28/23 4-5
Replacement Parts
Engine Assembly 4
016498 Muffler Kit, G13 Kohler 1
5016106 Muffler, Kohler #12-068-39 Available in assemblies only. 1
6016494 Gasket, Kohler Muffler #12-041-03 1
7016497 Deflector, Kohler Flat #12-755-27 1
8016495 Arrestor, Kohler Spark #12-189-02 1
9016105 Guard, Kohler Muffler #12-314-11 No longer available (5/16). No
replacement part available from
Kohler or Wood-Mizer.
1
P12757 Plug, Kohler Spark #12-132-02 (Cham-
pion #RC12YC)
1
014720 Filter, Kohler In-Line Fuel #25-050-02 1
051992 Switch, Kohler PHI Oil #25-099-24-S 1
Throttle and Clutch Parts (See Section 4.5)
10 P10082 Hose, Oil Drain 1
11 P04332 Cap, Oil Drain Hose 1
12 016493 Plate, LT15 Engine Guard 1
13 016512 Sheave, BK55QT 1
14 S04124 Key, 1/4” X 1 11/16” Replaces S21486 1/4" x 1" key.
S04124 always used in produc-
tion.
1
15 016513 Bushing, QT x 1” 1
16 017943 BELT, BX87 DRIVE 1
17 F05011-3 WASHER, 3/8” SAE FLAT 4
18 F05011-4 WASHER, 3/8” SPLIT LOCK 4
19 F05007-119 BOLT, 3/8-16 X 1 3/4” HEX HEAD GR5 4
20 034641 Spacer, 17/32” x 1 1/2” x 3/4” 4
REF PART # DESCRIPTION COMMENTS QTY.

Replacement Parts
Engine Assembly
4
4-6 WM doc 11/28/23 Replacement Parts
4.2 Engine Assembly
LT15Rev. D4.00 - D7.00
REF PART # DESCRIPTION COMMENTS QTY.
P12393 Cover, Engine 1
016517 ENGINE ASSY, 13 HP KOHLER W/CLUTCH 1
1014809 Engine, 13 HP Kohler #PA22519 1
2014718 Filter, Kohler Air #47-083-01 1
3014719 Pre-Cleaner, Kohler Air #52-083-01 1
4014717 Filter, Kohler Oil #52-050-02 1
016498 Muffler Kit, G13 Kohler 1
5016106 Muffler, Kohler #12-068-39 Available in assemblies only. 1
6016494 Gasket, Kohler Muffler #12-041-03 1
7016497 Deflector, Kohler Flat #12-755-27 1

Replacement Parts WM doc 11/28/23 4-7
Replacement Parts
Engine Assembly 4
8016495 Arrestor, Kohler Spark #12-189-02 1
9016105 Guard, Kohler Muffler #12-314-11 No longer available (5/16). No
replacement part available from
Kohler or Wood-Mizer.
1
P12757 Plug, Kohler Spark #12-132-02 (Cham-
pion #RC12YC)
1
014720 Filter, Kohler In-Line Fuel #25-050-02 1
051992 Switch, Kohler PHI Oil #25-099-24-S 1
Throttle and Clutch Parts (See Section 4.5)
10 P10082 Hose, Oil Drain 1
11 P04332 Cap, Oil Drain Hose 1
12 016493 Plate, LT15 Engine Guard 1
13 016512 Sheave, BK55QT 1
14 S04124 Key, 1/4” x 1 11/16” 1
15 016513 Bushing, QT x 1 1
16 016505 BELT, BX82 DRIVE 1
17 F05011-3 WASHER, 3/8” SAE FLAT 4
18 F05011-4 WASHER, 3/8” SPLIT LOCK 4
19 F05007-7 BOLT, 3/8-16 X 1” HEX HEAD 4
REF PART # DESCRIPTION COMMENTS QTY.

