Yamaha VF150 User manual

Read this manual carefully before operating this
outboard motor.
OWNER’S MANUAL
VF150
VF175
LIT-18626-10-77
6EH-28199-32-E0
U6EH32E0.book Page 1 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

ZMU07696
Les gaz d’échappement du moteur de ce produit
contiennent des substances chimiques connues
dans l’État de Californie pour provoquer le cancer,
des anomalies congénitales et des troubles de la
reproduction.
Read this manual carefully before operating this outboard motor. Keep this
manual onboard in a waterproof bag when boating. This manual should stay
with the outboard motor if it is sold.
U6EH32E0.book Page 1 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Important manual information
EMU44141
To the owner
Thank you for selecting a Yamaha outboard
motor. This Owner’s Manual contains infor-
mation needed for proper operation, mainte-
nance and care. A thorough understanding of
these simple instructions will help you obtain
maximum enjoyment from your new Yamaha.
If you have any question about the operation
or maintenance of your outboard motor,
please consult a Yamaha dealer.
In this Owner’s Manual particularly important
information is distinguished in the following
ways.
: This is the safety alert symbol. It is used
to alert you to potential personal injury haz-
ards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
WARNING
EWM00782
A WARNING indicates a hazardous situa-
tion which, if not avoided, could result in
death or serious injury.
NOTICE
ECM00702
A NOTICE indicates special precautions
that must be taken to avoid damage to the
outboard motor or other property.
TIP:
A TIP provides key information to make pro-
cedures easier or clearer.
Yamaha continually seeks advancements in
product design and quality. Therefore, while
this manual contains the most current prod-
uct information available at the time of print-
ing, there may be minor discrepancies
between your machine and this manual. If
there is any question concerning this manual,
please consult your Yamaha dealer.
To ensure long product life, Yamaha recom-
mends that you use the product and perform
the specified periodic inspections and main-
tenance by correctly following the instruc-
tions in the owner’s manual. Any damage
resulting from neglect of these instructions is
not covered by warranty.
Some countries have laws or regulations re-
stricting users from taking the product out of
the country where it was purchased, and it
may be impossible to register the product in
the destination country. Additionally, the war-
ranty may not apply in certain regions. When
planning to take the product to another coun-
try, consult the dealer where the product was
purchased for further information.
If you purchased this outboard motor used,
see your Yamaha dealer to have it registered
in your name in Yamaha records.
TIP:
The VF150LA, VF150XA, VF175LA and the
standard accessories are used as a base for
the explanations and illustrations in this man-
ual. Therefore some items may not apply to
every model.
EMU44151
VF150, VF175
OWNER’S MANUAL
©2014 by Yamaha Motor Co., Ltd.
1st Edition, October 2014
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
Yamaha Motor Co., Ltd.
is expressly prohibited.
Printed in Japan
U6EH32E0.book Page 1 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Table of contents
Safety information............................. 1
Outboard motor safety.................... 1
Propeller ............................................. 1
Rotating parts..................................... 1
Hot parts ............................................ 1
Electric shock..................................... 1
Power trim and tilt .............................. 1
Engine shut-off cord (lanyard)............ 1
Gasoline ............................................. 2
Gasoline exposure and spills ............. 2
Carbon monoxide .............................. 2
Modifications...................................... 2
Boating safety ................................. 2
Alcohol and drugs .............................. 2
Personal flotation devices (PFDs) ...... 2
People in the water ............................ 2
Passengers......................................... 2
Overloading........................................ 2
Avoid collisions .................................. 3
Weather.............................................. 3
Accident reporting.............................. 3
Boat education and training............... 3
Passenger training ............................. 4
Boating safety publications................ 4
Laws and regulations ......................... 4
Boating organizations ..................... 4
Basic boating rules (Rules of the
road) ............................................. 5
Steering and sailing rules and sound
signals............................................. 5
Rules when encountering vessels...... 5
Other special situations...................... 6
General information .......................... 9
Identification numbers record ......... 9
Outboard motor serial number........... 9
Key number........................................ 9
C-Tick label and Manufactured
date label ..................................... 9
Compliance mark and
manufactured date label ............ 10
Read manuals and labels.............. 12
Warning labels ................................. 12
Specifications and
requirements ................................... 15
Specifications ............................... 15
Installation requirements .............. 16
Boat horsepower rating.................... 16
Mounting outboard motor ................ 16
Remote control requirements ....... 16
