Xterra TR 7.1 User manual

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING
YOUR NEW TREADMILL!
Owner’s Manual
Model No.
16004700710
- Assembly
- Operation
- Adjustments
- Parts
- Warranty
CAUTION:
You must read and
understand this
owner’s manual
before operating
unit.
Keep this manual for
future reference.
Serial number
Write the serial
number in the space
above for reference.
Serial number can be
found at the front
bottom section of the
Treadmill.

DyacoCanadaInc.2017 2 [email protected]
TABLE OF CONTENTS
Important Safety Instructions......................................................................4
Important Electrical Instructions .................................................................5
Important Operation Instructions...............................................................6
Assembly Instructions................................................................................7
Folding/Transport Instructions ..................................................................11
Treadmill Operation ..................................................................................12
Programmable Features ...........................................................................16
General Maintenance ..............................................................................27
Service Checklist - Diagnosis Guide .......................................................31
Exploded View Diagram..........................................................................32
Parts Lists ...............................................................................................33
Troubleshooting ......................................................................................36
Training Guidelines .................................................................................37
Manufacturer’s Limited Warranty ............................................................43
ATTENTION
THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED
FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS
ENTIRETY.

DyacoCanadaInc.2017 3 [email protected]
BEFORE YOU BEGIN
Thank you for choosing the XTERRA TR 7.1 Treadmill. We take great pride in producing this quality
product and hope it will provide many hours of quality exercise to make you feel better, look better, and
enjoy life to its fullest. It's a proven fact that a regular exercise program can improve your physical and
mental health. Too often, our busy lifestyles limit our time and opportunity to exercise. The XTERRA TR
7.1 Treadmill provides a convenient and simple method to begin your assault on getting your body in
shape and achieving a happier and healthier lifestyle. Before reading further, please review the drawing
below and familiarize yourself with the parts that are labeled.
Read this manual carefully before using the XTERRA TR 7.1 Treadmill. Although Dyaco Canada Inc.
constructs its products with the finest materials and uses the highest standards of manufacturing and
quality control, there can sometimes be missing parts or incorrectly sized parts. If you have any
questions or problems with the parts included with your XTERRA TR 7.1 Treadmill, please do not return
the product. Contact us FIRST! If a part is missing or defective call us toll free at 1-888-707-1880. Our
Customer Service Staff are available to assist you from 8:30 A.M. to 5:00 P.M. (Eastern Time) Monday
through Friday. Be sure to have the name and model number of the product available when you contact
us.
MAX. USER WEIGHT LIMIT 159 KGS (350 LBS)
Incline Adjustment Switch
Speed Adjustment Switch
Console
Safety Key
Upright
Running Belt
Main Frame
Wheels
On/Off Switch
Circuit Breaker
Power Cord
Adjusting
Bolt
Foot Rail

DyacoCanadaInc.2017 4 [email protected]
IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this equipment.
DANGER - To reduce the risk of electric shock, always unplug this treadmill from the electrical outlet
prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a
flat level surface with access to a 120-volt, 15-amp grounded outlet.
WARNING - Heart rate monitoring systems may be inaccurate. Over exercising may result in serious
injury or death. If you feel faint stop exercising immediately.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14 AWG OR BETTER, WITH ONLY ONE OUTLET ON
THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR
IN ANY WAY MODIFY THE CORD SET.
A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions
if applicable.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
It is the responsibility of the owner to ensure that all users of this treadmill are adequately
informed of all warnings and precautions.
Inspect and properly tighten all parts of the treadmill regularly.
Keep children under the age of 13 away from the treadmill. There are obvious pinch points and
other caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working properly,
call your dealer.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being
administered. Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
Do not use outdoors.
To disconnect, turn all controls to the off position and then remove the plug from the outlet.
Do not attempt to use your treadmill for any purpose other than for the purpose it is intended.
The hand pulse sensors are not medical devices. Various factors, including the user’s movement,
may affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise
aids in determining heart rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
This equipment is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the equipment by a person responsible for their safety.
Handicapped individuals should have medical approval and close supervision when using this
treadmill.
Never hold your breath while exercising. Breathing should remain at a normal rate in conjunction
with the level of exercise being performed. IF DIZZINESS, NAUSEA, CHEST PAINS, OR ANY
OTHER ABNORMAL SYMPTOMS ARE EXPERIENCED WHILE USING THIS EQUIPMENT,
STOP THE WORKOUT AT ONCE, CONSULT A PHYSICIAN IMMEDIATELY.
Children should be supervised to ensure that they do not play with the equipment.
Remove tether cord after use to prevent unauthorized treadmill operation.
Connect this treadmill to a properly grounded outlet only. See Grounding Instructions.
User weight should not exceed 350 lbs (159 kgs).
SAVE THESE INSTRUCTIONS - THINK SAFETY!