Replacement Parts
Engine Assembly
4
4-8 WM doc 11/28/23 Replacement Parts
4.3 Engine Assembly
LT15Rev. A1.00 - D3.00
REF PART # DESCRIPTION COMMENTS QTY.
P12393 Cover, Engine 1
014801 ENGINE ASSY, 13 HP KOHLER W/CLUTCH 1
1014809 Engine, 13 HP Kohler #PA22519 1
2014718 Filter, Kohler Air #47-083-01 1
3014719 Pre-Cleaner, Kohler Air #52-083-01 1
4014717 Filter, Kohler Oil #52-050-02 1
016498 Muffler Kit, G13 Kohler 1

Replacement Parts WM doc 11/28/23 4-9
Replacement Parts
Engine Assembly 4
5016106 Muffler, Kohler #12-068-39 Available in assemblies only.
Use muffler kit 016498 for ser-
vice. Kit includes gasket, deflec-
tor and spark arrestor. Muffler
016106 no longer a sellable
item (3/00).
1
6016494 Gasket, Kohler Muffler #12-041-03 1
7016497 Deflector, Kohler Flat #12-755-27 1
8016495 Arrestor, Kohler Spark #12-189-02 Spark arrestor 016495 replaces
016146 originally supplied prior
to 3/00 (duplicate parts).
1
9016105 Guard, Kohler Muffler #12-314-11 No longer available (5/16). No
replacement part available from
Kohler or Wood-Mizer.
1
P12757 Plug, Kohler Spark #12-132-02 (Cham-
pion #RC12YC)
1
014720 Filter, Kohler In-Line Fuel #25-050-02 1
051992 Switch, Kohler PHI Oil #25-099-24-S 1
10 015441 Bracket Weldment, Throttle Mount/Switch
Mount
1
11 015444 Switch, Engine Stop/Run 1
12 F05708-3 Terminal, 1/4” 14-16 Ga Quick Female FI 2
13 F05092-2 Terminal, 1/4” 14-16 Ga Ring NI Loose 1
14 Throttle and Clutch Parts See Section 4.5
15 P10082 Hose, Oil Drain 1
16 P04332 Cap, Oil Drain Hose 1
17 014810 Plate, G13 Engine Mount 1
18 F05011-3 Washer, 3/8” SAE Flat 4
19 F05011-4 Washer, 3/8” Split Lock 4
20 F05007-7 Bolt, 3/8-16 x 1” Hex Head 4
21 F05007-131 BOLT, 3/8-16 X 1 1/4” SPRING WASHER LOCK
HEX HEAD
4
22 014975 ROD, BELT TENSION ADJUSTMENT 1
23 F05010-1 NUT, 3/8-16 HEX 2
24 014819 BELT, BX81 1
REF PART # DESCRIPTION COMMENTS QTY.

Replacement Parts
Throttle/Clutch Assembly
4
4-10 WM doc 11/28/23 Replacement Parts
4.4 Throttle/Clutch Assembly
LT15 G13/G15Rev. E1.00 - E6.09
REF PART # DESCRIPTION COMMENTS QTY.
1034616 PLATE, THROTTLE CABLE BRACKET LT15G 1
2F05005-1 SCREW, 1/4-20 X 3/4 FT HEX HEAD 1
3F05010-69 NUT, 1/4-20 NYLON LOCK 1
4014818 SPRING, EXTENSION 3/8 X 3 1
5034805 PIVOT WELDMENT, THROTTLE LT15G 1
6F05005-125 BOLT, 1/4-20 X 2 HEX HEAD GR5 1
7F05010-21 NUT, 1/4-20 SWAGED 2
8015446 LINK, THROTTLE 2 13/16 1
9034838 CABLE ASSEMBLY, LT15G15 THROTTLE 1
10 P04211 KNOB, 5/8-11 BALL 1
11 016487 HANDLE, LT15 CLUTCH 1
12 F05007-12 SCREW, 3/8-16 X 1/2 SOCKET HEAD CUP PT
SET
2
13 034815 ACTUATOR WELDMENT, THROTTLE LT15D&G 1
14 034818 LINKAGE, THROTTLE LT15D&G 1
15 F05005-15 BOLT, 1/4-20 X 1/2” HEX HEAD 1
16 F05010-21 NUT, 1/4-20 SWAGED 1
17 016486 BUSHING, 5/8” ID X 7/8” OD X 1 1/8” LONG
FLANGED BRONZE
2

