Xiaomi Mi Smart Band 7 NFC User manual

Smart Band 7 NFC User Manual

When using the band to measure your heart rate, please keep
your wrist still.
The band has a water resistance rating of 5ATM (50 meters in
depth). It can be worn in the swimming pool, while swimming near
the shore, or during other shallow-water activities. However, it
cannot be used in hot showers, sauna, or diving. Furthermore,
currents during water sports. The water-resistant function is not
permanent and may decline over time.
The touchscreen of the band does not support underwater
operations. When the band comes into contact with water, use a
During daily use, avoid wearing the band too tightly and try to
keep its contact area dry. Please clean the wristband regularly
with water.
Please stop using the product immediately and seek medical
assistance if the contact area on your skin shows signs of redness
or swelling.
This band is not a medical device, any data or information
provided by the band should not be used as a basis for diagnosis,
treatment, and prevention of diseases.
1
Precautions

and regulations.
or
fluid leakage. Do not expose it to sunlight, fire, or environments
where the ambient temperature is extreme heat.
When planning not to use the band for a long time, turn it oand
then put it away. To avoid damage caused by the over-discharge
2

3
by yourself.
environment that can result in an explosion or the leakage of
flammable liquid or gas.
in an explosion or the leakage of flammable liquid or gas.

4
Product Overview
Read this manual carefully before use, and retain it for future
reference.
Note: Illustrations of product, accessories, and user interface in
the user manual are for reference purposes only. Actual product
and functions may vary due to product enhancements.
Fitness Tracker
Touchscreen Heart Rate Sensor
Charging Port
Wristband Charging Cable

5
How to install
1.
2.
Insert one end of the fitness tracker into the slot from the
front of the wristband.
Press down on the other end with your thumb to push the
fitness tracker completely into the slot.

6
Wearing
1.Comfortably tighten the band around your wrist about
one-finger width away from your wrist bone.

7
Too loose Just right
2.
If the band can easily move
up and down the wrist, or the
heart rate sensor cannot
collect the data, try
tightening the wristband.
The band can comfortably fit
around the wrist.
To achieve the optimal performance of the heart rate sensor,
make sure the back of the band to contact with your skin.
When wearing your wristband, keep it neither too tight nor
too loose but leaving some space for the skin to be able to
breathe. Tighten the wristband before you start to exercise

8
Connecting with APP
1.Scan the QR code to download and install the app. Add the
Xiaomi Smart Band 7 NFC to the app first before you start
using it.
2. Log into your Xiaomi account in the app, and follow the
instructions to connect and pair the band with your phone.
Once the band vibrates and a pairing request is displayed on
its touchscreen, tap to complete the pairing with your phone.
Note: Make sure the Bluetooth on your phone is enabled. Hold
the phone and the band close to each other during pairing.

9
How to Use
tracking and analyzing your daily activities and sleeping habits.
Tap the touchscreen to light it up.
Swipe up on the touchscreen to choose from functions, and
swipe down on the touchscreen to view notifications.
shortcut.
Swipe up on the touchscreen
to choose from functions.
Swipe down on the
touchscreen to view
notifications.
touchscreen to quickly
select a shortcut.

10
Disassembling
Remove the band from your wrist, hold on to each end and pull
on the wristband until you see a small gap between the fitness
tracker and the wristband. Use your finger to pop the fitness
tracker out of its slot from the front side of the wristband.

activate the bank card based on your needs. Then follow the
password. When you complete the activation of the bank card,
you can use the NFC payment function via the band. Remember
to place the band close to the middle of the reader when doing
the payment.
Note:
The available bank card services are dependent on the
corresponding banks of the city you live in, and the actual
functions are subject to the services provided by the bank
of the activated bank card.
11
Activating the NFC-enabled Bank Card

12
Charging
When using the band for the first time, connect it to the charging
cable to turn it on.

Product: Smart Band
Name: Xiaomi Smart Band 7 NFC
Model: M2130B1
Fitness Tracker Net Weight: 13.8 g
Item Dimensions: 46.5 × 20.7 × 12.25 mm
Wristband Material: Thermoplastic elastomer
Clasp Material: Aluminum alloy
Adjustable Length: 160–224 mm
Compatible with: This product only supports certain Android or
iOS systems. For detailed information, please check the product
page on www.mi.com .
Input Voltage: DC 5.0 V
Input Current: 250 mA Max.
Water Resistance: 5ATM
Operating Temperature: 0°C to 45°C
Bluetooth Frequency: 2402–2480 MHz
Max. Output: ≤13 dBm
Wireless Connectivity: Bluetooth® Low Energy 5.2
NFC Frequency: 13.553–13.567 MHz
NFC Max. Output: < 42 dBuA/m @10m
13
Specifications
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Xiaomi Inc. is under license. Other trademarks and trade names
are those of their respective owners.

WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical
and electronic equipment which should not be mixed
with unsorted household waste. Instead, you should
protecthuman health and the environment by handing
over your waste equipment to a designated collection
point for the recyclingof waste electrical and electronic
equipment, appointed by the government or local
authorities. Correct disposal and recycling will help
prevent potential negative consequences to the
environment and human health. Please contact the
installer or local authorities for more information
about the location as well as terms and conditions
of such collection points.
14
EU Declaration of Conformity
Hereby, Anhui Huami Information Technology Co., Ltd.
declares that the radio equipmenttype M2130B1 is
in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the
followinginternetaddress:

15
Warranty Notice
THIS LEGAL WARRANTY NOTICE INFORMS YOU ABOUT YOUR RIGHTS
UNDER THE LEGAL WARRANTY. FOR A FULL UNDERSTANDING OF
YOUR RIGHTS YOU ARE INVITED TO CONSULT THE LAWS OF YOUR
COUNTRY, PROVINCE OR STATE. The duration and conditions related
to the legal warranties are provided by respective local laws. For more
information about the consumer warranty benefits, please refer to
If youhave purchased the Product directly from Xiaomi. In all other cases,
please consult your seller. There is no guarantee that the operation of
the Product will be uninterrupted or error free. Damages arising from
non-compliance with the instructions related to the use of the Product
are excluded. If a hardware defect is found within the Warranty period,
the Product will be either (1) repaired, (2) replaced, or (3) refunded,
depending on your rights under local laws. Normal wear and tear, force
majeure, abuse or damage caused by the user's negligence or fault are
any person in Xiaomi's authorized service network, Xiaomi's authorized
distributors or the final vendor who sold the Products to you.
The present warranty does not apply in Hong Kong and Taiwan.
Products which were not duly imported and/or were not duly
manufactured by Xiaomi and/or were not duly acquired from Xiaomi or
a Xiaomi’s official seller are not covered by the present warranties. As
per applicable law you may benefit from warranties from the non-official
retailer who sold the Product. Therefore, Xiaomi invites you to contact
the retailer from whom you purchased the Product.

16
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Anhui Huami Information Technology Co., Ltd.
(a Mi Ecosystem company)
Address: 7/F, Building B2, Huami Global Innovation Center,
No. 900, Wangjiang West Road, High-tech Zone, Hefei City,
China (Anhui) Pilot Free Trade Zone
For further information, please go to www.mi.com
For regulatory information, product certification, and compliance
System > Regulatory.
Importer:
Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz