Xterra AIR350 User manual

AIR350 Airbike
OWNER’S MANUAL
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW Airbike

Table Of Contents
1
2
3
4
13
14
15
16
WARRANTY COMPLIANCE
THIS INDOOR CYCLE IS INTENDED FOR RESIDENTIAL USE ONLY AND IS
WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS
WARRANTY IN ITS ENTIRETY.
Product Registration
Important Safety Instructions
Important Operation Instructions
AIR350 Assembly Instructions
Final Preparations
Exploring Your New Bike
Troubleshooting
Manufacturer’s Limited Warranty

AIR350 AIRBIKE
1
Record Your Serial Number
Please record the Serial Number of this tness product
in the space provided below.
Serial Number
Register Your Purchase
The self-addressed product registration card must be completed in full and returned to
XTERRA Fitness. You can also go to www.xterratnessstore.com/warrantyreg.html
to register online.
Thank you for your purchase of this quality indoor cycle. Your new Airbike has been
manufactured by one of the leading tness manufacturers in the world and is backed by one
of the most comprehensive warranties available. XTERRA Fitness will do all we can to make
your ownership experience as pleasant as possible for many years to come.
If you have questions, or if parts are missing or damaged, or you require customer service,
call [phone]. Please have your model number and serial number handy when you call.
Please take a moment to record where you purchased your machine, as well as the date of
purchase for future reference. We appreciate your condence in XTERRA Fitness and we
will always remember that you are the reason that we are in business. Please complete and
mail your registration card today and enjoy your new Airbike.
Yours in Health,
XTERRA Fitness
Congratulations On Your New Airbike and Welcome to the XTERRA Fitness Family!
Product Registration
AIR350_20190613
Version 2.0
Purchase Location
Purchase Date

2
AIR350 AIRBIKE
WARNING - Read all instructions before using this appliance.
1. Use this equipment only for its intended use as described in this manual. Do not
attempt to ride this bike at high pedal speeds until you have ridden the bike for some
time and are comfortable riding at slower pedal speeds.
2. Wait for ywheel to coast to a stop before dismounting the bike.
3. Serious injury or death may occur from over-training. Consult a medical doctor or
qualied tness instructor to determine an exercise program appropriate for your level
of tness.
4. Do not attempt to turn the pedal cranks by hand. Do not touch any driving mechanism
while it is in motion as possible injury could occur.
5. In a home setting, keep children away from the bike when it is not in use. Keep
children and pets away from the unit while it is in use.
6. Do not attempt to perform dip movements on handlebars.
7. Never drop or insert any object into any opening of the bike.
8. Only use the bike on a stable, level oor.
9. Follow instructions for safe use of the equipment including proper seat position,
handlebar position, and use of foot positioning system of pedals. Do not attempt to
pull up handlebar post and seat post over the ‘MAX.’ graduation.
10.For safe operation, allow for at least 1 foot (30cm) of free space to either side of the
unit and 2 feet (60cm) of free space to the rear of the unit.
11. Weight Limit: 250 lbs.
Regularly examine the bike for damage and wear. Inoperable components should be
replaced immediately or the equipment should not be used until it is repaired.
Failure to follow all guidelines may compromise the effectiveness of the exercise
experience, expose yourself (and possibly others) to injury, and reduce the longevity
of the equipment.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
Important Safety Instructions
WARNING: This product can expose you to chemicals including Toluene and Acrylamide which
are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov

AIR350 AIRBIKE
3
1. Obtain a complete physical examination from your medical doctor and enlist a health/
tness professional’s aid in developing an exercise program suitable for your current
health status.
2. When working out for the rst time, start out slowly for a minimum of ve minutes.
After your muscles are warmed up, gradually increase the pedaling speed and/or
resistance.
3. The speed and duration of your exercise program should always be subject to how
you feel. Never permit peer pressure to exceed your personal judgment while
exercising.
4. This exercise equipment is not intended for use by persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge.
5. Overweight or severely de-conditioned individuals should be particularly cautious
when using the equipment for the rst time. Even though such individuals may not
have histories of serious physical problems, they may perceive the exercise to be far
less intense than it really is, resulting in the possibility of overexertion or injury.
6. Proper installation and regular maintenance are required to ensure user’s safety.
Maintenance is the sole responsibility of the owner.
Important Operation Instructions
WARNING - AS THE OWNER OF THIS EXERCISE EQUIPMENT, YOU SHOULD
INSIST THAT ALL USERS FOLLOW THE SAME GUIDELINES: YOU SHOULD MAKE
THIS MANUAL AVAILABLE TO ALL USERS.