Replacement Parts WM doc 11/28/23 4-11
Replacement Parts
Throttle/Clutch Assembly 4
18 034612 BLOCK WELDMENT, LINKAGE CLUTCH/BRAKE 1
19 F05012-16 PIN, 3/16 X 1 1/4 ROLL 1
20 034605 LINKAGE ASSEMBLY, W/BEARING 1
21 016486 Bushing, 5/8” ID x 7/8” OD x 1 1/8” Long
Flanged Bronze
1
22 F05010-35 NUT, 1/2-13 FREE HEX, ZINC 1
23 F05011-9 WASHER, 1/2 SPLIT LOCK 1
24 F05010-31 NUT, 1/2-13 JAM 1
25 034608 PIVOT WELDMENT, CLUTCH/BRAKE 1
26 P737 BUSHING, 1 X 1 1/4 X 3/4 FLG BRONZE 2
034603 BRAKE/CLUTCH ASSEMBLY, LT15 1
27 034613 Arm Weldment, Clutch/Brake LT15 1
28 F05007-124 Bolt, 3/8-16 x 2 Hex Head Gr5 1
29 F05010-10 Nut, 3/8-16 Hex Nylon Lock 1
30 016488 Block, LT15 Brake 2
31 F05004-2 Screw, 10-24 x 1” Socket Head Replaces F05004-50 originally
supplied before 4/03 (duplicate
part numbers).
4
32 F05010-14 Nut, #10-24 Keps 4
33 034602 Idler, 4" O.D. x 3/8 Bore 1
34 F05007-230 Bolt, 3/8-16 x 2-3/4” Hex Head Gr5 Full
Thread
1
35 F05011-3 Washer, 3/8 Flat 2
36 F05010-25 Nut, 3/8-16 Swaged Lock 2
37 034810 Spring, Idler Arm LT15/D/E/G 1
REF PART # DESCRIPTION COMMENTS QTY.

Replacement Parts
Throttle/Clutch Assembly
4
4-12 WM doc 11/28/23 Replacement Parts
4.5 Throttle/Clutch Assembly
LT15 Rev. D4.00 - D7.00
REF PART # DESCRIPTION COMMENTS QTY.
1016470 PLATE, BRAKE ACTUATOR 1
2F05006-11 BOLT, 5/16-24 X 1” HEX HEAD 2
3F05011-13 WASHER, 5/16” SPLIT LOCK 2
4F05010-21 NUT, 1/4-20 SWAGED 2
5F05011-11 WASHER, 1/4” SAE FLAT 6
6016503 PIVOT WELDMENT, THROTTLE LT15 1
7014818 SPRING, 3/8” X 3“ EXTENSION 1
8014826 WIRE, THROTTLE LT15 1
9F05005-125 BOLT, 1/4-20 X 2” HEX HEAD GRADE 5 1
10 F05005-4 SCREW, 1/4-20 X 1 3/4” HEX HEAD CAP 1
11 F05010-9 NUT, 1/4-20 KEPS 2
12 P04211 KNOB, 5/8-18 PLASTIC ROUND 1
13 016487 HANDLE, LT15 CLUTCH Clutch Handle 016487 modified
3/07 to eliminate possible pinch
point with feed rope pulley with
saw head at certain heights.
1
14 F05012-16 PIN, 3/16 X 1 1/4” ROLL 1