Battery requirements .................... 17
Specifications of Battery .................. 17
Mounting battery .............................. 17
Multiple batteries.............................. 17
Propeller selection ........................ 17
Start-in-gear protection ................ 18
Engine oil requirements ................ 18
Fuel requirements ......................... 19
Gasoline ........................................... 19
Gasoline Additives............................ 20
Muddy or acidic water .................. 20
Anti-fouling paint .......................... 21
Outboard motor disposal
requirements.............................. 21
Emergency equipment.................. 21
Emission control information ....... 21
Star labels ........................................ 22
Components.................................... 24
Components diagram ................... 24
Remote control box.......................... 27
Remote control lever ........................ 28
Neutral interlock trigger.................... 28
Free accelerator ............................... 28
Throttle friction adjuster ................... 29
Engine shut-off cord (lanyard) and
clip ................................................ 30
Main switch ...................................... 30
Power trim and tilt switch on remote
control........................................... 31
Power trim and tilt switch on bottom
cowling.......................................... 31
Trim tab with anode ......................... 32
Tilt support lever for power trim and
tilt model ....................................... 32
Cowling lock lever ............................ 33
U6EH32E0.book Page 1 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Table of contents
Flushing device ................................ 33
Fuel filter........................................... 34
Tilt support shaft (optional) .............. 34
Instruments and indicators ............ 36
Digital tachometer ......................... 36
Tachometer ...................................... 36
Trim meter ........................................ 36
Hour meter ....................................... 36
Low oil pressure-alert indicator........ 36
Overheat-alert indicator ................... 37
Digital speedometer ...................... 37
Speedometer.................................... 37
Fuel gauge........................................ 38
Trip meter / Clock / Voltmeter.......... 38
Fuel level-alert indicator ................... 39
Low battery voltage-alert
indicator ........................................ 39
Fuel management meter ............... 39
Fuel flow meter................................. 40
Fuel consumption meter / Fuel
economy meter / Twin engine
speed synchronizer....................... 40
Water separator-alert indicator ........ 42
6Y8 Multifunction meters .............. 42
6Y8 Multifunction tachometers ..... 42
Start-up checks................................ 43
Low oil pressure-alert....................... 43
Overheat alert................................... 44
Water separator alert........................ 44
Engine trouble alert .......................... 45
Low battery voltage-alert ................. 45
6Y8 Multifunction speed & fuel
meters ........................................ 46
6Y8 Multifunction
speedometers ............................ 47
6Y8 Multifunction fuel
management meters .................. 47
Engine control system .................... 49
Alert system .................................. 49
Overheat alert................................... 49
Low oil pressure alert....................... 49
Water separator alert........................ 50
Installation ....................................... 52
Installation..................................... 52
Mounting the outboard motor .......... 52
Operation ......................................... 54
First-time operation ...................... 54
Filling engine oil................................ 54
Breaking in engine............................ 54
Getting to know your boat ............... 54
Checks before starting engine...... 55
Fuel level .......................................... 55
Removing top cowling...................... 55
Fuel system ...................................... 55
Controls............................................ 56
Engine shut-off cord (lanyard) .......... 56
Engine oil.......................................... 56
Outboard motor................................ 57
Flushing device ................................ 57
Installing top cowling ....................... 57
Checking power trim and tilt unit ..... 58
Battery.............................................. 59
Filling fuel ..................................... 59
Operating engine .......................... 60
Sending fuel ..................................... 60
Starting engine ................................. 60
Checks after starting engine......... 62
Cooling water ................................... 62
Warming up engine....................... 63
Procedure for warming up engine.... 63
Checks after engine warm up....... 63
Shifting ............................................. 63
Stop switches................................... 63
Shifting.......................................... 63
Stopping boat ............................... 64
Stopping engine............................ 65
Procedure for stopping engine......... 65
Trimming outboard motor............. 65
Adjusting trim angle ......................... 66
Adjusting boat trim ........................... 66
Tilting up and down ...................... 67
Procedure for tilting up..................... 68
U6EH32E0.book Page 2 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Table of contents
