Xerox Nuvera 100 EA Instruction Manual

www.xerox.com Reference “About Xerox”
Product Safety Data Sheet XEROX
Product: Nuvera 100 EA Digital Production System PSDS No.: 0997
Nuvera 120 EA Digital Production System ISSUE DATE: 5/08/2007
REV. DATE:
Section I - Product Identification
Manufacturer's Name Emergency No. EH&S Inquiries
Xerox Corporation [phone] [phone]
Manufacturer's Address
Rochester, N.Y.
Product Designation Product Identifier:
Nuvera 100 EA Digital Production System Print Engine: ZJC-1
Nuvera 120 EA Digital Production System Feeder & Scanner: ZJC-2
Multifunction Finisher: ZJC-3
Section II - Electrical Information
Line Voltage Line Current Freq. Branch Cir. Protection
(Volts) (Amps) (Hertz)(Amps)
Print Engine 115-127/200-220 24A or 40A 50/60 30A or 50A
Feeder 200-240 10A 50/60 20A
Finisher: 200-240 8A 50/60 20A
Line Cord/Plug Specification Power Consumption(Watts)
Running: 3402
Print Engine: 24A - Two phase, 3 wire + PE Standby: 592
NEMA 14-30P Plug (Single Cord) Sleep Mode: 100
Or Print Engine: 40A - Two phase, 3 wire +PE
NEMA 14-50P Plug (Single Cord)
Feeder, Finisher: Single phase, 2 wire + PE
NEMA 6-20P Plug (Single Cord)
Agency Approvals
UL & cUL: E51242 – UL 60950-1, First Edition
CE: IEC 60950-1 (2001) First Edition
Section III - Supplies
Xerox Part No. Material Safety Data Sheet
EA Black Dry Ink 6R1261/6R90357/502S67796 P-7006
EA Developer 502S31863 B-2012
Section IV - Environmental Information
Product Size Heat Emission* Environmental Limitations
(Inches) (BTU/HR) Min Max
D: 29.0” Running: 11,600 Relative Humidity (%) 15 85
W: 83.5” Standby: 2018 Ambient Temp. (oC) 10 32
H: 61”
Floor Space Requirements Weight
(inches) 112” D, 94” W, 74” H 1,283 (Lbs.) / 582 kgs
(Common configuration – see Installation Guide for more information on other product configuration

All measurements were made on products performing within established operating specifications and received
recommended maintenance procedures. Xerox certifies that this product meets or exceeds the applicable standards for
safety and emissions. www.xerox.com Reference “About Xerox”
Product: Nuvera 100 EA Digital Production System PSDS No.: 0997
Nuvera 120 EA Digital Production System
Section V - Emission/Exposure Information
Light Source FDA Accession No.
Class 1 laser system for xerographic exposure. 0320931-00
There is no access to laser light during
operation/maintenance or service.
Electromagnetic Emissions
US FCC: Class A
Canada DOC: Class A
Audible Noise
Run dBA: 64 Bel(A): 8.1
Standby dBA: 40 Bel(A): 5.7
Impulse dBA: 70
Chemical Emission Testing per ECMA 328
Ozone – 0.02 mg/m3
Concentration Based on Simulation Model:
Daily Copy Volume 57,600 impression / 8 hours
Room Size 47 m3
Particulates – 0.025 mg/m3
TVOC’s – 0.009 mg/m3
Section VI - Product Recycling and Disposal
Xerox operates a worldwide equipment takeback and reuse/recycle program. Contact your Xerox
sales representative (1-800-ASK-XEROX) to determine whether this Xerox product is part of the
program. For more information about Xerox environmental programs, visit
www.xerox.com/environment.
If you are managing the disposal of your Xerox product, please note that the product contains
lead, mercury and other materials whose disposal may be regulated due to environmental
considerations. The presence of lead and mercury is fully consistent with global regulations
applicable at the time that the product was placed on the market. For recycling and disposal
information, contact your local authorities. In the United States, you may also refer to the
Electronic Industries Alliance web site: www.eiae.org.