Replacement Parts WM doc 11/28/23 4-13
Replacement Parts
Throttle/Clutch Assembly 4
15 016486 BUSHING, 5/8” ID X 7/8” OD X 1 1/4” LONG
FLANGED BRONZE
2
16 016485 BUSHING, 3/4” ID X 1” OD X 1 1/8” LONG
FLANGED BRONZE
4
17 016477 PIN WELDMENT, MOTOR PIVOT 1
18 F05010-25 NUT, 3/8-16 SWAGED LOCK 1
19 F05007-27 BOLT, 3/8-16 X 3/4” HEX HEAD GRADE 2 1
20 F05007-55 SCREW, 7/16-20 X 1 1/2” SOCKET HEAD CAP 2
21 F05011-43 WASHER, 7/16” SAE FLAT 15/16” OD 1
22 016481 BLOCK, MOTOR HANDLE PIVOT 1
A12304 TURNBUCKLE ASSEMBLY, CLUTCH 1
23 F05010-38 Nut, 7/16-20 Jam 1
24 P11579 Rod End, 7/16-20 Right Hand Male 1
25 S11577 Turnbuckle, 3" Clutch 1
26 F05010-87 Nut, 7/16-20 Left Hand Jam 1
27 P11578 Rod End, 7/16-20 Left Hand Male 1
28 F05010-38 NUT, 7/16-20 JAM 1
29 F05011-48 WASHER, 7/16” SPLIT LOCK 3
30 F05010-10 NUT, 3/8-16 HEX NYLON LOCK 2
31 F05011-3 WASHER, 3/8” FLAT SAE 6
32 016472 PLATE, LOWER TURNBUCKLE MOUNT 1
33 F05010-83 NUT, 7/16-20 NYLON LOCK 1
34 F05007-35 BOLT, 3/8-16 X 4 1/2” HEX HEAD 2
35 F05004-51 SCREW, 10-24 X 1 1/2” SOCKET HEAD CAP
BLACK OXIDE
4
36 016488 BLOCK, LT15 BRAKE 2
37 F05010-14 NUT, #10-24 KEPS 4
38 040102 PIN, IDLER PIVOT 1
39 P113 PIN, 1/4” DIA LYNCH 1
40 F05005-38 SCREW, 1/4-20 X 1” HEX HEAD CAP 1
41 016508 SPRING, 3/8” OD X 4 1/2” LONG X .047” WIRE
EXTENSION
1
42 F05010-31 NUT, 1/2-13 JAM 1
43 F05008-8 BOLT, 1/2-13 X 2” HEX HEAD GRADE 5 Replaces F05008-33 1/2-13 x 1
1/2" Hex Head Bolt supplied
prior to 10/00. Longer bolt pro-
vides more brake adjustment.
1
44 016482 PLATE WELDMENT, BRAKE 1
45 014817 SPRING, EXTENSION 1/2” X 2 1/4” X .06” 1
46 016473 PLATE, LT15 MOTOR MOUNT 1
REF PART # DESCRIPTION COMMENTS QTY.

Replacement Parts
Throttle/Clutch Assembly
4
4-14 WM doc 11/28/23 Replacement Parts
4.6 Throttle/Clutch Assembly
LT15Rev. D3.00
REF PART # DESCRIPTION COMMENTS QTY.
1014825 HANDLE, THROTTLE/CLUTCH 1
2014835 GRIP, 1/2” I.D. X 3” LONG HANDLE 1
3014820 COLLAR, 1/2” I.D. X 7/8” O.D. LOCK 1
4P08060 BUSHING, SF1260-6 BRONZE 2
5014821 BRACKET, THROTTLE/CLUTCH HANDLE
MOUNT
1
6014837 BRACKET, THROTTLE/CLUTCH HANDLE PIVOT 1
7F05012-22 PIN, 3/16” X 5/8” ROLL 1
8014813 PLATE, THROTTLE MOUNT 1
9F05006-18 BOLT, 5/16-18 X 1 1/4” HEX HEAD FULL
THREAD
1
10 F05010-58 NUT, 5/16-18 HEX NYLON LOCK 4
11 F05011-4 WASHER, 3/8” SPLIT LOCK 2
12 F05007-27 BOLT, 3/8-16 X 3/4” HEX HEAD GRADE 2 2
13 014817 SPRING, 1/2” X 2 1/4” X .06” EXTENSION 1
14 014836 BRACKET WELDMENT, THROTTLE PIVOT 1
15 F05010-21 NUT, 1/4-20 HEX LOCK 2
16 F05011-11 WASHER, 1/4” SAE FLAT 2
17 014818 SPRING, 3/8” X 3” EXTENSION 1
18 014826 WIRE, THROTTLE 1
19 F05005-4 BOLT, 1/4-20 X 1 3/4” HEX HEAD GRADE 2 1
20 F05005-38 BOLT, 1/4-20 X 1” HEX HEAD GRADE 2 1
21 F05010-9 NUT, 1/4-20 SELF-LOCKING HEX 2
22 F05006-76 BOLT, 5/16-18 X 1 1/2” HEX HEAD GRADE 5
FULL THREAD
1
016514 CLUTCH/TURNBUCKLE KIT, LT15
SPRING-LOADED
Kit includes Clutch and
Spring-Loaded Turnbuckle. Use
to retrofit LT15 prior to Rev.
D3.00.
1