DyacoCanadaInc.2017 5 [email protected]
IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER use a RCD - Residual Current Device (U.S. ver.= GFCI) - wall outlet with this treadmill. As with
any equipment with a large motor, the RCD/GFCI will trip often. Route the power mains cord away from
any moving part of the treadmill including the elevation mechanism and transport wheels.
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%) or
more, the performance of your treadmill may be affected. Such conditions are not covered under your
warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for
proper testing.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near
a pool or spa, or in any other high humidity environment. The temperature specification is 40 degrees c,
and humidity is 95%, non-condensing (no water drops forming on surfaces).
Circuit breakers: Some circuit breakers are not rated for high inrush currents that can occur when a
treadmill is first turned on or even during normal use. If your treadmill is tripping the circuit breaker (even
though it is the proper current rating and the treadmill is the only equipment on the circuit) but the circuit
breaker on the treadmill itself does not trip, you will need to replace the breaker with a high inrush type.
This is not a warranty defect. This is a condition we as a manufacture have no ability to control. This
part is available through most electrical supply stores.
GROUNDING INSTRUCTIONS
This product must be grounded. If the treadmill’s electrical system should malfunction or breakdown
grounding provides a path of least resistance for electric current, reducing the risk of electric shock.
This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product if it will not fit the outlet; have a
proper outlet installed by a qualified electrician.
This product is for use on a nominal 120 volt/15 amp circuit, and has a grounding plug that looks like
the plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be
used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not
available. The temporary adapter should be used only until a properly grounded outlet, (shown below)
can be installed by a qualified electrician. The green colored rigid ear-lug, or the like, extending from
the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw.

DyacoCanadaInc.2017 6 [email protected]
IMPORTANT OPERATION INSTRUCTIONS
●NEVER operate this treadmill without reading and completely understanding the results of any
operational change you request from the computer console.
●NEVER use your treadmill during an electrical storm. Surges may occur that could damage
treadmill components.
●Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or stray
from walking in the center of the belt; which may result in serious injury.
●NEVER mount or dismount the treadmill while the belt is moving. Treadmills start with at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the
belt during slow acceleration is proper after you have learned to operate the unit.
●Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
●Never allow more than one person on the treadmill at once.
●Warm up 5 to 10 minutes before each workout and cool down 5 to 10 minutes afterward. This
allows your heart rate to gradually increase and decrease and will help prevent straining
muscles.
WARNING DECAL REPLACEMENT
The decal shown below has been placed on the treadmill. If the decal is missing or illegible,
please call our Customer Service Department toll-free at 1-888-707-1880 to order a
replacement decal.

DyacoCanadaInc.2017 7 [email protected]
ASSEMBLY INSTRUCTIONS
!!ATTENTION: IMPORTANT UNPACKING INSTRUCTIONS.
PLEASE READ BEFORE UNPACKING YOUR FOLDING TREADMILL!!
Serious injury could occur if this folding treadmill is not unpacked properly.
There is a Velcro strap installed around the treadmill base that prevents the treadmill from
unfolding accidentally during shipping. If this strap is not removed properly the treadmill could
spring open unexpectedly and cause injury if someone is standing near the treadmill when the
strap is removed.
To ensure your personal safety during removal of the shipping strap please make sure the
treadmill is positioned flat on the ground, in the orientation it would be in if you were using the
treadmill. Do not turn the treadmill up on its side while removing the shipping strap. This could
cause the treadmill’s folding mechanism to spring open. If the end of the Velcro strap (that you
need to grab to remove it) happens to be under the treadmill deck, reach under the deck to
grab it, but do not tilt the treadmill up to gain access to the strap end.
Unpack the treadmill and locate the hardware pack. The hardware pack contains tools and
hardware needed for the assembly of each step.

