Xenarc 800 User manual

800 / 802 / 805 INSTALLATION MANUAL

2 │ Table of Contents
Features................................................................03
Specifications....................................................04
Quick - Start........................................................ 05
Remote Control ................................................. 07
Hardware Installation.................................... 10
800 / 802 / 805 Models
Additional Info.....................................................14
Owner’s Record..................................................15

●Standard
○Not Available
Features │ 3
Model Comparison Chart
800YV 800TSV 802YH802TSH 805YV 805TSV
VGA ( D-SUB 15 Pin ) Input 1 1 1 1 1 1
VIDEO ( RCA ) Inputs 2 2 2 2 2 2
AUDIO ( RCA ) Inputs 2 2 1 1 2 2
PC AUDIO ( DC 3.5mm ) Input 1 1 1 1 1 1
Built - In Speaker
● ● ● ● ● ●
High Quality Scaling
● ● ● ● ● ●
High Quality Anti - Aliasing
● ● ● ● ● ●
Auto Power On
● ● ● ● ● ●
Touch Screen
○ ● ○ ● ○ ●
AR Touch Screen
○ ○ ○ ● ○ ○
HDMI Input ( with sound )
○○●●○○
Features
● For In-Car Computing, PC, Server, GPS, POS, and various VGA Use
● High Bright LCD Panel with LED Backlight
● 5-wire Resistive Touch Screen ( USB )
( Optional : 5-Wire Resistive AR+AF GFG Touch Screen )
● Multi - Monitor Touchscreen Support
● VGA Input ( D-SUB 15-Pin ) x 1
● Video Input x 2
● Audio Input x 3
● HDMI Input With Sound x 1 ( TSH/YH Only )
● Built-in Speaker
● NTSC / PAL Multi-System
● 4:3 Aspect Ratio
● High Resolution Display
● Supports HDMI Version 1.1 ~ 1.3 ( TSH/YH Only )
● Adjustable backlight level for night-time use
● Realtek High Performance Image and Video Signal Processor
● AISS - Advanced Image-Scaling and Shaping
● Factory Mode to disable front button(s)
● Factory Mode to disable on screen text
● Last Input memory
● Last Power setting memory
● IR Remote Control
● Auto power-on upon signal detection
● Automatic display adjustment
● On Screen Display Control
● Mirror Image Flip
● Vertical Image Flip
● AV2 Auto Switching for backup camera
● Copper Stand: 360° / Height Adjustment
● U-Shape mounting bracket ( 800 / 802 Only )
● VESA 75mm mounting holes
● 26-Pin heavy-duty connector with connector locking
● Anti Glare Coating
● Supports 9V DC ~ 36V DC
● "E" Mark Certified for Automotive use

4 │ Specification
Specifications
Display Specifications
● Screen Size : Diagonal 8” ( 4 : 3 )
● Physical Resolution : 800 ( H ) x 600 ( V )
● Pixel Pitch : 0.0675 ( H ) x 0.2025 ( V ) ( in )
● Dot Resolution : 2400 x 600 = 1,440,000 ( dots )
● Supported Resolution : 640 x 480 ~ 1920 x 1080
● Supported Refresh : 60~75Hz
● LCD Panel Brightness :
800 / 805 LCD Panel Brightness : 400cd/m²
802 LCD Panel Brightness : 1000cd/m²
● Contrast Ratio : 500 : 1
● Response Time : 10~15ms
● Viewing Angel : Vertical : 120゜/ Horizontal : 140゜
● Colors : 6-bits ( 262,144 colors )
Physical Specifications
● Video Source Input
— RGB analog male connector ( 15-Pin D-SUB ) x 1
— RCA composite video female connector x 2
— HDMI input connector x 1 ( TSH/YH Only )
● Audio Source Input
— RCA audio female connector x 2
— DC 3.5 mini stereo plug x 1
— HDMI audio x 1 ( TSH/YH Only )
● Touch Panel ( Input / Output )
— USB connector x 1 ( TSV/TSH Only )
● Power Source Input
— Single 12V DC_IN ( Supports 9V~36V )
● External Buttons Input
— OSD buttons for Power / Select / Menu / Increase / Decrease / Dimmer
— Power button for power switch
● Dimension ( In )
800 / 802 : 8.98 ( L ) x 6.46 ( H ) x 1.42 ( D ) In
805 : 7.87 ( L ) x 6.42 ( H ) x 1.44 ( D ) In
● Weight ( lb )
800 / 802 : 2.64 lbs
805 : 1.87 lbs
Electrical Specifications
● Operating Voltage Range : DC 9V ~ 36V 2A
● Power Supply : DC 12V
● Power Consumption :
Suspended Mode < 2W ( Max )
Continuous Mode < 14W ( Max )
● Audio Input < 150MV
Other Specifications
● Operating Temperature : -4℉ ~ 158℉
● Storage Temperature : -22℉ ~ 176℉
● FCC, CE, E13 Certification
● ROHS Compliant
● 24 Month Warranty

