WUBEN A1 User manual

User Manual V2.2_230221
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

CONTENTS
Product Introduction
(EN) English
(CN) 简体中文
(DE) Deutsch
(FR) Français
(ES) Español
(IT) Italiano
(NL) Dutch
(SE) Swedish
(CZ) Čeština
(HU) Magya
(SK) Slovenčina
(KR) 한국어
(JP) 日本語
01
07
10
13
17
21
25
29
33
37
40
43
46
49
52
(AR) ﺔﯾﺑرﻌﻟا
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

Package List
Before using this product, please check whether the contents of the package are
complete.
1
Spare O-ring × 2 Screw × 2
A1 × 1 2Shoulder strap × 1
3
Power adapter set × 1
(US plug, EU plug, UK plug,
AU plug)
4
User manual, Warranty card × 1
65
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

About Product
Switch
Switch
(Breathing Light /
Battery Power Indicator)
Remote Control Antenna
Holder
Remote Controller
(Battery Power Indicator
of Controller)
Silicone
Protecting Case
Waterproof Cover
DC Charging Port
USB-A Discharging Port
Battery Power Indicator
Switch
Shoulder Strap Hole
Shoulder Strap Hole
Installation
× 1
Please tighten the flashlight body before using it.
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

Take out and install the Remote Controller.
Operation
Hold
Hold
Hold
× 1
× 1
× 1
× 4
Strobe SOS Strobe
× 3
Level 1 Level 2 Level 3 Level 4 Level 5
Turbo
× 1
× 1
Turbo
return
return
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

Remote Control
The factory default remote control is paired. If you find that the remote control is not available,
please press and hold the switch and switch on the flashlight at the same time for 5
seconds. When the red and blue lights on the switch flash alternately, press the switch of
the remote control switch within 30 seconds. It can be paired, otherwise the pairing is
unsuccessful.
5 Seconds 10 Meters
Type-C 5V / 1A
Remote Control Charging And Discharging
Charging
Charging finished
15% > C ≥ 0%
100% > C ≥ 15%
Battery Capacity (C) Status Indication
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

Lights on Lights off Lights flashing
Switch
Charging / Discharging
Discharging
Charging
DC power adapter
19V/3A 3 hours
Capacity C Charging
C=100%
C≥85%
85%>C≥68%
68%>C≥51%
51%>C≥34%
34%>C≥17%
17%>C≥0
Capacity C Charging
C≥85%
85%>C≥68%
68%>C≥51%
51%>C≥34%
34%>C≥17%
17%>C≥5%
5%>C
When one light flashes, the discharging function will not work, after
charging the battery, the discharging function will work again.
Supports QC2.0, QC3.0,
FCP, AFC, PD2.0, DCP,
BC1.2, and Apple
1. Plug in the USB-A cable
2. Single click to turn the flashlight on
STEP
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

2 mins + 2
Hours 5 mins + 2.5
Hours Hours Hours Hours Hours
513.5 43 105 //
20000 6000
12000 5000
4000 1500 400 100 4000 1000
Lumens Lumens Lumens
Lumens Lumens Lumens Lumens Lumens
Turbo StrobeLevel 5 Level 4 Level 3 Level 2 Level 1
FL1
Standard
Battery Capacity (C) Status Indication
Parameters
SOS
All data from experiments of WUBEN lab according to ANSI/NEMA FL1 standard, with 14.4V
8400mAh 4 series 2 parallel original standard battery pack, may vary because of different
experiment equipment, experiment environment, or other factors. Experiments are based on a
built-in Li-ion battery pack (capacity: 8400 mAh, voltage: 14.4 V).
2500 Meters
1563000 Candelas
IP68
2875g/101.38oz(with battery)
318mm × 151mm/12.52in × 5.94in(L × D)
LUMINUS SBT90 LED × 4
C ≥ 85%
85% > C ≥ 34%
34% > C ≥ 17%
17% > C ≥ 0
5s
5s
5s
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