DyacoCanadaInc.2017 8 [email protected]
TR 7.1 ASSEMBLY PACK CHECKLIST
#103. M6 (66 × 86)
L Allen Wrench (1pc)
#102. Combination M5 Allen Wrench
& Phillips Head Screwdriver (1pc)
#80. Ø8 × 1.5m/m
Split Washer (4pcs)
#99. 5/16" × UNC18 × 1/2"
Hex Head Bolt (8pcs)
#44. Safety Key (1pc) #104. Lubricant (1pc)
#100. Ø8 × Ø18 × 1.5m/m
Flat Washer (8pcs)
#125. 5/16" × UNC18 × 3/4"
Button Head Socket Bolt (8pcs)
#90. 13L Wrench (1pc)

DyacoCanadaInc.2017 9 [email protected]
TR 7.1 ASSEMBLY INSTRUCTIONS
Step 1.
Remove the treadmill from the carton and lay it on a smooth level surface.
Step2.
Connect Computer Cable (Middle) (54) with Computer Cable (Lower) (55) then insert Right
and Left Uprights (4) and (5) into the Frame Base (2) and use 13m/m Wrench (90) to
tighten 8 pcs of 5/16" × UNC18 × 1/2"_ Hex Head Bolts (99) and 8pcs of Ø8 × Ø18 × 1.5T
Flat Washers (100).
99
55
99
99
100
100
99
99
100
100
100
100
100
99
99
99
100
54
90
4
5
2

DyacoCanadaInc.2017 10 [email protected]
Step 3
1. Connect the Computer Cable (Middle) (54) to the Computer Cable (Upper) (53).
2. Connect the Speed Adjustment Switch W/Cable (Upper) (114) to the Speed/Hand Pulse
Complex (28).
3. Connect the Incline Adjustment Switch W/Cable (Upper) (115) to the Incline/Hand Pulse
Complex (29).
4. Insert the Console Assembly (21) into the right and left Uprights (4) and (5) and secure
with 4 pcs of 5/16" × UNC18 × 3/4" Button Head Socket Bolts (125) with 4 pcs of Ø8 ×
1.5T Split Washers (80) by using the Combination M5 Allen Wrench & Phillips Head
Screwdriver (102).
54
53
102
125
125
4
5
21
80
80
114
115
28
29
Step 4.
Install the Handrail Support (9) between the left and right Uprights (5) and (4) and use the
Combination M5 Allen Wrench & Phillips Head Screwdriver (102) to tighten 4 pcs of 5/16" ×
UNC18 × 3/4" Button Head Socket Bolts (125).
102
125
125
9
Your unit is now fully assembled. Ensure all nuts and bolts are firmly tightened prior to use.

DyacoCanadaInc.2017 11 [email protected]
FOLDING INSTRUCTIONS
Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power
cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the
desired position.
■TO FOLD THE TREADMILL
Lift the deck until the latch clicks in place.
■TO UNFOLD THE TREADMILL
Press the tube with your foot at the yellow sticker
To release latch, see picture to the right.
TRANSPORTANTION INSTRUCTION
The treadmill is equipped with four transportation wheels. After folding simply roll the treadmill
away.

DyacoCanadaInc.2017 12 [email protected]
TREADMILL OPERATION
Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply
silicone spray or other substances to the walking belt or walking board. Such substances will
deteriorate the walking belt and cause excessive wear.
How to plug in the power cord.
GROUNDING INSTRUCTIONS.
This product must be grounded. No plug adapter should be used with this product.
WARNING:
Improper connection of the equipment grounding conductor can result in a risk of an electric
shock. Check with a qualified electrician if you are
in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the
product, if it will not fit the outlet; have a proper
outlet installed by a qualified electrician. The use of
an extension cord with this product is not
recommended. If an extension cord is needed, use
a short (less than 10 feet) heavy gauge (14 gauge
or better) extension cord with a three prong
(grounded) plug and receptacle.
IMPORTANT: If the power cord is damaged, it
must be replaced with a manufacturer
recommended power cord.
1. Plug the indicated end of the power cord into the
socket of the treadmill. See drawing below.
2. Plug the power cord into an appropriate outlet
that is properly installed and grounded. See
drawing below. Important: The treadmill is not
compatible with GFCI-equipped outlets.
Note: Your power cord and outlet may appear different

DyacoCanadaInc.2017 13 [email protected]
OPERATION OF YOUR TREADMILL
GETTING STARTED:
CAUTION: Before operating the console, read the following precautions:
Do not stand on the walking belt when turning on the treadmill.
Always wear the safety key. Pulling the safety key will stop tread-belt movement.
Adjust the speed in small increments to avoid sudden jumps in speed.
To reduce the possibility of electric shock, keep the console dry. Avoid spilling liquids on
the console and place only sealed water bottles in the water bottle holders.
Do not use excessive pressure on console control keys. They are precision set to
function properly with little finger pressure. Pushing harder is not going to make the unit
go faster or slower.
Understand that changes in speed and incline do not occur immediately. Set your
desired speed on the computer console and release the adjustment key. The computer
will obey the command gradually.