Procedure for tilting down................ 70
Shallow water ............................... 71
Cruising in shallow water ................. 71
Operating in other conditions ....... 72
Maintenance .................................... 74
Transporting and storing outboard
motor.......................................... 74
Storing outboard motor.................... 74
Conditioning and stabilizing
gasoline......................................... 74
Procedure......................................... 74
Lubrication ....................................... 76
Cleaning and anticorrosion
measures ...................................... 76
Flushing cooling water passage....... 76
Cleaning the outboard motor ........... 77
Checking painted surface of
outboard motor............................. 77
Periodic maintenance ................... 77
Replacement parts........................... 78
Maintenance interval guidelines....... 78
Maintenance chart 1 ........................ 79
Maintenance chart 2 ........................ 81
Greasing........................................... 82
Inspecting spark plug....................... 84
Inspecting engine idle speed ........... 85
Changing engine oil.......................... 85
Inspecting wiring and connectors .... 90
Inspecting propeller ......................... 90
Removing propeller .......................... 91
Installing propeller............................ 92
Changing gear oil ............................. 93
Inspecting and replacing anodes..... 94
Inspecting the battery ...................... 95
Connecting the battery..................... 95
Disconnecting the battery ................ 96
Trouble Recovery ............................ 98
Troubleshooting ............................ 98
Temporary action in
emergency ............................... 101
Impact damage .............................. 101
Replacing fuse ............................... 101
Power trim and tilt unit will not
operate........................................ 102
Water separator-alert is activated
after leaving port......................... 102
Treatment of submerged
outboard motor........................ 104
Consumer information
(For North America) ...................... 105
YAMAHA FOUR-STROKE
OUTBOARD MOTOR
THREE-YEAR LIMITED
WARRANTY ............................. 105
IMPORTANT WARRANTY
INFORMATION IF YOU USE
YOUR YAMAHA OUTSIDE
THE U.S.A. OR CANADA......... 107
INDEX ............................................. 108
U6EH32E0.book Page 3 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

1
Safety information
EMU33623
Outboard motor safety
Observe these precautions at all times.
EMU36502
Propeller
People can be injured or killed if they come in
contact with the propeller. The propeller can
keep moving even when the motor is in neu-
tral, and sharp edges of the propeller can cut
even when stationary.
Stop the engine when a person is in the
water near you.
Keep people out of reach of the propeller,
even when the engine is off.
EMU40272
Rotating parts
Hands, feet, hair, jewelry, clothing, personal
flotation device (PFD) straps, etc., can be-
come entangled with internal rotating parts of
the engine, resulting in serious injury or
death.
Keep the top cowling in place whenever pos-
sible. Do not remove or replace the top cowl-
ing with the engine running.
Only operate the engine with the top cowling
removed according to the specific instruc-
tions in the manual. Keep hands, feet, hair,
jewelry, clothing, PFD straps, etc., away from
any exposed moving parts.
EMU33641
Hot parts
During and after operation, engine parts are
hot enough to cause burns. Avoid touching
any parts under the top cowling until the en-
gine has cooled.
EMU33651
Electric shock
Do not touch any electrical parts while start-
ing or operating the engine. They can cause
shock or electrocution.
EMU46150
Power trim and tilt
Body parts can be crushed between the out-
board motor and the clamp bracket when the
outboard motor is trimmed or tilted. Keep
body parts out of this area at all times. Make
sure that no one is in this area before operat-
ing the power trim and tilt mechanism.
The power trim and tilt switches operate even
when the main switch is turned to the “ ”
(off) position. Keep people away from the
power trim and tilt switches whenever work-
ing around the outboard motor.
Never get under the outboard motor while it
is tilted, even when the tilt support shaft is in-
stalled or the tilt support lever is locked. Se-
vere injury could occur if the outboard motor
accidentally falls.
EMU33672
Engine shut-off cord (lanyard)
Attach the engine shut-off cord so that the
engine stops if the operator falls overboard or
leaves the helm. This prevents the boat from
running away under power and leaving peo-
ple stranded, or running over people or ob-
jects.
Always attach the engine shut-off cord to a
secure place on your clothing or your arm or
leg while operating. Do not remove it to leave
the helm while the boat is moving. Do not at-
tach the cord to clothing that could tear
loose, or route the cord where it could be-
come entangled, preventing it from function-
ing.
Do not route the cord where it is likely to be
accidentally pulled out. If the cord is pulled
during operation, the engine will shut off and
you will lose most steering control. The boat
could slow rapidly, throwing people and ob-
jects forward.
U6EH32E0.book Page 1 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Safety information
2
EMU33811
Gasoline
Gasoline and its vapors are highly flamma-
ble and explosive. Always, refuel according
to the procedure on page 60 to reduce the
risk of fire and explosion.