(EN) English
1
2
3
4
5
6
1
2
4
5
3
Operation
ON/OFF: Single click on the switch to turn on the flashlight, single click again to
turn off. The flashlight has memory function, will memorize default output
selections, but not flash modes or Turbo.
Default Output Selections: When the flashlight is on, single click on the switch
to cycle through Level 1- Level 2 – Level3 – Level 4 – Level 5 – Level 1.
Instant Turbo: When the flashlight is on, long press the switch to activate
Turbo mode, single click to back to the previous output level. When the flashlight
is off, press and hold the switch to activate the Turbo mode, release to turn it
off.
Flash Modes: When the flashlight is on or off, click the switch and hold for 1
second to activate Strobe. Single click the switch to swap between SOS and
Strobe. Single click the switch to the previous output level.
Lock/Unlock: When the flashlight is off, 4 times click any switch, the main light
will blink 3 times to indicate the locking of the flashlight. 4 times click on any
switch again will activate Eco mode to indicate the unlocking of the flashlight.
Breathing Light: At any mode, triple click the switch to turn on/off the blue
breathing light. The breathing light has power-off memory function.
Remote Control
The switch and switch are exactly the same as the switches on the flashlight.
Remote control range is 10 meters.
Charge the built-in battery of controller with 5V/1A device. Red light is charging,
green light is charging finished.
When it needs to be charged, the battery indicator will be red. Otherwise, it will
be green.
If there is no operation after the flashlight is turned off for 2 hours, the remote
control function will enter the sleep state. If you want to turn onthe remote
control again, double-click any key on the remote control. At this time, the red
and green lights of the remote control will flash slowly alternately until the
flashlight is lit, indicatingthat the remote control function is activated
successfully. (When the indicator light of the remote control is off and the
flashlight is not activated, try to put the remote control as close to the flashlight
as possible, and double-click any key on the remote control again to activate it.)
The factory default remote control is paired. If you find that the remote control is
not available, please press and hold the switch and switch on the flashlight
EN
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

Warnings
Please read user manual carefully before using the product.
Product will generate heat while working, the light head may be 90℃when it’s in
High mode. Please do not touch it and be cautious with that to avoid any possible
harm.
Please don’t flash into eyes directly to avoid harm to eyes.
Please keep the product away from children.
Please use WUBEN or WUBEN recommended batteries.
Please don’t disassemble the product or it will not be covered by WUBEN warranty
policy.
Please don't throw the product into fire.
This is not a diving product, please don't use it underwater for a long time.
Maintenance
The O-Ring may be damaged after a long time use, please replace the O-Ring in
time to ensure the waterproof level of the product.
Please use WUBEN battery or WUBEN recommended batteries.
When the product indicates low power, please charge or replace the battery in
time to avoid affecting the durability of the battery.
Please use alcohol and rag to clean the conductive parts of the product in time.
When not in use for a long time, please remove the battery to prevent the battery
from leaking or exploding.
Please store the product in a dry and ventilated place.
FAQs
Problems
Abnormal
flash or
failure to
turn on
Causes
Check if the switch is turned on correctly Turn on the switch
Tighten the assembly parts
Try the battery on other products
Remove the battery and reassemble it
correctly
Clean the surface with alcohol
Check if it is assembled in place
Check if the battery is no power
Check if the battery is reversed
Check if the conductive position is dirty
Solutions
Check if the switch is locked Unlock the switch
at the same time for 5 seconds. When the red and blue lights on the switch
flash alternately, press the switch of the remote control switch within 30
seconds. It can be paired, otherwise the pairing is unsuccessful.
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

If your problems are still not solved yet, please contact WUBEN Headquarters for after-sales service.
Abnormal
noise
Pourout possibleforeign matter
Contact your seller
Check if foreign matter falls in the tube
Part damage
1. Warranty Coverage
Warranty Policy
15 days replacement: Within 15 days from the date of purchase, if the product
has quality problems, customers can request free replacement.
1 year warranty: Within 1 year from the date of purchase, if the product has
quality problems, WUBEN will offer free repair.
5 years warranty: Within 5 years from the date of purchase, if the product
(accessories excluded) has quality problems, WUBEN will offer free repair for
WUBEN registered customers.
Battery warranty: WUBEN offers a 1-year warranty for the rechargeable batteries
but other included accessories are not covered by the warranty.
Lifetime maintenance: From the date of purchase, if the product has problem
after 5 years, WUBEN will offer paid repair for WUBEN registered customers.
If proof of purchase cannot be provided, it will be counted on the date of
manufacture.
If there is any dispute, the two parties will coordinate to solve.
The final interpretation right is reserved by WUBEN.
Man-made damage.
Damage caused by not following the instructions.
Damage caused by improper use of the battery.
Abnormal wear and tear.
Damage caused by irresistible factors.
Gifts.
2. Beyond Warranty
SHENZHEN SHENGQI LIGHTING TECHNOLOGY CO., LTD.
Add: Floor 5, Building A, Zhenhan Industrial Park, No. 1 Zhenhan
Road, Jihua Street, Longgang District, Shenzhen, Guangdong, China
E-mail: [email protected]
Web: www.wubenlight.com WUBEN website Facebook
The product complies EMC 2014/30/EU and RoHS 2011/65/EU as amended 2015/863/EU
directives.
The product can be disposed of in electric waste only.
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -
EN