Quick - Start │ 5
Optional Mounting Stand ( 800 / 802 Only )
Step 1.
Slide Monitor into optional mounting stand
Step 2.
Secure “ Height ” position by adjusting Knob
Step 3.
Secure “ Tilt ” position by adjusting Knob
Optional Mounting Stand ( 805 Only )
Step 1.
Slide Monitor into optional mounting stand
Step 2.
Secure “ Height ” position by adjusting Knob
Step 3.
Secure “ Tilt ” position by adjusting Knob
U Type Stand ( 800 / 802 Only )
Secure “ Tilt ” position by adjusting knob
Please install the knob with
two washers as shown
Create VGA Source
Step 1.
Attach the 26-Pin connector to the monitor
Step 2.
Attach the D-Sub 15-Pin connector to your
computer’s analog VGA output connector
Create Power Source
Insert Power Adapter as show

6 │ Quick - Start
Create Audio / Video Source
Step 1.
Attach your “ Video Source one ”
( e.g. VCR, Video Game Console)
to the Yellow RCA connector marked Video 1
Step 2.
Attach your “ Video Source two ”
( e.g. VCR, Video Game Console)
to the Yellow RCA connector marked Video 2
Step 3.
Attach your “ Audio Source ” to the White / Red
connectors marked Audio.
The sound will be outputted through the
monitor’s internal speaker
Step 4.
Attach your “ PC Source ” to the back VGA
connector
Step 5.
Attach the mini stereo jack marked “ PC
Audio ” to your computer’s earphone jack
Touchscreen Installation
( 800 / 802 / 805 TSV Only )
Please download and install the Touchscreen
driver for your operating system from our
website WWW.XENARC.COM.
Attach the USB plug to your USB connector
Secure Knob Installation
Please use the attached knob and screws to fasten
the cable on the rear of cover
Note : Please use the included U-Shape metal bracket
to secure the 26-PIN Connector in applications where a lot of
vibration and movement are involved

Remote Control │ 7
1. Power Button : Turn the monitor ON or OFF.
2. Mirror Button : Enable or Disable the mirroring of the display.
Continue to press it and choose the mirroring you want.
3. Dimmer Buttom : Dim the brightness of the display by pressing this
key continuosly to set the brightness level of the display.
( Only available when auto sensor is disabled. )
4. Mute Button : Mute the speaker. Press again to restore the sound
of the speaker.
5. Display Button : Display the current input signal on the screen.
6. Sleep Button : Enable or Disable the sleep timer. Press this button
to select and set the time to turn off the monitor automatically.
7. Picture Button : Enable or select the picture mode you prefer.
Press this button and then you can select Standard, user, bright,
or soft.
8. PC auto Button : Enable to adjust the picture automatically,only
available in VGA mode.
9. Menu Button : Enable the OSD menu. Press this button again to
exit.
10. Source Button : Enable to switch to different source input.
11. Vol+ / Vol- Button : Increase or Decrease the Volume.
12. Up / Down Button ( ▲ / ▼ ) : Navigate Up or Down in OSDmenu.
13. Left / Right Button ( ◄ / ► ) : Navigate Left or Right in OSDmenu,
as well as decreasing or increasing the value of setting in OSD.
14. Enter Button : Confirm the setting or selection.

8 │ Remote Control
Instructions for remote controller shortcuts
1. Dimmer ( Adjust the brightness )
By pressing the Dimmer button, it will adjust the brightness level from
0, 20, 40, 60, 80 and 100.
Default is 100 ( Only available when auto sensor is disabled )
2. Sleep ( Set the sleep time out )
Select the time to automatically turn off the monitor.
The minimum is 15 minutes and the maximum is 120 minutes.
3. Picture ( Set the modes of the picture )
Enable to select the picture modes you prefer.
Press this button and then you can select standard, user, bright, or soft.
4. PC AUTO ( Auto adjust, only on VGA )
By pressing PC AUTO, it will auto adjust the image.
5. Source ( Select the source )
Press this button to select the input signal to display.
If one of these modes is disabled in OSD menu, please setup
under ( Function → Source Enable )

Remote Control │9
6. Mirror ( Image mirror )
Enable or Disable the mirroring of the display. Continue to press it
and choose the mirroring mode you wish to display.
7. Mute
Mute the speaker.
Press again to restore the sound of the speaker.
8. Display ( Display mode )
Display the current input signal on the screen.
9. VOL- / VOL+
Volume adjustment

10 │ Hardware Installation
Buttons description:
1. Power Button : Press to turn ON or OFF the monitor.
2. Select Button : Press to select the input signal to display.
Press the left ( ◄ ) or right ( ► ) to highlight the input source
desired and then press menu button to make the selection.
3. Menu Button : Press the button to show the OSDmenu.
And then press the left ( ◄ ) or right ( ► ) to navigate through
the menu.
Press “ Select ” button to go through a list of settings and
options.
Press the left ( ◄ ) or right ( ► ) buttons to change the values
of settings.
Press Menu button again to leave the OSD menu.
4. Right Button : Press this button to increase volume/dimmer or
the value of settings inside the OSD menu.
5. Left Button : Press this button to decrease volume/dimmer or
the value of settings inside the OSD menu.
6. Dimmer : This button controls display brightness.
OSD ( On-screen display ) Menu
Press MENU to display the OSD on the screen, then press
UP / DOWN ( or LEFT / RIGHT from the front control panel )
to highlight a different category. Press ENTER ( or Source ) to
adjust the selected highlighted category. Under the selected item
page, press UP / DOWN ( or Source ) to select the item from the
list, use LEFT / RIGHT to adjust. To select the sub-menu, please
press LEFT to enter to the sub-menu.