4
AIR350 AIRBIKE
AIR350 Assembly Pack Checklist

AIR350 AIRBIKE
5
AIR350 Assembly Pack Checklist
Part No. Description Q’TY
1 Main Frame 1
2/3 Handrail Arm 1/1
4Lower Handrail Arm 2
5 Upright Post 1
6 Seat Post 1
7 Seat Slider 1
9 Front Stabilizer 1
10 Rear Stabilizer 1
11 Computer 1
14/15 Foot Pedal 1/1
19 Seat 1
25 Cup Holder 1
59 Large Screw 2
80 Moving Shaft 1
User Manual 1
Hardware Parts 1

6
AIR350 AIRBIKE
AIR350 Assembly Pack Checklist
Grease

AIR350 AIRBIKE
7
Upright and Console
1
1. Place 2 AAA batteries into the Console (11).
2. Taking Upright Post (5) connect the Upper wire and Lower Wire. Be sure to not pinch
the wires or you may damage the cable.
3. Using 2 Screws (90) attach the Upright Post to the Main Frame (1).
4. Using 2 Screws (55) attach the Cup Holder (25) to the Upright Post (5).
5. Connect the Connection Wire (54) at the top of the Upright Post (5) to the wire of the
Console (11). Feed any extra length of wire back into the Upright Post(5), then use 4
Screws (58) to mount the Console (11) to the Upright Post (5).

8
AIR350 AIRBIKE
Attaching the Stabilizers
2
1. Using 2 sets of Screws (57) and M8 Washers (69) attach the Front Stabilizer (9) to
the Main Frame (1).
2. Repeat the same steps to attach the Rear Stabilizer (10) to the Main Frame (1).

AIR350 AIRBIKE
9
Left & Right Handlebars
3
1. Using 2 Screws (76), 2 Arc Washers (89), and 2 Spring Washers (88) attach the Left
Handrail Arm (3) to the Lower Handrail Arm (4). Then secure with 2 Nylon Nuts (71).
2. Repeat this process to attach the parts of the Right Handrail Arm (2).
Note: When connecting the Upper Arms to the Lower Arms the Powder Washer (70) is
on the outside of the arms, And the connection points labeled “A” in the diagram above
should face inwards towards each other.

10
AIR350 AIRBIKE
Connecting the Handlebars
4
1. Please apply some of the included grease to the Large Screw (80) before assembly.
2. Attach the Left & Right Handrail Arms (3 & 2) to the Main Frame (1) by rst sliding the
Large Screw (80) through the Right Handrail Arm (2) and placing 1 Wave Washer (61) and
1 D Washer (35) against the Large Screw. Then place the Right Handrail Arm (2) at the
connection point on the Main Frame (1). Tighten the screw in the direction as shown in the
illustration above with the Allen Wrench (93).
3. Tightening the Large Screw (59): Insert the Wrench into the holes on the Large Screws
(59) and turn them in opposite directions to thoroughly tighten the Large Screw (59).

AIR350 AIRBIKE
11
Foot Pedals
5
1. The Left Pedal (14) and the Left Lock nut (75) have reverse threading and have to be turned
counter clockwise to tighten. Apply some of the included grease to the bolt of Left and Right
foot pedal (14&15) before assembly. Turn the Belt pulley with Crank (18) to the front to make it
horizontal.
2. Insert the Left Foot pedal (14) through the Washer (72), Wave washer (92), the Connection
piece (8) and into the Crank. Turn the Left pedal (14) counter clockwise as tightly as you can
with your hands. Make sure the bolt on the Left pedal (14) penetrates the crank fully. Lock the
Left pedal (14) with the Left Lock nut (75). Finish tightening with the Wrench (93).
3. Repeat on the Right side making sure to turn the pedal clockwise.

12
AIR350 AIRBIKE
Dis-assembling and Assembling the Seat
6
1. Unscrew 3 Washers (69) and 3 Nylon Nuts (71) from the Seat (19) using the
Wrench (93).
2. Attach the Seat (19) to the Seat Slider (7) with Washers (69) and Nylon Nut (71).
3. Attach the Seat Slider (7) to the Seat Post (6) with Knob (22) and M10 Washer
(77).
4. Insert the Seat Post (6) into the Main Frame (1) and lock it at desired height with
the Adjustment Knob (24).
CHECK ALL BOLTS AND NUTS ARE TIGHTENED BEFORE USING THE MACHINE.