(CN) 简体中文
1
2
3
1
2
3
4
5
4
5
6
开机/关机: 单击 键可点亮手电筒,再次单击关闭手电筒。手电筒具有照明亮度记忆功
能,不会记忆极亮档和闪烁模式。
档位调节: 开机状态,单击 键切换档位,档位设置为:1档-2档-3档-4档-5档-1档循
环切换。
快速极亮:开机状态,长按 键进入极亮档位并锁定,单击 键退出回到进入前档
位;关机状态下,按住 键进入极亮档可照明,松手即灭。
闪烁模式:任意状态下,长按 键1秒进入爆闪模式,单击 键循环切换闪烁档位:
“SOS-爆闪-SOS”循环切换,单击 键退出闪烁模式回到进入前状态。
锁定/解锁手电筒:关机状态下,四击任意键,前灯闪三下,表示锁定,按 键指示灯
会闪三次提醒,再次四击任意键,节能档点亮,表示锁定解除。
呼吸灯:任何状态下,三击 键,可以打开或关闭蓝色呼吸灯,带断电记忆。
操作说明
遥控模式
遥控器 键和 键分别对应手电筒上按键的功能,10米范围内可遥控手电。
遥控器内置电池充电5V/1A(图) ,充电红灯,充满绿灯。
电量指示绿灯表示有电,红灯表示需要及时充电
手电筒关机2小时后无操作,遥控功能进入休眠,如需遥控开机,请双击遥控器任意一
个按键,此时遥控器会红绿双色交替慢闪,直到手电筒点亮,表示激活成功。(当遥控
器指示灯关闭,手电筒还未激活,请尝试把遥控器尽可能靠近手电筒,再次双击遥控器
任意按键进行激活)。
出厂默认遥控器已配对,如发现不能遥控,请同时按住手电筒上 键和 键5秒,当电
源键上红、蓝2种灯交替闪烁时,30秒内按下遥控开关电源键即可配对,否则配对不成
功。
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

警示说明
使用前,请认真阅读说明书。
本品在使用过程中会产生大量的热量,高亮时灯头温度瞬间高达90度,勿触碰到,请注
意保护,以免对人体造成伤害。
本品为高亮产品,请勿对人眼照射,以免造成伤害。
请将本品放到12岁以下儿童接触不到的地方。
请使用务本的电池或务本推荐的电池。
请勿私自拆卸与维修手电,私自拆卸后将不予保修产品。
请勿将产品投入火中。
本品为非潜水类产品,请勿长时间在水下使用。
保养方法
防水圈长期使用可能会产生破损,请及时更换防水圈,以确保产品的防水性能。
请使用务本的电池或务本推荐的电池。
手电提示电量不足时,请及时充电或更换电池,以免影响产品正常使用。
请用酒精与抹布及时清理手电的导电部位。
长期不使用此产品时,请取出电池,以防止电池漏液或其它因素影响产品的正常使用。
请将手电置于通风干燥处存放。
检查手电筒是否锁定 解锁手电筒
问题描述
异闪或不亮
异 响
原 因
检查开关是否正确打开 打开开关
旋紧装配部件
用充电器检测电池
取下电池重新正确装配
用酒精擦拭导电位
倒出异物
请联系当地经销商
检查是否装配到位
检查电池是否有电
检查电池是否反装
导电位是否被弄脏
检查是否有异物掉入
零件损伤
解决方法
常见问题处理方法
如上述方法还没有解决您的问题, 请联系当地经销商进行售后服务。
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -
CN