Replacement Parts WM doc 11/28/23 4-15
Replacement Parts
Throttle/Clutch Assembly 4
23 014816 Clutch, LT15 w/Brake Available in assemblies only.
Kit includes Clutch and
Spring-Loaded Turnbuckle. Use
to retrofit LT15 prior to Rev.
D3.00.
1
016446 Turnbuckle Assembly, LT15 Spring-Loaded
Clutch
1
24 016443 Turnbuckle, LT15 Clutch Available in assemblies only. 1
25 016444 Plunger, LT15 Clutch Turnbuckle 1
26 016492 Spring, 3/4” OD x 3” Long x .095” Wire
Compression
1
27 F04254-34 Ring, 3/4” Inside Retaining 1
28 F05010-28 Nut, 5/16-24 Hex 2
29 P09814 Rod End, 5/16-24 Male Right-Hand 2
016446-956 Instruction Sheet, LT15 Clutch Turn-
buckle Installation
1
016514-957 Instruction Sheet, LT15 Clutch Installation 1
30 F05006-1 BOLT, 5/16-18 X 1” HEX HEAD GRADE 2 1
31 S09174 SPACER, 1.016” X 1.5” X .56” 1
016437 BRACKET KIT, LT15G13 RETRO CLUTCH
MOUNT
Clutch Mount Bracket Kit
016437 replaces 014988 Clutch
Mount Bracket originally sup-
plied prior to LT15HA Rev. A.01.
Kit includes hardware neces-
sary to retrofit original bracket.
1
32 015979 Bracket, Clutch Mount 1
33 015978 Boss, 3/4 x 29/64 x 1 1/4” 1
34 F05011-48 Washer, 7/16” Split Lock 1
35 F05007-139 Bolt, 7/16-14 x 2” Hex Head Grade 5 Replaces F05007-121 7/16-20 x
1 1/2" Socket Head Bolt origi-
nally supplied prior to LT15HA
rev. A.01.
1
36 F05011-17 WASHER, 5/16” SAE FLAT 1
37 F05010-6 NUT, 5/16-18 HEX LOCK 1
38 F05007-117 BOLT, 7/16-20 X 1” SOCKET HEAD Replaces F05007-107 7/16-20 x
3/4" Socket Head Bolt originally
supplied (7/99).
1
REF PART # DESCRIPTION COMMENTS QTY.

Replacement Parts
Throttle/Clutch Assembly
4
4-16 WM doc 11/28/23 Replacement Parts
4.7 Throttle/Clutch Assembly
LT15Rev. A1.00 - D2.00
REF PART # DESCRIPTION COMMENTS QTY.
1014825 HANDLE, THROTTLE/CLUTCH 1
2014835 GRIP, 1/2” I.D. X 3” LONG HANDLE 1
3014820 COLLAR, 1/2” I.D. X 7/8” O.D. LOCK 1
4P08060 BUSHING, SF1260-6 BRONZE 2
5014821 BRACKET, THROTTLE/CLUTCH HANDLE
MOUNT
1
6014837 BRACKET, THROTTLE/CLUTCH HANDLE PIVOT 1
7F05012-22 PIN, 3/16” X 5/8” ROLL 1
8014813 PLATE, THROTTLE MOUNT 1
9F05006-18 BOLT, 5/16-18 X 1 1/4” HEX HEAD FULL
THREAD
1
10 F05010-58 NUT, 5/16-18 HEX NYLON LOCK 4
11 F05011-4 WASHER, 3/8” SPLIT LOCK 2
12 F05007-27 BOLT, 3/8-16 X 3/4” HEX HEAD GRADE 2 2
13 014817 SPRING, 1/2” X 2 1/4” X .06” EXTENSION 1
14 014836 BRACKET WELDMENT, THROTTLE PIVOT 1
15 F05010-21 NUT, 1/4-20 HEX LOCK 2
16 F05011-11 WASHER, 1/4” SAE FLAT 2
17 014818 SPRING, 3/8” X 3” EXTENSION 1
18 014826 WIRE, THROTTLE 1
19 F05005-4 BOLT, 1/4-20 X 1 3/4” HEX HEAD GRADE 2 1
20 F05005-38 BOLT, 1/4-20 X 1” HEX HEAD GRADE 2 1
21 F05010-9 NUT, 1/4-20 SELF-LOCKING HEX 2
22 F05006-76 BOLT, 5/16-18 X 1 1/2” HEX HEAD GRADE 5
FULL THREAD
1
014934 TURNBUCKLE ASSEMBLY, LT15 CLUTCH Available in assemblies only.
Turnbuckle retrofit 016446 avail-
able 3/00 (See Section 4.7).
1