AIR350 AIRBIKE
13
Final Preparations
• Tighten all bolts/nuts securely to complete your installation.
• Adjust all four feet so your unit sits at on the ground for a stable ride. If placing on a mat or on
carpet, then it may take time for your unit to settle into the oor padding and will not feel as stable as if
placed on a hard surface.
• Make sure to tighten both pedals securely to the pedal crank arms as instructed.
• Once proper seat and handlebar height is selected, make sure to tighten securely for a solid feel.
Adjustment Of Seat Position
Seat Height Adjustment
1. Standing next to the bike, adjust the seat until it is about hip height.
2. Rotate the crank arms until the pedals are in the vertical position: 12
and 6 o’clock.
3. Place your foot on the pedal closest to the oor and mount the bike.
Ensure that the ball of your foot is over the center of the pedal. Your
leg should be slightly bent at the knee, about 5 degrees.
4. If your leg is too straight or your foot cannot touch the pedal you will
need to lower the seat height. If your leg is bent too much, you will
need to raise the seat height.
5. Dismount the bike. Then loosen the knob on the seat post and adjust
up or down as necessary.
6. When the seat is in the desired position, tighten the quick release to
secure the seat post.
7. Note the nal position mark on the seat post for future reference.
Seat Forward/Back Adjustment
8. Sit on the bike with the crank arms in the 3 and 9 o’clock positions.
A proper forward/back position (for road bike training) of the seat is
achieved when the small bump at the top of your shin is above the
pedal axle.
9. Dismount the bike. Loosen the knob under the seat and slide the seat
forward or backward as desired; tighten the knob.
Adjusting The Bike For A Proper Fit
Take some time to learn how to properly adjust the bike to your body; it will make your
workouts more pleasant and a safer experience, too. Riding the bike when it is incorrectly
adjusted can result in discomfort and increase your risk of injury.

14
AIR350 AIRBIKE
AIR350 Console
Button Functions
MODE: Press to select functions. Press the button and hold for two seconds to reset all
functions to zero, except ODOMETER.
SET: In the STOP mode, press to set target values for TIME, CALORIES, and DISTANCE.
Press the button and hold for two seconds. The value will increase automatically even if you are
not holding the SET button. Press any button to stop.
RESET: In the STOP mode, press the button to reset the setting values to zero.
Press the RESET button and hold for two seconds to reset all functions to zero, except
ODOMETER.
Getting Familiar with the Control Panel
Exploring Your New Bike
Functions TIME 0:00 ~ 99:59 (Minute:Second)
SPEED 0 ~ 999.9 K per hour
CALORIES 0.0 ~ 999.99 ~ 9999 Kcal
DISTANCE 0.1 ~ 999.9 K
BATTERY TYPE (2) Two AAA
OPERATING TEMPERATURE 0˚C ~ 40˚C; 32˚F ~ 104˚F
STORAGE TEMPERATURE -10˚C ~ 60˚C; 14˚F ~ 140˚F

AIR350 AIRBIKE
15
Key Functions
Troubleshooting
Button Functions
SCAN: Press the MODE button until “SCAN” appears on display. The console displays TIME,
CALORIES, ODOMETER, SPEED, and DISTANCE in a sequence for 6 seconds at a time.
TIME: Displays the time elapsed or can count down from preset value.
CALORIES: Displays the calories burned or can count down from preset value.
The calorie readout is an estimate for an average user. It should be used only as comparison
between workouts on this unit.
ODOMETER: Display the total accumulated distance you have traveled. The odometer does
not reset unless you remove the batteries.
SPEED: Displays the current speed.
DISTANCE: Displays distance or can count down from preset value.
The Console turns on when you start pedaling or when you press a key.
The Console turns off automatically after 4 minutes of inactivity.
Countdown Function
You can preset values to countdown TIME, CALORIES or DISTANCE. Press MODE until
the function you want is displayed. Make sure meter is not in SCAN. Press SET to increase
the value. If you press SET and hold for a few seconds, the value will increase automatically.
Press any key to stop at a value.
Problem Solution
When display shows all 0’s, faded numbers,
incomplete numbers or blank screen
• Remove the computer and check
the wire that comes from the computer is
properly connected to the wire that comes
from the upright.
• Check that the batteries are correctly
positioned and are in proper contact with the
battery springs.
• The batteries in the computer may
be dead. Remove and replace with new
batteries.

