xelux smartglass I3 LED User manual

castelberg design gmbh | Räffelstrasse 29 | 8045 Zürich | Switzerland | 2022
Technical specications
Frame material: Polycarbonate, skin-friendly
Functional insert material: Glass/Plastics, skin-friendly
Total weight: 42 g
Dimensions: 170 x 150 x 50 mm
Standards: CE: EN166, EN170, EN172, EN379
Standards: ANSI / ISEA: Z87.1
Warranty: 36 months
Lifetime: Min. 8 years including battery lifetime
Standards
Marking CE
Only to be used for observing LED’s that emit light in the visible VIS
range exclusively.
3 /3 < 8/ GEO / 1 / 3 / 1 / 2 / 379 CE
Light state Dark state Manufacturer Optical class
Diffusion of light class Variations in luminous transmittance class Angle dependence of luminous transmittance
CE standard
Instruction Manual
Warning! The active safety glasses smartglass I3 LED are intended
exclusively to protect against LED light sources in the visual range
VIS.
Please read the instruction manual before rst use.
This personal protective equipment (PPE) complies with EU
regulation 2016/425, with effect from April 21, 2018.
Characteristics
Full color recognition and natural view with realcolor optics
Maximum eye protection at minimum weight
Combining comfort with safety
CE certied according EN166, EN170, EN172, EN379
ANSI / ISEA certied according Z87.1
Application
The active safety glasses smartglass I3 LED were developed for
people working in the production and quality control of LED light
sources. The active safety glasses smartglass I3 LED reliably protect
against blinding while working comfortably.
The active safety glasses smartglass I3 LED are fully operational out
of the box. There is no on/off switch. The active safety glasses
smartglass I3 LED will automatically darken.
Technology
The shade level of the light state of the active safety glasses
smartglass I3 is 2.5. Depending on illuminance, it dynamically
controls shade level between 2.5 and 8. When turning away from the
light source the active safety glasses smartglass I3 LED will turn to
its light state. The electronics were designed to only start darkening
once an uncomfortable illuminance threshold is reached.
The light state of the realcolor optics is clear and color neutral. This
allows the user to accurately perceive signal colors.
8
2.5
ARBEITEN IN FARBE
Active Safety GlassesAktive Schutzbrille
SWISS MADE

castelberg design gmbh | Räffelstrasse 29 | 8045 Zürich | Switzerland | 2022
Functional insert:
Push a coin or a similar at solid object between the frame and the
functional insert. Twisting the coin will eject the insert. Align the cam
of the functional insert with the corresponding hole on the frame.
Gently push the functional insert into the hole of the frame until it
snaps into position.
Security advice
The active safety glasses smartglass I3 LED may not be used for
other purposes besides protection from IPL-pulses.
The active safety glasses smartglass I3 LED should be stored at
temperatures from -10°C to +40°C and at a relative humidity below
80%. Avoid moisture and sunlight. The operating temperature is
between -10°C and +55°C. Prolonged use outside of ideal
temperatures can lead to damages that are not covered by the
warranty. Storage together with acids, alkalis, oils or organic solvents
can lead to damages to the product.
In rare cases allergic reactions to the glasses are possible. If the
glasses cause skin irritation, the active safety glasses
smartglass I3 LED must not be used further and medical advice is
recommended.
The active safety glasses smartglass I3 LED is certied as the
combination frame, cover lens and functional insert. The functional
insert must not be used without the cover lens.
If the active safety glasses smartglass I3 LED do not operate
normally or are clearly damaged they must not be used further.
Wearing the active safety glasses smartglass I3 LED on top of other
glasses can transmit shocks of high-speed particles and can
therefore be dangerous to the wearer.
Any application of the smartglass I3 LED outside of the specied
conditions, especially under extreme temperatures or exposure to
high-speed particles, is forbidden.
Accessories and spare parts
Frame, cover lens and functional insert are easily exchangeable. They
can be ordered individually.
Frame black complete with cover lens clear blue
Item no.: 10.051
Cover lens clear blue
Item no.: 10.810
Functional insert I3 LED
Item no.: 20.060
Distribution
Distribution is taken care of by the qualied retailers, our online shop
or by contacting us directly. We will also gladly recommend you a
local distribution partner.
Please visit our website castelberg-design.com where you can nd
further information.
If you have any questions, please do not hesitate to contact us. We
will gladly help you.
Marking ANSI / ISEA
Only to be used for observing LED’s that emit light in the visible VIS
range exclusively.
An original smartglass I3 LED must have one of the two markings!
Manufacturer and notied body
Manufacturer: castelberg design gmbh
Räffelstrasse 29
8045 Zurich
Switzerland
Notied body: ECS GmbH (1883)
Hüttfeldstrasse 50
73430 Aalen
Germany
The declaration of conformity can be found on our website:
www.xelux.ch
Maintenance, lifetime and warranty
The active safety glasses smartglass I3 LED require no maintenance
besides cleaning. They should be cleaned with a microbre towel or
any other towel intended to clean glasses. For disinfection use a
standard disinfectant with a towel. Do not pour or spray liquids
directly on to the glasses.
Power is provided by an integrated lithium ion battery. The battery
lifetime is 8 years at minimum and it can be replaced by the
manufacturer. Please dispose the product at the end of its lifetime in
an appropriate manner for electronics.
The warranty for material and manufacturing mistakes is 3 years.
Damages that result from physical abuse of the product are not
covered by the warranty. The warranty only applies for the intended
use case and only to unmodied products. Besides legit warranty
claims, no other damages are covered.
Changing of cover lens and functional insert
Cover lens:
Flip the cover lens upward. Pull the cover lens out of its holder. Insert
a new cover lens and let it snap into position.
GEO / U6 / W3 / 3 < 8 / Z87
Manufacturer
UV rating
Light state
Dark state
ANSI standard