Workplace Products 7000 Series User manual

Series 7000
MOBILE TECH STATION
ASSEMBLY INSTRUCTIONS
For Job No.:
WORKPLACE SYSTEMS, INC.
562 Mammoth Rd • Londonderry, NH 03053
Lit #400-09 (Rev 2005)
Assembly Tips
 • Donotremovecomponentsfromcartonspriortoassembly,as
  componentsdonotbearpartnumbers.Usepackinglisttolocate  
  eachcomponentbythecartonnumber.
 • Sorthardwarekitsbynumber.Donotopenbagsuntilreadyforuse.
 • Assemblebasicunitrst,thenaddanyoptionalaccessories.
Call 800-258-9700 • Fax [phone]
MODULARBENCHSYSTEMS
®
CONTENTS OF HARDWARE KITS
Kit #18
4ea.- 10x3/4”HexWasherHeadMachineScrews
4ea.- 1/4”FlatWashers
Kit #38
16ea.-5/16-18x3/4”HexHeadCapScrews
16ea.-5/16-18LockNuts
16ea.-5/16”FlatWashers

ASSEMBLING THE BASIC STATION
Note: Makehardwarehand-tight
onlyuntilspecied.
SINGLE CABINET UNIT
 (Kit#38)MountCasterstobase
 ofCabinetwithhardwarepro-
videdinKit#38.MakecertainCasters
areorientedindesiredlineoftravel.
TofastenoptionalTop,removetop
drawersfromCabinetandposition
ToponCabinet.Usingholesintopof
Cabinetasatemplate,drillpilotholes
intotheundersideoftheTop,taking
carenottodrillthroughthetop
surface.FastenToptoCabinetwith
the10x3/4PHSMSand1/4”at
washersprovidedinKit#18.
DOUBLE OR TRIPLE UNIT
Note: Cabinet-to-CabinetFrameis
usedwithdoublecabinetunitshaving
akneespacebetweenthem.(See
Fig. A) Cabinetswhicharebanked
upagainsteachotherdonotrequire
aFrame(See Fig. B).
ASSEMBLING THE BASIC STATION
3
2
3
4
(Kit #38)AttachCasterstoBase,
 makingcertaintoorientCasters
indesiredlineoftravel.
 PlacePlatforminBase.Position
 CabinetsinBase.IfFrameis
used,positionFramebetweenthe
Cabinets,aligningholesinFrame
withthoseintopofCabinets.
 Removetopdrawersfrom
 Cabinets.PositionTopon
Cabinets.Usingsquareholesintop
ofCabinetasatemplate,drill1/8”
pilotholesintoundersideofTop,
takingcarenottodrillthroughtop
surface. (Note:Metalinsertslocated
inundersideofToparenotusedin
thisassembly.)
(Kit #18)FastenTop(andFrame)to
Cabinets,usinghardwaresupplied
inKit#18.
2
Fig. A
Fig. B
FRAME
CABINET
PLATFORM
1



