Yealink YHS32 User manual

Components
1. T-Bar (limited to one receiver products)
2. Adjustable Headband
3. Adjustment rod
4. Ear cushion
5. Click-Stop Turret
6. Boom
7. Microphone
8. Headset Cable
9. Clothing Clip
10. Quick disconnector
11. RJ9 Modular Connector

Connection
Figure Description
The headset is equipped with a quick disconnector. Users can connect
the headset to a special adapter to connect to your IP phone.
The headset are fitted with a standard modular connector.
To use the headset models, simply insert the modular connector into
the headset port of a compatible telephone.
To adjust the headband, lengthen or shorten the adjustment rod until
it fits comfortably. The click-stop feature keeps the headband securely
adjusted. Position the headset receivers so that the foam cushions sit
comfortably over the centre of your ears.
On models with only one receiver, position the T-bar above your ear.
Hold the receiver securely against your ear with one hand. With the
other hand, Use the fixed boom, adjust the microphone to about one
finger distance to your lips.
The clothing clip helps to keep the headset properly positioned and
free from the cord's weight. Attach the clothing clip at a comfortable
level to liberate your hand.

The Yealink YHS32 is compatible with all of the Yealink Enterprise IP phones. We will take
T28P for an example to make a brief description.
Usage:
1. When there is an incoming call to your extension, press the HEADSET button to answer
it by the headset mode.
2. During a conversion, press the HEADSET button or pickup the handset, the conversion
will switch between the headset mode and the handset mode.
©
2009 Yealink Network Technology Co. Ltd.
All
rights reserved.
Version 1.0
www.yealink.com