16
AIR350 AIRBIKE
Manufacturer’s Limited Warranty
Effective June 13, 2019 - AIR350 Airbike LIMITED WARRANTY
XTERRA Fitness Inc. warrants all its home use Airbike parts for a period of time listed below, from the date of retail sale, as determined by a
sales receipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date. XTERRA Fitness’s
responsibilities include providing new or remanufactured parts, at XTERRA Fitness’s option, and technical support to our independent
dealers and servicing organizations. In the absence of a dealer or service organization, these warranties will be administered by XTERRA
Fitness directly to a consumer. The warranty period applies to the following components:
Home Use Limited WARRANTY
NORMAL RESPONSIBILITIES OF THE CONSUMER
This warranty applies only to products in ordinary household use. The consumer is responsible for the items listed below:
1. The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original purchase
to validate the manufacturer’s limited warranty or register online at http://www.xterratnessstore.com/warrantyreg.html.
2. Proper use of the Airbike in accordance with the instructions provided in this manual, including maintenance.
3. Proper connection to a power supply of sufcient voltage, replacement of blown fuses, repair of loose connections or defects in house/
facility wiring.
4. Expenses for making the Airbike accessible for servicing, including any item that was not part of the Airbike at the time it was shipped
from the factory.
5. Damages to the Airbike nish during shipping, installation or following installation.
EXCLUSIONS
This warranty does not cover the following:
1. CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES
RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY. Note: Some states do not allow the exclusion
or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.
2. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or defects in
workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call reimbursement period,
for Airbikes not requiring component replacement, or Airbikes not in ordinary household use.
3. Damages caused by services performed by persons other than authorized XTERRA Fitness service companies, use of parts other than
original XTERRA Fitness parts, or external causes such as alterations, modications, abuse, misuse, accident, improper maintenance,
inadequate power supply, or acts of God.
4. Products with original serial numbers that have been removed or altered.
5. Products that have been; sold, transferred, bartered, or given to a third party.
6. Products that are used as store display models.
7. Products that do not have a warranty registration on le at XTERRA Fitness, Inc. XTERRA Fitness reserves the right to request proof of
purchase if no warranty record exists for the product.
8. Product use in any environment other than a residential setting.
9. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
SERVICE
Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory shipping as
determined by the serial number establishes the warranty period should service be required. If service is performed, it is in your best interest
to obtain and keep all receipts. This written warranty gives you specic legal rights. You may also have other rights that vary from state to
state. Service under this warranty must be obtained by following these steps, in order:
1. Contact your selling authorized XTERRA Fitness dealer. OR
2. Contact your local authorized XTERRA Fitness service organization.
3. If there is a question as to where to obtain service, contact our service department at [phone].
4. XTERRA Fitness’s obligation under this warranty is limited to repairing or replacing, at XTERRA Fitness’s option, the product through
one of our authorized service centers. All repairs must be preauthorized by XTERRA Fitness. If the product is shipped to a service
center freight charges to and from the service center will be the customer’s responsibility. For replacement parts shipped while the
product is under warranty, the customer will be responsible for shipping and handling charges. For in-home service, the customer
will be responsible for a trip charge. There will be an additional trip charge if the customer is located over 100 miles from the nearest
service center.
5. The owner is responsible for adequate packaging upon return to XTERRA Fitness. XTERRA Fitness is not responsible for damages in
shipping. Make all freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT
A RETURN AUTHORIZATION NUMBER. All units arriving without a return authorization number will be refused.
6. For any further information, or to contact our service department by mail, send your correspondence to:
Product features or specications as described or illustrated are subject to change without notice. All warranties are made by
XTERRA Fitness, Inc. This warranty applies only in the 48 contiguous United States. NOTE: This does not apply to Alaska or Hawaii.
XTERRA Fitness, Inc.
P.O. Box 2037
Jonesboro, AR 72402-2037
Frame
1 Year
Parts Labor
1 Year None

AIR350 AIRBIKE
17
3000 Nestle Road Jonesboro, AR 72401 - Phone:[phone] - Fax:[phone]
www.xterrafitness.com ©2019 All Rights Reserved. AIR350 Owner’s Manual