EMU33821
Gasoline exposure and spills
Take care not to spill gasoline. If gasoline
spills, wipe it up immediately with dry rags.
Dispose of rags properly.
If any gasoline spills onto your skin, immedi-
ately wash with soap and water. Change
clothing if gasoline spills on it.
If you swallow gasoline, inhale a lot of gaso-
line vapor, or get gasoline in your eyes, get
immediate medical attention. Never siphon
fuel by mouth.
EMU33901
Carbon monoxide
This product emits exhaust gases which con-
tain carbon monoxide, a colorless, odorless
gas which may cause brain damage or death
when inhaled. Symptoms include nausea,
dizziness, and drowsiness. Keep cockpit and
cabin areas well ventilated. Avoid blocking
exhaust outlets.
EMU33781
Modifications
Do not attempt to modify this outboard mo-
tor. Modifications to your outboard motor
may reduce safety and reliability, and render
the outboard unsafe or illegal to use.
EMU33741
Boating safety
This section includes a few of the many im-
portant safety precautions that you should
follow when boating.
EMU33711
Alcohol and drugs
Never operate after drinking alcohol or taking
drugs. Intoxication is one of the most com-
mon factors contributing to boating fatalities.
EMU40281
Personal flotation devices (PFDs)
Have an approved PFD on board for every
occupant. Yamaha recommends that you
must wear a PFD whenever boating. At a
minimum, children and non-swimmers
should always wear PFDs, and everyone
should wear PFDs when there are potentially
hazardous boating conditions.
EMU33732
People in the water
Always watch carefully for people in the wa-
ter, such as swimmers, skiers, or divers,
whenever the engine is running. When some-
one is in the water near the boat, shift into
neutral and stop the engine.
Stay away from swimming areas. Swimmers
can be hard to see.
The propeller can keep moving even when
the motor is in neutral. Stop the engine when
a person is in the water near you.
EMU33752
Passengers
Consult your boat manufacturer’s instruc-
tions for details about appropriate passenger
locations in your boat and be sure all passen-
gers are positioned properly before acceler-
ating and when operating above an idle
speed. Standing or sitting in non-designated
locations may result in being thrown either
overboard or within the boat due to waves,
wakes, or sudden changes in speed or direc-
tion. Even when people are positioned prop-
erly, alert your passengers if you must make
any unusual maneuver. Always avoid jump-
ing waves or wakes.
EMU33762
Overloading
Do not overload the boat. Consult the boat
capacity plate or boat manufacturer for max-
imum weight and number of passengers. Be
sure that weight is properly distributed ac-
cording to the boat manufacturer’s instruc-
U6EH32E0.book Page 2 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Safety information
3
tions. Overloading or incorrect weight
distribution can compromise the boats han-
dling and lead to an accident, capsizing or
swamping.
EMU33773
Avoid collisions
Scan constantly for people, objects, and oth-
er boats. Be alert for conditions that limit your
visibility or block your vision of others.
Operate defensively at safe speeds and keep
a safe distance away from people, objects,
and other boats.
Do not follow directly behind other boats or
waterskiers.
Avoid sharp turns or other maneuvers that
make it hard for others to avoid you or un-
derstand where you are going.
Avoid areas with submerged objects or
shallow water.
Ride within your limits and avoid aggres-
sive maneuvers to reduce the risk of loss of
control, ejection, and collision.
Take early action to avoid collisions. Re-
member, boats do not have brakes, and
stopping the engine or reducing throttle
can reduce the ability to steer. If you are not
sure that you can stop in time before hitting
an obstacle, apply throttle and turn in an-
other direction.
EMU33791
Weather
Stay informed about the weather. Check
weather forecasts before boating. Avoid
boating in hazardous weather.
EMU44161
Accident reporting
Boat operators are required by law to file a
Boating Accident Report with their boating
law enforcement agency if their boat is in-
volved in any of the following accidents:
1. There is loss of life or probable loss of
life.
2. There is personal injury that requires
medical attention beyond first aid.
3. There is property damage to boats or
other property over a certain amount.
4. There is complete loss of a boat.
Contact local law enforcement personnel if a
report is necessary.
EMU44171
Boat education and training
For U.S.A.
Operators should take a boating safety
course. This may be required in your state.
Many of the organizations listed in the next
section can provide information about cours-
es in your area.
