
16
2 in 1: Portable Power Cleaner/Water Sprayer
WG620E WG620E.2 WG620E.4 WG620E.5 WG620E.6
WG620E.8 WG620E.9
OPERATING INSTRUCTIONS
NOTE Before using the tool, read the instruction
book carefully.
INTENDED USE
This tool is intended for cleaning and watering.
ASSEMBLY & OPERATION
ACTION FIGURE
BEFORE OPERATION
Installing the battery pack See Fig. A1
Removing the battery pack See Fig. A2
Checking the battery condition
NOTE Fig. A3 only applies for the battery
pack with battery indicator light. See Fig. A3
Charging the battery pack
More details can be found in charger’s
manual See Fig. A4
ASSEMBLY
Attaching pressure cleaning lance to the
power nozzle
NOTE When attaching, align the two
projections on the lance with the grooves of
the power nozzle as shown in Fig. B.
See Fig. B1
Attaching the multi-spray nozzle
NOTE when attaching, rotate the nozzle
left and right to make sure the nozzle fully
seated into position and gently pulling it to
make sure it is locked into position securely.
See Fig. B2
Attaching extension lance to the power
nozzle See Fig. C1
Attaching short lance to the extension lance See Fig. C2
Attaching the hose to the power nozzle
NOTE After the hose is attached, check the
connection by gently pulling upon the hose.
It should not be pulled off.
See Fig. D1,
D2
Attaching your own water hose (optional)
1. Remove the hose adapter
2. Attach the home garden hose with
suitable connectors
NOTE: Besides the hose supplied, you can
also connect the power nozzle to your own
water hose with suitable connectors.
NOTE: Check whether the filter screen
is missing before retightening the hose
adapter. When retightening the quick hose
adapter, please tighten securely. Otherwise,
it may not draw any water for proper
operation.
See Fig. E1,
E2, E3
OPERATION
WARNING: The supplied battery is
not waterproof. To avoid risk of
battery failure, protect the battery from
water exposure during use. Store the
tool and battery in a dry place after use.
Start
NOTE At the first use or after long-term
storage, it is recommended to attach the tap
or inject water into the hose adapter with
the machine turned on, so as to empty the
air. Do not start working until the water goes
up along the hose and sprays out.
See Fig.
F1,F2,F3
Selecting the nozzle pattern
NOTE Choose a suitable nozzle pattern
according to your work. Spray
patterns 00, 150, 250and 400are applicable
for cleaning, and the spray pattern with the
symbol is best suitable for watering.
WARNING Do not shift the nozzle
pattern when the tool is powered on.
See Fig. G
Cleaning
WARNING: Do not connect the
machine to water supplies that are
dirty, rusty, muddy, or corrosive.
(Including window cleaning liquids,
plant foods, or fertilizers etc.)
NOTE: For proper maintenance after using
with sea water, the product should be rinsed
by fresh water.
See Fig. H, I
Watering See Fig. J
ATTACHMENT OF ACCESSORIES
A number of accessories have been supplied with this
product and are required for use in different
applications. Do not attempt to use cleaning without a
lance or any accessories attached.
1. Soap bottle (WA4036, sold separately)
Soap bottle provides detergent suds for deeper cleaning
of dirt. It is used in conjunction with power nozzle or
extension lance. (See Fig. K1, K2)
2. Brush (WA4048, sold separately)
Brush is for cleaning cars, boats, motorcycles etc. It is used
in conjunction with power nozzle or extension
lance. (See Fig. L1, L2)
3. Foldable water bucket (WA4015, sold separately)
Foldable water bucket allows you to connect to water
supply when you are far away from a water source.
When not in use, it can be folded for storage. (See Fig. M1,
M2)
4. Turbo nozzle (WA4037, sold separately)
The turbo nozzle delivers 360° of rotating water, which
cleans a larger area than the 0° water pattern during the