Xiaomi realme TechLife Watch S100 User manual

1
realme TechLife Watch S100
Quick Start Guide
- This guide contains important information. Please read
carefully before using the product -

2
Product Description
Instructions for use
1. Enter pairing mode
Press and hold the power button on the side to power on.
2. Download realme Fit
Search realme Fit in Google Play Store (Android) or App Store

3
(iOS), or scan the QR code to download realme Fit.
3. Set up and pair
Tap the icon in realme Fit to add device. Select realme TechLife
Watch S100 in nearby devices, or scan the QR code on the
watch screen to pair up with the watch.
4. On home screen
Swipe up to browse applications
Swipe down to view notifications
Swipe right to view the status bar
Swipe left to view function
Press and hold to change the watch face

4
5. Button
5.1 Press once
Wake the watch
Turn off the screen at home screen
Return to the previous screen in an app
Pause or resume workout
5.2 Press and hold
Power on, off
about 15s force restart
6. Charging
To charge the watch, place the watch on the charging base.
Make sure both metal pads on the back of the watch are
aligned with the metal tips on the base.

5
7. Change bands
Slide the spring pin and hold it to remove a band from the
watch or attach a band to the watch.
8. Wearing a Watch
Please refer to the figure to wear the Watch about 1 cm away
from the wrist bone, and adjust the tightness of the wrist strap

6
to ensure the heart rate sensor can collect data properly. Do
not wear it too tightly or loosely, otherwise it will affect the
accuracy of heart rate sampling.
Attention:
•The Band can be worn on the left or right hand, which does not affect the
normal sampling and accuracy of sports and health data
•Please ensure that the back of the Band is clean and tidy, sweat and dirt on the
surface affect the comfort of wearing and the accuracy of health data
9. Health related
Daily Activities:
The TechLife Watch S100 automatically syncs relevant data,
such as your step count, exercise duration, calories burned,
and time spent standing, with daily exercise data
By tapping the “Daily Activities” icon on the watch, as
shown in Image (1), you can view data by sliding the page up
or down, as shown in image (2) (3) (4)

7
(1)
(2)
(3)
(4)
Heart Rate:
Tap the “Heart Rate” icon after putting on the watch as
shown in the “How to wear the watch” section of this
document. The watch can monitor your current heart rate in
real time and allow you to view detailed data on your heart
rate throughout the day. See Image (1)
(1)

8
Blood Oxygen:
The TechLife Watch S100 can measure your blood oxygen
saturation via a sensor, letting you know the state of your
body at any moment, as shown in Image (1) (2) (3)
(1)
(2)
(3)
Sleep:
Put on the watch before going to sleep to measure your
sleeping condition at night. After waking up, you can open
“Sleep” in the watch and view your sleep status from the
previous night. You can also view details about your sleep in
the app. See Image (1) (2)
(1)
(2)

9
Turn on the switch that measures blood oxygen during sleep
in the “realme Fit” app, and the watch will measure the
quality of your breathing in real time while you sleep.
10. Exercise Related
Freestyle Training:
The TechLife Watch S100 will measure data about your
exercise while you train. Swipe right lightly to pause or end
the exercise. See Image (1) (2)
(1)
(2)
Rich analysis of exercise data:
The “TechLife Watch S100” app will automatically sync with
your watch’s exercise records. More exercise details can be
viewed in the app under exercise.
11. Customizing the watch face
From the watch face screen, long press the current watch face,
then swipe left and right to browse. When you find a watch
face you like, tap it to switch. When the screen illuminates

10
again, the watch face you selected will appear, as shown in
Image (1) (2) (3)
Watch faces can also be switched by going to the “realme Fit”
app > Watch Face Settings while the phone and watch are
connected.
(1)
(2)
(3)
Change the watch face style:
Long press the watch face to enter the watch face editing
page.
Tap on Select a Style, which will send you to the watch face
interface and display Select a Watch Face.
Tap on the Non-Functional Widget in Editing Mode or press
the “right side button” to exit Editing Mode.
The watch face style can also be switched by going to the
“realme Fit” app > Watch Face Settings while the phone and
watch are connected.

11
12. Other Problems
Connected
Not connected
Do not disturb
Adjust brightness level
Lift wrist to
brighten screen
Flashlight
Settings