保修规则
1.保修范围
15天包换:自购买之日起,15天内如产品出现质量问题,可选择更换同型号产品。
1年保修:自购买之日起,1年内如产品出现质量问题,可免费维修产品。
5年保修:自购买之日起,在务本官方网站注册登记产品的用户,5年内如出现质量问题,
务本将提供免费维修服务。
电池保修:充电电池保修期为1年,产品附加配件不在保修范围内。
终身维修:自购买之日起,注册用户5年后如出现质量问题,务本将提供有偿维修服务。
如无法提供购买证明时,将以出厂日期为准。
如有争议,双方协商处理。
2.不予保修范围
人为破坏造成产品损坏的。
不按说明书操作使用造成损坏的。
电池使用不当、电池漏液造成损坏的。
非正常磨损的。
不可抗力因素造成损坏的。
赠品。
最终解释权归务本品牌所有。
务本官方网站 订阅号
本产品符合2015/863/EU修订后的EMC 2014/30/EU指令和RoHS 2011/65/EU指令。
本产品只能作为电子电气废弃物处理。
经 销 商:深圳市盛祺照明科技有限公司
地 址:
广东省深圳市龙岗区吉华街道甘坑社区臻翰路1号臻翰工业区A栋5楼
网 址:www.wubenlight.com
电 话:+86-755-21010616
生产厂家:东莞市盛祺照明科技有限公司
厂家地址:广东省东莞市企石镇莲子湖路1号1号楼
执行标准:Q/441900SQZM
销售电话:0769-86661133
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

1
2
4
3
1
2
3
4
5
6
(DE) Deutsch
Bedienung
Ein/Ausschalten: Klicken Sie einmal auf , um die Taschenlampe einzuschalten.
Klicken Sie noch einmal, um sie auszuschalten. Die Taschenlampe verfügt über
eine Speicherfunktion, kann die Standardausgangsauswahl speichern, jedoch
nicht den Blitz- oder Turbo-modus.
Standardausgangsauswahl: Wenn die Taschenlampe eingeschaltet ist, drücken
Sie lange die -Taste, um den Kreislauf der Ausgänge 1-2-3-4-5-1 umzuschalten.
Schnelle Turbo: Wenn die Taschenlampe eingeschaltet ist, drücken Sie lang die
-Taste, um den Turbo-Modus zu aktivieren und zu sichern. Drücken Sie Sie die
-Taste, um vom Turbo-Modus auszutreten und zum früheren Ausgang
zurückzukehren; wenn die Taschenlampe ausgeschaltet ist, drücken Sie haltend
die -Taste, um den Turbo-Modus zu aktivieren. Lassen Sie den Schalter wieder
los, um die Taschenlampe auszuschalten.
Blitzmodus: Drücken Sie in jedem Zustand 1 Sekunde lang, um die Strobe zu
aktivieren. Dann drücken Sie einmal die -Taste, um den Kreislauf der
Blitz-Ausgänge: „SOS-Strobe-SOS“ umzuschalten. Drücken Sie wieder , um von
der Strobe auszutreten und zum früheren Zustand zurückzukehren.
Verriegeln/Entriegeln der Taschenlampe: Wenn die Taschenlampe
ausgeschaltet ist, drücken Sie viermal jede Taste, dann leuchtet das vorne Licht
dreimal, d.h. die Taschenlampe ist verriegelt. Drücken Sie die -Taste, dann
leuchtet das Anzeigelicht dreimal. Drücken Sie wieder viermal jede Taste, dann
leucht der Öko-Ausgang, d.h. die Taschenlampe ist entriegelt.
Atemleuchte: Klicken Sie in jedem Zustand dreimal auf die -Taste, um die
blaue Atemleuchte ein- oder auszuschalten. Die Atemleuchte hat eine
Ausschaltspeicherfunktion.
Fernbedienung
Die -Taste und die -Taste auf der Fernbedienung entsprechen jeweils den
Funktionen der Tasten auf der Taschenlampe. Der max. Abstand der Fernbedi-
enung beträgt 10m.
Die Batterie in der Fernbedienung ist mit 5V/1A aufzuladen. Beim Aufladen
leuchtet ein rotes Licht, und wenn die Batterie voll ist, leuchtet ein grünes Licht.
Grünes Licht für die Stromanzeige bedeutet, die Batterie hat noch genügenden
Strom. Rotes Licht für die Stromanzeige bedeutet, die Batterie ist sofort
aufzuladen.
Wenn die Taschenlampe 2 Stunden lang ohne Bedienung ausgeschaltet wird,
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -
DE