DyacoCanadaInc.2017 14 [email protected]
HOW TO USE THE SAFETY KEY
1. Place the safety key into position on the square metal portion of the console control head.
Your treadmill will not start and operate without this. Removing the safety key also secures the
treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power.
Note: The safety key has strong enough power to minimize accidental, unexpected stopping.
The clip should be attached securely to make certain it does not come off. The treadmill will
stop, depending on speed, with a one to two step coast anytime the magnet is pulled off the
console. Use the red Stop/Pause switch in normal operation.
TO OPERATE TREADMILL
CAUTION: To avoid injury, hold onto the handrails while mounting and dismounting the
treadmill. Hold onto the handrails and place feet on side rails before starting. Step onto the
walking belt only a slowest speed. Always hold on to a handrail or hand bar while making
control changes (incline, speed, etc.). Before operating the console make sure that the power
cord is properly plugged in and the on / off button is on. Attach the magnet end of the safety
key onto the monitor and attach the clip end of the safety key to your clothing (ie: waistband). If
you should slip or fall while exercising the safety key will pull out of the console, shutting off the
treadmill.
Getting started:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor hood.
WINDOW DISPLAY
Speed: Displays the current speed from starting at 0.5 mph to 12 mph.
(Display shows M, MI, ML means MPH）
Time: Displays your elapsed workout time in minutes up to 99:59.
Counts down from your preset target time to 0:00 during your workout.
Distance: Displays the distance traveled in miles.
Calories: Displays the cumulative calories burned at any given time during your
Workout. Note: This is a rough guide used for comparison of different
exercise sessions, which cannot be used for medical purposes.
Pulse: Displays the user’s current heart rate in beats per minutes during the
workout. To display your heart rate, you must hold both handrails.
Note: This is a rough guide used for comparison of different exercise
sessions, which cannot be used for medical purposes.
Incline: Displays the incline level during your workout from 0 to 12.
Program: Displays the program selected.
LAPS：Indicate number of turns of the athletic track. One turn is 0.4 km (1/4 mile)
with the range of 0~99 turns, resets when the value is over 99.
Audio System: There is an Audio Input Jack on the front of the console, and built-in
speakers. You may plug any low-level audio source signal into this port.
Audio sources include: MP3 player, iPod, portable radio, CD player or even
a TV or computer.
Fan: The fan is used to cool you down during your workout.

DyacoCanadaInc.2017 15 [email protected]
BUTTON FUNCTION
SPEED ▲(FAST)：Pressing this button increases the speed by 0.1 mph. Press and hold
this button for 3 seconds to increase speed rapidly. Press this button during setting the
program to adjust the value (to increase).
SPEED ▼(SLOW)：Pressing this button decreases the speed by 0.1 mph. Press and hold this
button for 3 seconds to decrease speed rapidly. Press this button during setting the program to
adjust the value (to decrease).
INCLINE ▲(UP)：Pressing this button increases the incline level by 0.5. Press and hold this
button for 3 seconds to increase the incline level rapidly. Press this button during setting the
program to adjust the value (to increase).
INCLINE ▼(DOWN)：Pressing this button decreases the incline level by 0.5. Press and hold
this button for 3 seconds to decrease the incline level rapidly. Press this button during setting
the program to adjust the value (to decrease).
ENTER: for program setting: Press this button to set weight, age, time.
PROGRAM: Press to select desired training.
START: Press this key to start treadmill at 0.5 mph start speed.
STOP: Press key once during training mode and treadmill will enter pause mode, slowing
down to a complete stop. Incline will also return to starting position while in pause mode. Press
start key again to resume training, resuming all set values (speed and incline) prior to entering
pause mode.
Pressing STOP key twice shows summary image. Pressing three times returns to idle mode.
FAN: Press key to turn on fan. There are three revolving speed with the fan, slow, medium and
fast.
MANUAL：Press this button to select the manual mode.
HILL: P17 shortcut built-in button
INTERVAL：P19 shortcut built-in button
STRENGTH：P25 shortcut built-in button
HR 1：Press this button to select the HR 1 mode.
HR 2：Press this button to select the HR 2 mode.
USER 1：Press this button to select the USER 1 mode.
USER 2：Press this button to select the USER 2 mode.
QUICK SPEED & INCLINE BUTTONS
Speed shortcut key：2 – 4 – 6 – 8 -10 mph to set the speed rapidly.
Incline shortcut key：2 – 4 – 6 – 8 – 10 to set the incline rapidly

