Yealink T48 User manual

1
Line Keys
Line or
Extension
Keys
Soft Keys
Volume
Loud Speaker
Mute
Transfer
Hold (Private)
Headset
Voicemail
Yealink T48 User Guide
Below is a diagram of a Yealink T48 IP Phone. The features, keys, and functions you will learn
throughout this users guide will be the same across most Yealink phone models.
Line Keys: Allow you to select a line to dial out from or to resume a call you have on hold.
Soft Keys: Stuff like History, Do Not Disturb, Directory, etc.
Volume: Adjusts the volume (ringing and while on the phone)
Loud Speaker: Places a call on loud speaker (or “speakerphone”)
Voicemail: Allows you to edit your voicemail and check messages.
Directory: Stores contacts and lists the extensions of other people.
Hold (Private): Places a call on hold. (Private hold, just for your extension)
Transfer: Allows you to transfer calls.
Conference: Initiates the conferencing function.
Headset: Turns on or off the connection to a wired or wireless headset.
Mute: Mute button while on a call otherwise Do Not Disturb.
Extension Keys: Allows you to select an extension to dial or a call parking slot.

2
The How To’s
Extension Keys:
1. The extension keys (across from the Line Keys) can be programmed to do anything,
like Speed Dial, Call Hold (call parking), etc.
Transfer a Call:
1. While you are on a call, press the transfer button.
2. At this point, you may dial a phone number or extension, or press an extension
button to transfer the call.
a. Please note, if you choose to dial a number or extension you must press the
transfer button again to complete the transfer. You can also push OK/Send.
b. A “B Transfer” or “Blind Transfer” will transfer the call to the extension
instantly, without allowing you to talk to the person first.
Place a Call on Hold (Private hold, just for your extension):
1. While you are on a call, press the hold button.
2. The line will Flash, showing that the call is on hold.
3. Press the flashing line button to resume the call.
Parking a Call (Holding a call that can be picked up from other phones):
1. While on a call, press a Call Park extension key.
2. It will turn Red, showing that the call has been placed on hold and now can be
resumed on a different phone if desired.
3. Press a Red Call Park button to resume the call.
Voicemail:
1. Press the Voicemail button.
2. Follow the instructions that will be told to you by the phone.
a. Press 1 to listen to messages
b. Press 0 to change your voicemail message.
c. “Unavailable Message” is what callers normally hear if you don’t pick up.
d. “Busy Message” is what callers hear when you REJECT their call.
Voicemail Message Options:
Press 5: Repeat Message
Press 6: Next Message
Press 7: Delete
Press 8: Forward message to another extension

3
Troubleshooting Tips:
1. If the phone is ever behaving strangely, Reboot the Phone!
a. To reboot the phone:
i. Unplug the Power Cord from the back of the phone (black and round).
ii. Plug it back in 10 seconds later.
2. If the Internet ever goes out:
a. The phones will no longer function.
b. Email/Call PrimeVOX Support to turn on temporary Call Forwarding.
c. We can also pre-program the system to automatically forward to a cell phone if
the phones go offline.
Technical Support:
Email [e-mail]
If there is an emergency, dial 888-907-1287 for our 24x7 support team.