World Market SURAI 607439 User manual

Page 1
Assembly Instructions
SURAI CONSOLE RESIN GREY FLORA 2 DRAWER
SKU - 607439
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
NOT FOR COMMERCIAL USE

LABEL QTY.
Hardware List
LABEL QTY.
Page 2
1
B-1
B-2
Right Leg 1
16H-1
DESCRIPTION
Left Leg
1
Allen Bolts
(M6 x 16mm)
A
DESCRIPTION
C
Top
Component List
1
Stretcher
LABEL QTY.
16T-1
DESCRIPTION
Allen Key
4 mm
Flat Washer
(6.5 mm x 16 mm) 16H-2

Place the Right Frame (B-1) on a padded non-marring surface. Gently insert the Stretcher (C) onto the metal bush on
Right Frame (B-1) ensuring the holes on the Stretcher (C) align with holes on the metal bush as illustrated.
Secure connections using Allen Bolt (H-1), and Flat Washer (H-2) with the help of Allen Key (T-1).
Repeat the same steps to assemble Left Frame (B-2). Do not fully tighten all connections yet.
B-1
B-2
C
Assembly Preparation
Before Beginning:
V·

f2xT •

b-
 •









T-1
H-1 H-2
FRONT
TOP

NOTE: Levelers can be used for adjustment if needed.
Using a second person to assist you, carefully turn the console assembly into the upright position. Ensure the console
legs sits evenly and all allen bolts from steps 1-2 have been fully tightened. Adjustable levelers on the bottom of each
post can be used for additional leveling adjustments if needed. Assembly is now complete and the product is ready to
use.
Page 4
Place the Top (A) upside down on a padded non-marring surface with the help of two people. Place the assembled
leg frame onto the underside of the Top (A) ensuring the holes on the Right and Left frame (B-1,B-2) align with the
pre-drilled holes on the metal posts of Top (A). Secure connections using Allen Bolt (H-1), with the help of Allen
Key (T-1).
T-1
H-2
H-1

E
F
G
H
I
Page 5
Bracket (E)
Long screw (F)
Drywall
Figure A Figure B
Top
Bracket (E)
Strap (H)
Figure C
Short screw (G)
Anti-Tip Measures
         


 
 
 


 
  
 
 

Care & Maintenance
Do not put hot items directly on furniture surface.
Do not clean with harsh cleansers or polish.
Do not place in direct sunlight.
Do not place near heating or cooling vents.
Do not write on without a padded barrier to protect the surface.
Do not place outside. For indoor use only.
Not for commercial use. For residential use only.
Dust and pick-up spills using a clean, non-colored, lint-free cloth.
Page 6