DyacoCanadaInc.2017 16 [email protected]
PROGRAMMABLE FEATURES
The monitor offers 1 manual program, 30 pre-set programs, 5 user programs and 2 H.R.C.
programs.
Treadmill Operation
Quick-Start Operation:
STEP 1: Attach the Safety key to wake display up (if not already on).
STEP 2: Press the START button to begin belt movement after a three second count down.
Use the FAST/SLOW keys to adjust the desired speed at any time during training.
Using the UP/DOWN keys to adjust the Incline at any time during training.
STEP 3: Press the ENTER button to change the display to speed, incline and pace.
STEP 4: To get a pulse reading, simply grasp both stainless steel pick-ups. When the 
Icon is flashing that means the console is receiving a pulse. It may take a few
seconds for the display to reach the actual number.
STEP 5: While training, you can press STOP button to stop your workout or pull safety
key away from its position to shut down the computer. If you want to resume your
workout, you can press START button and all previous data will resume counting.
PROGRAMS
MANUAL
STEP 1: Use PROGRAM keys or directly MANUAL button to select the program, set the time
after entering the MANUAL mode.
STEP 2: Press START to begin the program.
STEP 3: During the program, you can adjust the speed and incline by pressing “FAST/SLOW
and “UP/DOWN” buttons, or use rapid keys to jump directly to a setting.
STEP 4: Press “STOP” button to stop your workout or pull safety key away from its position to
shut down the computer. The Stop button will pause the program the first time it is
pressed. Pressing STOP key twice shows summary image. Pressing three times
returns to idle mode.

DyacoCanadaInc.2017 17 [email protected]
PRESET PROGRAMS
STEP 1: PROGRAM a total of 30 programs, you can press HILL (P17) INTERVAL (P19)
STRENGTH (P25) shortcut keys to enter, you can also use the PROGRAM keys
FAST/SLOW (UP/DOWN) to select P1-P30. After selecting the program press
ENTER key to enter time setting.
STEP 2: Setting TIME: The preset value of time is 30 minutes, press FAST / SLOW key to
adjust time, you can press the START button to start directly after the adjustment.
STEP 3: During the program, you can adjust the speed and incline by pressing “FAST/SLOW
and “UP/DOWN” buttons, or use rapid keys to jump directly to a setting.
STEP 4: Press “STOP” button to stop your workout or pull safety key away from its position to
shut down the computer. The Stop button will pause the program the first time it is
pressed. Pressing STOP key twice shows summary image. Pressing three times
returns to idle mode.
Note: You may change the speed and incline while you are exercising (same as the
manual program) but the next segment of the program will resume to its original
position.
5 USER PROGRAMS
STEP 1: Press USER 1 or USER 2 shortcut buttons, or press PROGRAM button to select the
user 1 through 5, then press Enter.
STEP 2: Set your user name. Follow the directions in the message window.
STEP 3: The Message center will now be blinking a bodyweight value. Enter your bodyweight
and press Enter.
STEP 4: The Message center will now be blinking an Age value. Adjust the age and press
enter.
STEP 5: The message center will now be blinking on time. Use the FAST/SLOW button to
adjust the time up from 30 minutes (if desired). Press the Enter key. This is a must to
continue even if time is not adjusted.
STEP 6: The first column (segment) will now be blinking. Using the + or - keys, adjust the
speed level to your desired effort for the first segment then press enter. The second
column will now be blinking. Repeat the above process until all 20 segments have
been programmed. The first column will be blinking again. This is for the incline
programming. Repeat the above process to program all 20 segments for incline.
STEP 7: Press the Start button to begin the workout and also save the program to memory or
press Stop to go back one step to reprogram.

DyacoCanadaInc.2017 18 [email protected]
PRESET PROGRAMS
The treadmill has 30 different programs that have been designed for a variety of workouts.
These 30 programs have factory preset work level profiles for achieving different goals.
1234567891011121314151617181920 1234567891011121314151617181920
SPEED
P4
SPEED
P3
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
SPEED SPEED
P5 P6
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
P7 P8
SPEED SPEED
1234567891011121314151617181920 1234567891011121314151617181920
P10
SPEEDSPEED
P9
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
SPEED
P5
SPEED
P10
P7 P8
SPEED
P9
SPEED SPEED
SPEED
P1 P2
P3
SPEED
SPEED
P4
P6
SPEED SPEED

DyacoCanadaInc.2017 19 [email protected]
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
1 2 3 4 5 6 7 8 91011121314151617181920 1 2 3 4 5 6 7 8 91011121314151617181920
P13 P13
SPEED INCLINE
P14 P14
SPEED INCLINE
P15 P15
SPEED INCLINE
P11P11
SPEED INCLINE
P12 P12
SPEED INCLINE

DyacoCanadaInc.2017 20 [email protected]
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
INCLINESPEED
P17
P20
P18
SPEED INCLINE
SPEED INCLINE
P17
P18
SPEED INCLINE
P16 P16
P19 P19
SPEED INCLINE
P20