wechselt die Fernbedienungsfunktion in den Ruhezustand. Wenn Sie die
Taschenlampe aus der Ferne einschalten müssen, doppelklicken Sie bitte auf
eine beliebige Taste auf der Fernbedienung. Zu diesem Zeitpunkt wird die
Fernbedienung langsam rot und grün abwechselnd blinken, bis die Taschen-
lampe aufleuchtet, was bedeutet, sie ist erfolgreich aktiviert. (Wenn die
Anzeigelampe der Fernbedienung aus ist und die Taschenlampe noch nicht
aktiviert ist, versuchen Sie bitte, die Fernbedienung so nah wie möglich an die
Taschenlampe zu bringen, und doppelklicken Sie erneut auf eine beliebige Taste
auf der Fernbedienung, um sie zu aktivieren.)
Die Standard-Fernbedienung wird mit der Fertigungs-Fernbedienung Wenn Sie
feststellen, dass die Fernbedienung nicht möglich ist, drücken Sie bitte die
Power-Taste und die -Taste auf der Tastenlampe gleichzeitig für 5 Sekunden.
Wenn die roten und blauen Lichter auf der Power-Taste alternativ blinken,
drücken Sie die Power-Taste des Fernbedienungsschalters innerhalb von 30
Sekunden. Es kann gemischt werden, ansonsten ist das Paar nicht erfolgreich.
5
Warnhinweise
Bitte lesen Sie die Bedienungsanleitung sorgfältig durch, bevor Sie das Produkt
verwenden.
Dieses Produkt kann während des Gebrauchs eine Menge Wärme erzeugen und
bei hoher Helligkeit ist die Sockettemperatur 90 Grad. Bitte achten Sie darauf,
dass Sie nicht in Kontakt treten und den menschlichen Körper nicht beschädigen.
Es ist ein Produkt mit hoher Helligkeit. Bitte lassen Sie das Produkt nicht direkt in
die Augen strahlen, um Verletzungen zu vermeiden.
Bitte halten Sie das Produkt von Kindern unter 12 Jahren fern.
Bitte verwenden Sie die WUBEN-Batterie oder eine von WUBEN empfohlenen
Batterie.
Bitte demontieren oder reparieren Sie das Produkt nicht selbst, da es sonst nicht
unter die WUBEN-Garantie fällt.
Bitte werfen Sie das Produkt nicht ins Feuer.
Es ist kein Tauchprodukt, bitte verwenden Sie es nicht lange unter Wasser.
Wartung
Nach längerem Gebrauch kann der O-Ring kaputt gehen. Bitte ersetzen Sie den
O-Ring rechtzeitig, um sicherzustellen, dass das Produkt wasserdicht ist.
Bitte verwenden Sie die WUBEN-Batterie oder eine von WUBEN empfohlenen
Batterie.
Wenn das Produkt einen niedrigen Strom anzeigt, laden oder ersetzen Sie die
Batterie rechtzeitig, um die Lebensdauer der Batterie nicht zu beeinträchtigen.
Bitte reinigen rechtzeitig mit Alkohol und Lappen die leitfähigen Teile des
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -

Wenn Ihre Probleme immer noch nicht gelöst sind, wenden Sie sich bitte an den Kundendienst beim
WUBEN-Hauptsitz.
FAQs
Probleme
Ungewöhn-
licher Blitz
oder Fehler
beim
Einschalten
Ungewöhn-
liches
Geräusch
Ursachen
Schalten Sie den Schalter ein
Ziehen Sie die Bauteile fest
Probieren Sie die Batterie bei anderen
Produkten aus
Entfernen Sie die Batterie und bauen
Sie sie wieder richtig zusammen
Gießen Sie mögliche Fremdkörper aus
Kontaktieren Sie lokalen Vertrieb
Überprüfen Sie, ob der Schalter richtig
eingeschaltet ist
Überprüfen Sie, ob es richtig montiert ist
Überprüfen Sie, ob die Batterie keinen
Strom hat
Überprüfen Sie, ob die Batterie
vertauscht ist
Überprüfen Sie, ob FremdköPart
damagerper hineinfallen
Schaden an Bauteile
Lösungen
Überprüfen Sie, ob die leitende Position
verschmutzt ist Reinigen Sie die Oberfläche mit Alkohol
Überprüfen Sie, ob der Schalter
verriegelt ist Entriegeln Sie den Schalter
Garantieleistung
1.Garantieumfang
15 Tage-Wechsel: Wenn das Produkt Qualitätsprobleme aufweist, können Sie
innerhalb von 15 Tagen ab Kaufdatum einen kostenlosen Wechsel anfordern.
1 Jahr-Garantie: Wenn das Produkt Qualitätsprobleme aufweist, bietet WUBEN
innerhalb von 1 Jahr ab Kaufdatum eine kostenlose Reparatur an.
5 Jahre-Garantie: Wenn das Produkt (ohne Zubehör) Qualitätsprobleme aufweist,
bietet WUBEN innerhalb von 5 Jahren ab Kaufdatum eine kostenlose Reparatur
für WUBEN-registrierte Kunden an.
Garantie für die Batterie: WUBEN gewährt 1 Jahr Garantie auf die wiederauflad-
baren Batterien, mit Ausnahme der mitgeliefertenZubehöre.
Lebenslange Wartung: Wenn das Produkt nach 5 Jahren ab Kaufdatum
Qualitätsprobleme aufweist, bietet WUBEN kostenpflichtige Reparaturen für
registrierte WUBEN-Kunden an.
Wenn kein Kaufnachweis erbracht werden kann, wird es mit dem Herstellungsda-
Produkts.
Nehmen Sie die Batterie heraus, wenn das Produkt längere Zeit nicht verwendet
wird, damit keine Elektrolytflüssigkeit aus der Batterie ausläuft oder die Batterie
nicht explodiert.
Bitte lagern Sie das Produkt an einem trockenen und belüfteten Ort.
tum gerechnet.
Im Streitfall werden sich die beiden Parteien zur Lösung abstimmen.
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -
DE