You may also want to consider an Internet-
based program for basic boater education.
The Online Boating Safety Course provided
by the BoatU.S. Foundation, is approved by
the National Association of State Boating
Law Administrators (NASBLA) and recog-
nized by the United States Coast Guard.
Most, but not all, states accept this course to
meet their minimum requirements. While it
cannot replace an in-depth course such as
one offered by the U.S. Coast Guard, U.S.
Power Squadron, or other organization, this
online course does provide a general over-
view of the basics in boating safety, require-
ments, navigation, and operation. Upon
ZMU06025
U6EH32E0.book Page 3 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Safety information
4
successful completion of the course, the user
can download a certificate of completion im-
mediately or, for a small charge, request one
by mail. To take this free course, go to boa-
tus.org.
For Canada
All operators of pleasure craft must illustrate
competency by means of a Pleasure Craft
Operators Card with the exception of Person-
al Water Craft used for rental purposes which
require a rental checklist be completed. Plea-
sure Craft Operators Cards can be obtained
following the completion of a competency
course, with an on-line option. Details can be
found on Transport Canada’s website.
www.tc.gc.ca
EMU33881
Passenger training
Make sure at least one other passenger is
trained to operate the boat in the event of an
emergency.
EMU33891
Boating safety publications
Be informed about boating safety. Additional
publications and information can be obtained
from many boating organizations.
EMU33591
Laws and regulations
Know the marine laws and regulations where
you will be boating- and obey them. Several
sets of rules prevail according to geographic
location, but all are basically the same as the
International Rules of the Road. The rules
presented in the following section are con-
densed- and have been provided for your
convenience only.
Contact the U.S. Coast Guard, the National
Association of State Boating Law Administra-
tors, or your local Power Squadron for a com-
plete set of rules governing the waters in
which you will be using your boat.
EMU44740
Boating organizations
The following organizations provide boating
safety training and information about boating
safety and laws.
In the U.S.A.
United States Coast Guard
Consumer Affairs Staff (G-BC)
Office of Boating, Public, and Consumer Af-
fairs
U.S. Coast Guard Headquarters
Washington, D.C. 20593-0001
http://www.uscgboating.org/
United States Power Squadrons
1-888-FOR-USPS (1-888-367-8777)
http://www.usps.org/
Boat Owners Association of The United
States
1-800-336-BOAT (1-800-336-2628)
http://www.boatus.com/
National Association of State Boating Law
Administrators (NASBLA)
1500 Leestown Road, Suite 330
Lexington, KY 40511 859-225-9497
http://www.nasbla.org/
National Marine Manufacturers Associa-
tion (NMMA)
200 East Randolph Drive
Suite 5100
Chicago, IL 60601
http://www.nmma.org/
Marine Retailers Association of America
155 N. Michigan Ave. Chicago,
IL 60304
http://www.mraa.com/
U6EH32E0.book Page 4 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Safety information
5
In Canada
National Marine Manufacturers Associa-
tion Canada
14 McEwan Drive
Suite 8
Bolton, ON
L7E 1H1
http://www.nmma.org/
In Australia
Boating Industry Association of Australia
http://www.biaa.com.au/
In New Zealand
NZ Marine Industry Association
http://www.nzmarine.com/
EMU33692
Basic boating rules (Rules of
the road)
Just as there are rules that apply when you
are driving on streets and highways, there are
waterway rules that apply when you are driv-
ing your boat. These rules are used interna-
tionally. (For U.S.A.: and are also enforced by
the United States Coast Guard and local
agencies.) You should be aware of these
rules, and follow them whenever you encoun-
ter another vessel on the water.
EMU33702
Steering and sailing rules and sound
signals
Whenever two vessels on the water meet one
another, one vessel has the right-of-way; it is
called the “stand-on” vessel. The vessel that
does not have the right-of-way is called the
“give-way” or “burdened” vessel. These rules
determine which vessel has the right-of-way,
and what each vessel should do.
Stand-on vessel
The vessel with the right-of-way has the duty
to continue its course and speed, except to
avoid an immediate collision. When you
maintain your direction and speed, the other
vessel will be able to determine how best to
avoid you.
Give-way vessel
The vessel that does not have the right-of-
way has the duty to take positive and timely
action to stay out of the way of the Stand-On
vessel. Normally, you should not cross in
front of the vessel with the right-of-way. You
should slow down or change directions brief-
ly and pass behind the other vessel. You
should always move in such a way that the
operator of the other vessel can see what you
are doing.
