XO Vision X358 User manual

NOTE: This equipment has been tested and found to comply with the limits f0r a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, maybe cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Delete
Move logo right to center

purchasing an XO Vision receiver.
use
or block
Bend

BT

When the unit is on,
of
entering
to insert an
is out,
view angle.
is out,
In
In
In
In

B
T
Plug
into
a USB
into
file
an SD
into
file
the disc
a disc
mode.
In
to frequencies that are broadcasting.
go to the next or previous track.
Press
In
Choose the
downward.
to channels that are broadcasting.
go to the next or previous track being played from your device.

BT
BT
In
has
In
In
press & hold
displayed)
In
file type,
depending on the
press

Remove this logo
from manual and
from actual unit.
CONTROL
operation mode.
toggle mute.
scanning
scanning
cycle is

BT
stop
station is
has
memory.
to
In
In
when the
signal is
There
In
is made
In
the next
previous track
In
press
In
In
In
In
press
source
file type,
displayed)
press
in
press
mute
In

In
file types,
In
available.
in
In
in
In
that are
In
set.
In
press
the screen.
In
press
appears
Use the
select
lock is
in
In
the
Use the
In
In
In
This page seems to be the same as page 17. Should it be deleted?