
C O N T E N T S
ENGLISH
EC Declaration of Conformity 2
Technical Features 3
Dimensions 4
Cutting Diagram 5
Part List 6-28
Spare Part List 29-34
1. General Information 35 & 36
1.1 Introduction 35
1.2 Service Information 35-36
2. Safety 37 & 40
2.1 Safety Symbols and Their Meanings 37
2.2 Accidents Prevention 38
2.3 General Safety Information 38-40
3. Machine’s Description 41
4. Transport of the Machine 42
5. Installation of the Machine 43 & 44
5.1 Preparation 43
5.2 Connecting to Power Source 43-44
6. Machine’s Safety Information 45
7. Operation 46 & 50
7.1 Preparation 46
7.2 Operation 47-50
8. Maintenance, Service and Repair 51 & 54
8.1 Maintenance 51
8.2 Changing the Cutting Tool 51-52
8.3 Changing the Belt 53
8.4 Angular and Run Out Adjustment Control of Saw Blade and Set Square 54
8.5 Adjust the Air Pressure ( Pneumatic Systems ) 54
9. Noisy Emission Values 55
10. Troubleshooting Guide 56
11. Warranty Conditions 57 & 58