Yealink Yealink SIP-T28P User manual

YHS32 User Guide / Data Sheet
Ver. 1.0
Page 1 of 3
Headset for Yealink SIP-T28 series

YHS32 SIP-T28P
FEATURES
Ultra microphone noise cancelling, Quick disconnection support
330 rotatable microphone boom.
Ultra light weight(only 50g) and comfortable wearing
Strong design, the life of boom rolling even to 30,000 times
Over-the-head style Pliable steel headband, ultra flex design
Large size ear pad, padded T-bar
ActiveProtection safeguards the user from acoustic burst
1x RJ9 headset jack, 1 meter cord line, Quick-disconnect(QD) cord
Transmit Sensitivity: -38.0 dB re. 1 V/Pa
Receiver Sensitivity: 95dB SPL +/-3 dB SPL
Receiver Impedance: 150
Voltage range: 1.0 - 10 V
Net weight: 50g
Accessories: leatherette ear cushion, foam ear cushion,
adjustable clothing clip, headset hanger

YHS32 User Guide / Data Sheet
Ver. 1.0
Page 2 of 3
Figure Description
The headset is equipped with a quick
disconnector. Users can connect
the headset to a special adapter to connect
to your IP phone.
The headset are fitted with a standard
modular connector.
To use the headset models, simply insert
the modular connector into
the headset port of a compatible telephone.
To adjust the headband, lengthen or
shorten the adjustment rod until
it fits comfortably. The click-stop feature
keeps the headband securely
adjusted. Position the headset receivers so
that the foam cushions sit
comfortably over the centre of your ears.
On models with only one receiver, position
the T-bar above your ear.
Hold the receiver securely against your ear
with one hand. With the
other hand, Use the fixed boom, adjust the
microphone to about one
finger distance to your lips.
The clothing clip helps to keep the headset
properly positioned and free from the cord's
weight. Attach the clothing clip at a
comfortable level to liberate your hand.

YHS32 User Guide / Data Sheet
Ver. 1.0
Page 3 of 3
The Yealink YHS32 is compatible with all of the Yealink Enterprise IP phones.
We will take the SIP-T28P for an example to make a brief description.
1
2
3
4
5
6
7
8
9
10
11
T-Bar (limited to one
receiver products)
Adjustable Headband
Adjustment rod
Ear cushion
Click-Stop Turret
Boom
Microphone
Headset Cable
Clothing Clip
Quick disconnector
J9 Modular Connector
Usage:
1. When there is an incoming call to your extension,
press the HEADSET button to answer
it by the headset mode.
2. During a conversion, press the HEADSET button
or pickup the handset, the conversion will switch between
the headset mode and the handset mode.