2.Garantieausschluss
Schäden aus menschlichen Gründen.
Schäden aus Nichtbeachtung der Anweisungen.
Schäden aus unsachgemäßem Gebrauch der Batterie.
Außergewöhnlicher Abrieb und Verschleiß.
Schäden aus ForceMajeure.
Geschenke.
Das endgültige Auslegungsrecht bleibt WUBEN vorbehalten.
15 Tage-Wechsel: Wenn das Produkt Qualitätsprobleme aufweist, können Sie
innerhalb von 15 Tagen ab Kaufdatum einen kostenlosen Wechsel anfordern.
1 Jahr-Garantie: Wenn das Produkt Qualitätsprobleme aufweist, bietet WUBEN
innerhalb von 1 Jahr ab Kaufdatum eine kostenlose Reparatur an.
5 Jahre-Garantie: Wenn das Produkt (ohne Zubehör) Qualitätsprobleme aufweist,
bietet WUBEN innerhalb von 5 Jahren ab Kaufdatum eine kostenlose Reparatur
für WUBEN-registrierte Kunden an.
Garantie für die Batterie: WUBEN gewährt 1 Jahr Garantie auf die wiederauflad-
baren Batterien, mit Ausnahme der mitgeliefertenZubehöre.
Lebenslange Wartung: Wenn das Produkt nach 5 Jahren ab Kaufdatum
Qualitätsprobleme aufweist, bietet WUBEN kostenpflichtige Reparaturen für
registrierte WUBEN-Kunden an.
Wenn kein Kaufnachweis erbracht werden kann, wird es mit dem Herstellungsda-
SHENZHEN SHENGQI LIGHTING TECHNOLOGY CO., LTD.
Anschrift: Zhenhan Straße 1, Zhenhan Industriepark Gebäude A,
5. Stock, Gemeinde Gankeng, Kommune Jihua, Viertel Longang,
Shenzhen, Guangdong, China
E-mail: [email protected]
Web: www.wubenlight.com
Dieses Produkt entspricht der EMC-Richtlinie 2014/30/EU nach der Überarbeitung der
Richtlinie 2015/863/EU und RoHS 2011/65 / EU-Richtlinie.
Dieses Produkt kann lediglich als Elektro- und Elektronikschrott behandelt werden.
WUBEN website Facebook
tum gerechnet.
Im Streitfall werden sich die beiden Parteien zur Lösung abstimmen.
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 -
- 07 - - 08 - - 09 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 -
- 17 - - 18 - - 19 - - 20 - - 21 - - 22 - - 23 - - 24 - - 25 - - 26 -
- 27 - - 28 - - 29 - - 30 - - 31 - - 32 - - 33 - - 34 - - 35 - - 36 -
- 37 - - 38 - - 39 - - 40 - - 41 - - 42 - - 43 - - 44 - - 45 - - 46 -
- 47 - - 48 - - 49 - - 50 - - 51 - - 52 - - 53 - - 54 - - 55 - - 56 -
- 57 - - 58 - - 59 - - 60 -
Other manuals for A1
1
Table of contents
Other WUBEN Flashlight manuals