“The general prudential rule”
This rule is called Rule 2 in the International
Rules and says,
“In obeying and construing these rules due
regard shall be had to all dangers of naviga-
tion and collision, and to any special circum-
stances, which may render a departure from
the above rules necessary in order to avoid
immediate danger.”
In other words, follow the standard rules ex-
cept when a collision will occur unless both
vessels try to avoid each other. If that is the
case, both vessels become “Give-Way” ves-
sels.
EMU25522
Rules when encountering vessels
There are three main situations that you may
encounter with other vessels which could
lead to a collision unless the Steering Rules
are followed:
Meeting: (you are approaching another ves-
sel head-on)
U6EH32E0.book Page 5 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Safety information
6
Crossing: (you are traveling across the other
vessel’s path)
Overtaking: (you are passing or being
passed by another vessel)
In the following illustration, your boat is in the
center. You should give the right-of-way to
any vessels shown in white area (you are the
Give-Way vessel). Any vessels in the shaded
area must yield to you (they are the Give-Way
vessels). Both you and the meeting vessel
must alter course to avoid each other.
Meeting
If you are meeting another power vessel head
on, and are close enough to run the risk of
collision, neither of you has the right-of-way
Both of you should alter course to avoid an
accident. You should keep the other vessel
on your port (left) side. This rule doesn’t apply
if both of you will clear one another if you con-
tinue on your set course and speed.
Crossing
When two power driven vessels are crossing
each other’s path close enough to run the risk
of collision, the vessel which has the other on
the starboard (right) side must keep out of the
way of the other. If the other vessel is on your
right, you must keep out of its way; you are
the Give-Way vessel. If the other vessel is on
your port (left) side, remember that you
should maintain course and direction, provid-
ed the other vessel gives you the right-of-way
as it should.
Overtaking
If you are passing another vessel, you are the
“Give-Way” vessel. This means that the other
vessel is expected to maintain its course and
speed. You must stay out of its way until you
are clear of it. Likewise, if another vessel is
passing you, you should maintain your speed
and direction so that the other vessel can
steer itself around you.
EMU25532
Other special situations
There are three other rules you should be
aware of when driving your boat around other
vessels.
Narrow channels and bends
When navigating in narrow channels, you
should keep to the right when it is safe and
practical to do so. If the operator of a power-
driven vessel is preparing to go around a
bend that may obstruct the view of other wa-
U6EH32E0.book Page 6 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Safety information
7
ter vessels, the operator should sound a pro-
longed blast on the whistle (4 to 6 seconds).
If another vessel is around the bend, it too
should sound the whistle. Even if no reply is
heard, however, the vessel should still pro-
ceed around the bend with caution. If you
navigate such waters with your boat, you will
need to carry a portable air horn, available
from local marine supply stores.
Fishing vessel right-of-way
All vessels that are fishing with nets, lines or
trawls are considered to be “fishing vessels”
under the International Rules. Vessels with
trolling lines are not considered fishing ves-
sels. Fishing vessels have the right-of-way
regardless of position. Fishing vessels can-
not, however, impede the passage of other
vessels in narrow channels.
Sailing vessel right-of-way
Sailing vessels should normally be given the
right-of-way. The exceptions to this are:
1. When the sailing vessel is overtaking the
power-driven vessel, the power-driven
vessel has the right-of-way.
2. Sailing vessels should keep clear of any
fishing vessel.
3. In a narrow channel, a sailing vessel
should not hamper the safe passage of a
power-driven vessel that can navigate
only in such a channel.
Reading buoys and other markers
The waters of the United States are marked
for safe navigation by the lateral system of
buoyage. Simply put, buoys and markers
have an arrangement of shapes, colors, num-
bers and lights to show which side of the
buoy a boater should pass on when navigat-
ing in a particular direction. The markings on
these buoys are oriented from the perspec-
tive of being entered from seaward (the boat-
er is going towards the port). This means that
red buoys are passed on the starboard (right)
side when proceeding from open water into
port, and black buoys are to port (left) side.
When navigating out of port, your position
with respect to the buoys should be reversed;
red buoys should be to port and black buoys
to starboard.
Many bodies of water used by boaters are
entirely within the boundaries of a particular
state. The Uniform State Waterway Marking
System has been devised for these waters.
This system uses buoys and signs with dis-
tinctive shapes and colors to show regulatory
or advisory information. These markers are
white with black letters and orange boarders.
They signify speed zones, restricted areas,
danger areas, and general information.
Remember, markings may vary by geograph-
ic location. Always consult local boating au-
thorities before driving your boat in unfamiliar
waters.
U6EH32E0.book Page 7 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

Safety information
8
ZMU01708
U6EH32E0.book Page 8 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

General information
9
EMU25172
Identification numbers record
EMU40381
Outboard motor serial number
The outboard motor serial number is
stamped on the label attached to the port
side of the clamp bracket.
Write down your outboard motor serial num-
ber in the spaces provided in the following il-
lustration to assist you in ordering spare parts
from your Yamaha dealer or for reference if
your outboard motor is stolen.
EMU40392
Key number
A main switch key is included with the switch
panel or remote control box. The key identifi-
cation number is stamped on your key as
shown in the illustration. Write down this
number in the space provided for reference
when ordering a new key.
EMU46160
C-Tick label and Manufactured
date label
Engines affixed with this label conform to the
regulations for each country. This label is af-
fixed to the clamp bracket or swivel bracket.
C-Tick label
Engines affixed with this label conform to cer-
tain portion(s) of the Australian Radio Com-
munications Act.
1. Outboard motor serial number location
1. Serial number
2. Model name
3. Motor transom height
4. Approved model code
1
ZMU07733
3412
ZMU01692
1. Key number
1. C-Tick label location
2. Manufactured date label location
1
2
ZMU08036
U6EH32E0.book Page 9 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

General information
10
Manufactured date label
The manufactured date is stamped on the la-
bel for the engines that conform to the regu-
lations for U.S. Environmental Protection
Agency (EPA). The models that manufac-
tured exclusively for the Oceanian countries
may not have manufactured date on the la-
bel.
EMU46132
Compliance mark and manu-
factured date label
Engines affixed with this label conform to the
regulations for each country.
This label is affixed to the clamp bracket or
swivel bracket.
Regulatory Compliance Mark (RCM)
Engines affixed with this mark conform to
certain portion(s) of the Australian Radio
Communications Act.
ICES-002 Compliance Label
Engines affixed with this mark meet all re-
quirements of the Canadian Interference
Causing Equipment Regulations.
ZMU01697
ZMU08150
Manufactured:
1. Compliance mark and manufactured date
label location
1. Regulatory Compliance Mark (RCM)
1. ICES-002 Compliance Label
1
ZMU07736
ZMU08190
1
ZMU08191
1
U6EH32E0.book Page 10 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

General information
11
Manufactured date
The manufactured date is stamped on the la-
bel for the engines that conform to the regu-
lations for U.S. Environmental Protection
Agency (EPA). The models that manufac-
tured exclusively for the Oceanian countries
may not have manufactured date on the la-
bel.
1. Manufactured date
ZMU08192
1
U6EH32E0.book Page 11 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

General information
12
EMU33524
Read manuals and labels
Before operating or working on this outboard motor:
Read this manual.
Read any manuals supplied with the boat.
Read all labels on the outboard motor and the boat.
If you need any additional information, contact your Yamaha dealer.
EMU33834
Warning labels
If these labels are damaged or missing, contact your Yamaha dealer for replacements.
2
1
ZMU07734
U6EH32E0.book Page 12 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

General information
13
EMU34652
Contents of labels
The above warning labels mean as follows.
1
WARNING
EWM01682
Keep hands, hair, and clothing away
from rotating parts while the engine is
running.
Do not touch or remove electrical parts
when starting or during operation.
2
WARNING
EWM01672
Read Owner’s Manuals and labels.
Wear an approved personal flotation de-
vice (PFD).
Attach engine shut-off cord (lanyard) to
your PFD, arm, or leg so the engine
stops if you accidentally leave the helm,
which could prevent a runaway boat.
EMU35133
Symbols
The following symbols mean as follows.
Notice/Warning
12
ZMU06191
ZMU05696
U6EH32E0.book Page 13 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.

General information
14
Read Owner’s Manual
Hazard caused by continuous rotation
Electrical hazard
ZMU05664
ZMU05665
ZMU05666
U6EH32E0.book Page 14 Wednesday, November 19, 2014 2:58 PM
©2019 Yamaha Motor Corporation, U.S.A.